VT cutting up a 72 k5 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72k5zl1** · 07-22-2013, 10:47 PM

skid plate from other post, second filler and vent with quarter pics for keith, and a high hump

**71blksuper4x4** · 07-22-2013, 10:57 PM

Also interested in hickey tire carrier. I want to put one on the back of my k20. Trevor
Posted via Mobile Device

**lolife99** · 07-22-2013, 11:00 PM

I will take the first fill tube ($50) you listed,... and the ECE panhard brackets ($10).
Let me know a total with shipping.
Thanks.

RideSF · 07-22-2013, 11:59 PM

How's the grill?
Posted via Mobile Device

RideSF · 07-23-2013, 12:00 AM

The 69 grill
Posted via Mobile Device

**72k5zl1** · 07-23-2013, 05:09 AM

Quote:

Originally Posted by RideSF

How's the grill?
Posted via Mobile Device

there are 3 or four, will take pics later. 69-70 and 71-72

k5hart · 07-23-2013, 07:33 AM

Does it have decent front seat belts?

**1rippen6** · 07-23-2013, 08:06 AM

It looks like it may have the carpet hold down strips what condition are they in? Thanks

**72k5zl1** · 07-23-2013, 09:07 PM

seatbelts are gone and hold downs are rough.

**72k5zl1** · 07-23-2013, 09:17 PM

here is second fill pipe and vent. this one will come with an 8"x8" section of quarter to weld in a truck box side to put tank under bed. $120+ride obo. no back seat. floor brackets look ok, can cut sections of floor out as needed. and an extra chunk of rear quarter minus tire brackets. $25+ ride

**1rippen6** · 07-23-2013, 09:19 PM

Rough as in rusty or all bent up any pictures?

**72k5zl1** · 07-23-2013, 09:27 PM

windshield frame looks good. will cut wherever. $150+shipping. ac dash uncut $70+ride. bucket seat brackets as pictured $125 or $550 with seats.

**72k5zl1** · 07-23-2013, 09:38 PM

Quote:

Originally Posted by 1rippen6

Rough as in rusty or all bent up any pictures?

have to look tomorrow again.

**72k5zl1** · 07-23-2013, 09:43 PM

will try to box up stuff tomorrow after work and get shipping info.

**chewysask** · 07-23-2013, 10:29 PM

how is the vertical section of sheetmetal behind the seats?

**72k5zl1** · 07-23-2013, 10:35 PM

good, can take picture tomorrow

**chewysask** · 07-23-2013, 10:59 PM

Sounds good thanks

**72k5zl1** · 07-24-2013, 02:20 PM

Quote:

Originally Posted by lolife99

I will take the first fill tube ($50) you listed,... and the ECE panhard brackets ($10).
Let me know a total with shipping.
Thanks.

need a zip code please.

cleszkie · 07-24-2013, 02:22 PM

How much for the single wall lighting harness(es) - fuse panel to plug and plug to light fixtures? Thanks.

**lolife99** · 07-24-2013, 02:24 PM

Quote:

Originally Posted by 72k5zl1

need a zip code please.

PM sent.

**72k5zl1** · 07-24-2013, 04:17 PM

Quote:

Originally Posted by lolife99

PM sent.

7x8x24" 8lbs $21.90 ups ground

**lolife99** · 07-24-2013, 05:13 PM

Quote:

Originally Posted by 72k5zl1

7x8x24" 8lbs $21.90 ups ground

Looks like I owe you $81.90.
Let me know how to pay you,...

69-72 · 07-24-2013, 06:52 PM

How is the top?
Posted via Mobile Device

warbucket · 07-24-2013, 08:56 PM

Looking for this air shutoff and the plastic nut and centering bolt ( I broke this one) its located inside the pass side cowl. wiper motor clip that holds the wiper arms on the motor and uncut rear tail light harness, the one that goes from the lights to the 4 wire on the frame.

Flint70step · 07-24-2013, 10:45 PM

Pics of front fenders?Mine got taken out by a young female driver.Looking for original paint to keep my patina.I've been looking for a long time

07-22-2013, 10:47 PM	#26
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: cutting up a 72 k5 skid plate from other post, second filler and vent with quarter pics for keith, and a high hump Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

07-22-2013, 10:57 PM	#27
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,148	Re: cutting up a 72 k5 Also interested in hickey tire carrier. I want to put one on the back of my k20. Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

07-22-2013, 11:00 PM	#28
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: cutting up a 72 k5 I will take the first fill tube ($50) you listed,... and the ECE panhard brackets ($10). Let me know a total with shipping. Thanks. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-22-2013, 11:59 PM	#29
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: cutting up a 72 k5 How's the grill? Posted via Mobile Device

07-23-2013, 12:00 AM	#30
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: cutting up a 72 k5 The 69 grill Posted via Mobile Device

07-23-2013, 07:33 AM	#32
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Re: cutting up a 72 k5 Does it have decent front seat belts? __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

07-23-2013, 08:06 AM	#33
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: cutting up a 72 k5 It looks like it may have the carpet hold down strips what condition are they in? Thanks

07-23-2013, 09:07 PM	#34
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: cutting up a 72 k5 seatbelts are gone and hold downs are rough. __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

07-23-2013, 09:17 PM	#35
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: cutting up a 72 k5 here is second fill pipe and vent. this one will come with an 8"x8" section of quarter to weld in a truck box side to put tank under bed. $120+ride obo. no back seat. floor brackets look ok, can cut sections of floor out as needed. and an extra chunk of rear quarter minus tire brackets. $25+ ride Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

07-23-2013, 09:19 PM	#36
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: cutting up a 72 k5 Rough as in rusty or all bent up any pictures?

07-23-2013, 09:27 PM	#37
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: cutting up a 72 k5 windshield frame looks good. will cut wherever. $150+shipping. ac dash uncut $70+ride. bucket seat brackets as pictured $125 or $550 with seats. Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

07-23-2013, 09:43 PM	#39
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: cutting up a 72 k5 will try to box up stuff tomorrow after work and get shipping info. __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

07-23-2013, 10:29 PM	#40
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: cutting up a 72 k5 how is the vertical section of sheetmetal behind the seats?

07-23-2013, 10:35 PM	#41
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: cutting up a 72 k5 good, can take picture tomorrow __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

07-23-2013, 10:59 PM	#42
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: cutting up a 72 k5 Sounds good thanks



Register or Log In To remove these advertisements.

07-24-2013, 02:22 PM	#44
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: cutting up a 72 k5 How much for the single wall lighting harness(es) - fuse panel to plug and plug to light fixtures? Thanks.

07-24-2013, 06:52 PM	#48
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: cutting up a 72 k5 How is the top? Posted via Mobile Device __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

07-24-2013, 08:56 PM	#49
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: cutting up a 72 k5 Looking for this air shutoff and the plastic nut and centering bolt ( I broke this one) its located inside the pass side cowl. wiper motor clip that holds the wiper arms on the motor and uncut rear tail light harness, the one that goes from the lights to the 4 wire on the frame.

07-24-2013, 10:45 PM	#50
Flint70step Registered User Join Date: Jan 2011 Location: Lake Travis,Texas Posts: 586	Re: cutting up a 72 k5 Pics of front fenders?Mine got taken out by a young female driver.Looking for original paint to keep my patina.I've been looking for a long time __________________ 72 Cheyenne Super LWB 350/350 Factory A/C Tilt/Posi White/Med Red/White(on the way) 72 Custom Deluxe Burb(Arizona truck)Nice interior Great patina Project Patina Azul http://67-72chevytrucks.com/vboard/s...d.php?t=467668

Register or Log In To remove these advertisements.