PA 72 blazer 4-spd CST part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Another 72 · 03-28-2019, 11:00 PM

How's the left fender?

**1rippen6** · 03-28-2019, 11:19 PM

Quote:

Originally Posted by Another 72

How's the left fender?

I'll get a picture but it has some rust.

402GMC · 03-29-2019, 07:49 AM

Sorry for the delay but I'll have to pass on skip plate and the spare tire Carrier

**undertaker72** · 03-29-2019, 08:08 AM

Quote:

Originally Posted by 1rippen6

Lock out are rough, are you looking for rings and knobs or internals. I have internals already out. Antenna isn't much better, I'll try to pull tomorrow and see if it has any issues.

Alright thank you I just need some blue dial hubs to put on a Suburban I don't have to be super still interested on and them and the antenna pending outcome of your research

**1rippen6** · 03-29-2019, 09:13 AM

Quote:

Originally Posted by 402GMC

Sorry for the delay but I'll have to pass on skip plate and the spare tire Carrier

No problem thanks for letting me know.

bmfm64 · 03-29-2019, 01:51 PM

Any luck on the door pieces?

**jimmy70** · 03-29-2019, 02:21 PM

Dwayne, still waiting for a few pics of the tcase skid plate. Was blazer equipped with NP205 case and is skid plate interchangeable for 4spd and an auto set-up?

402GMC · 03-29-2019, 02:57 PM

I'll have to pass on the skid plate and tire carrier. thanks

**1rippen6** · 03-29-2019, 06:27 PM

Quote:

Originally Posted by bmfm64

Any luck on the door pieces?

Here you go 58 shipped if still interested.

**1rippen6** · 03-29-2019, 06:29 PM

Quote:

Originally Posted by jimmy70

Dwayne, still waiting for a few pics of the tcase skid plate. Was blazer equipped with NP205 case and is skid plate interchangeable for 4spd and an auto set-up?

Yes, 205 case should work on auto or 4 spd

**1rippen6** · 03-29-2019, 06:30 PM

Quote:

Originally Posted by Another 72

How's the left fender?

Here is what the fender looks like

NJKelly · 03-29-2019, 08:12 PM

Any pictures of the seats, I read through the three pages and I don't think anybody's said I'll take them yet. I might have missed it. First in line if they look good. Might be able to pick up in Carlisle. Hold downs and bolts included?

Another 72 · 03-29-2019, 09:13 PM

Quote:

Originally Posted by 1rippen6

Here is what the fender looks like

Dwayne,

That fender looks pretty rough...how is it around the headlight? I'm trying to repair the eyebrow on my 67 fender. The most prominent ridge of the 69-72 fenders looks like the same contour as the 67 eyebrow (see 1st photo). How much would you want just for the portion of the fender ahead of the front of the turn signal and above the bottom of the turn signal (see 2nd photo)?

Rob

**1rippen6** · 03-29-2019, 09:19 PM

Quote:

Originally Posted by Another 72

Dwayne,

That fender looks pretty rough...how is it around the headlight? I'm trying to repair the eyebrow on my 67 fender. The most prominent ridge of the 69-72 fenders looks like the same contour as the 67 eyebrow (see 1st photo). How much would you want just for the portion of the fender ahead of the front of the turn signal and above the bottom of the turn signal (see 2nd photo)?

Rob

How's 10 plus shipping

**1rippen6** · 03-29-2019, 09:20 PM

Quote:

Originally Posted by NJKelly

Any pictures of the seats, I read through the three pages and I don't think anybody's said I'll take them yet. I might have missed it. First in line if they look good. Might be able to pick up in Carlisle. Hold downs and bolts included?

I'll grab some pictures this weekend the rear seat isn't out yet.

Another 72 · 03-29-2019, 09:48 PM

Quote:

Originally Posted by 1rippen6

How's 10 plus shipping

Sounds good if that portion of the fender is solid and shipping to 22191 is reasonable. Let me know.

NJKelly · 03-29-2019, 11:50 PM

Quote:

Originally Posted by NJKelly

Any pictures of the seats, I read through the three pages and I don't think anybody's said I'll take them yet. I might have missed it. First in line if they look good. Might be able to pick up in Carlisle. Hold downs and bolts included?

Ok thanks

**1rippen6** · 03-30-2019, 08:50 AM

Quote:

Originally Posted by undertaker72

Alright thank you I just need some blue dial hubs to put on a Suburban I don't have to be super still interested on and them and the antenna pending outcome of your research

Antenna was junk looks like someone pulled the end off. I may have another, give me a couple days to look for it.

**ShortbedClayton** · 03-30-2019, 02:53 PM

Hey Dwayne. I’m interested in the skid plate and crossmember... I’d be willing to meet up at carlisle spring swap meet in April I believe.. I’ll be going Friday. Could you post pics of crossmember if possible.. assuming that’s the same as a regular crossmember..
Posted via Mobile Device

**1rippen6** · 03-30-2019, 03:39 PM

Quote:

Originally Posted by ShortbedClayton

Hey Dwayne. I’m interested in the skid plate and crossmember... I’d be willing to meet up at carlisle spring swap meet in April I believe.. I’ll be going Friday. Could you post pics of crossmember if possible.. assuming that’s the same as a regular crossmember..
Posted via Mobile Device

Correct same as a regular crossmember without the upper supports and has the holes drilled for the skid plate. The crossmember was beat up pretty good but I have a regular one if that works for you. If so I'll get you some pictures a day next week.

**ShortbedClayton** · 03-30-2019, 05:22 PM

I have a crossmember is its regular one... I’ll just take the skid plate I’d thats ok... as long as its not all bent up... looks to be in good shape. Thanks
Posted via Mobile Device

**1rippen6** · 03-30-2019, 05:28 PM

Quote:

Originally Posted by ShortbedClayton

I have a crossmember is its regular one... I’ll just take the skid plate I’d thats ok... as long as its not all bent up... looks to be in good shape. Thanks
Posted via Mobile Device

Yes, that will work see you at Carlisle.

**ShortbedClayton** · 03-30-2019, 07:55 PM

Quote:

Originally Posted by 1rippen6

Yes, that will work see you at Carlisle.

Awesome.. I’ll keep in touch and see ya then. Looking foreward to meeting another local member..
Posted via Mobile Device

Oldfashioned · 03-31-2019, 09:37 AM

Quote:

Originally Posted by 1rippen6

Here you go 58 shipped if still interested.

If the door pieces for $58 haven’t been sold I’ll take them.

**1rippen6** · 03-31-2019, 11:22 AM

Quote:

Originally Posted by Oldfashioned

If the door pieces for $58 haven’t been sold I’ll take them.

Bmfm64 hasn't been on since I post pictures and a price let me give him a day or so to check them out.

03-28-2019, 11:00 PM	#51
Another 72 Registered User Join Date: Apr 2016 Location: Woodbridge Virginia Posts: 81	Re: 72 blazer 4-spd CST part out How's the left fender? __________________ Rob "1967 Wanna Be" 1972 K5 Blazer

03-29-2019, 07:49 AM	#53
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 404	Re: 72 blazer 4-spd CST part out Sorry for the delay but I'll have to pass on skip plate and the spare tire Carrier

03-29-2019, 01:51 PM	#56
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: 72 blazer 4-spd CST part out Any luck on the door pieces?

03-29-2019, 02:21 PM	#57
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 999	Re: 72 blazer 4-spd CST part out Dwayne, still waiting for a few pics of the tcase skid plate. Was blazer equipped with NP205 case and is skid plate interchangeable for 4spd and an auto set-up?

03-29-2019, 02:57 PM	#58
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 404	Re: 72 blazer 4-spd CST part out I'll have to pass on the skid plate and tire carrier. thanks

03-29-2019, 08:12 PM	#62
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 377	Re: 72 blazer 4-spd CST part out Any pictures of the seats, I read through the three pages and I don't think anybody's said I'll take them yet. I might have missed it. First in line if they look good. Might be able to pick up in Carlisle. Hold downs and bolts included?

03-30-2019, 02:53 PM	#69
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 678	Re: 72 blazer 4-spd CST part out Hey Dwayne. I’m interested in the skid plate and crossmember... I’d be willing to meet up at carlisle spring swap meet in April I believe.. I’ll be going Friday. Could you post pics of crossmember if possible.. assuming that’s the same as a regular crossmember.. Posted via Mobile Device

03-30-2019, 05:22 PM	#71
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 678	Re: 72 blazer 4-spd CST part out I have a crossmember is its regular one... I’ll just take the skid plate I’d thats ok... as long as its not all bent up... looks to be in good shape. Thanks Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.