The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Truck Audio

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-30-2014, 05:06 PM   #1
77 lowboy
Registered User
 
Join Date: Jan 2014
Location: toledo oregon
Posts: 17
Question 10 ohm or 4 ohm speakers what?

i dont want to cut dash in 77 so going to use original am fm radio. when shopping for speakers i was told that original speakers were 10 ohm and all new stuff is pretty much 4 ohm. also told to run 4 ohm speakers i would need an amp or i would burn up output on radio. im not really a electronic guru and just want a decent sounding fm radio please help with any info.
77 lowboy is offline   Reply With Quote
Old 03-31-2014, 12:57 AM   #2
ray_mcavoy
Registered User
 
Join Date: Nov 2009
Location: Sherman, ME
Posts: 2,183
Re: 10 ohm or 4 ohm speakers what?

Yes, the 60's & 70's GM/Delco radios were designed for use with 8 to 10Ω speakers and should not be used with the 4Ω speakers that are common nowadays.

It's also important not to operate these older Delco radios without a speaker attached. Due to the way the output transistor is connected to the output transformer, it can see some dangerous inductive feedback when operated without a speaker. Connecting the Delco radio's output to an amplifier with a high imput impedance is similar to operating it without a speaker ... not good. I suppose you could put a resistor in there to provide the necessary load and still connect it to an amp.

Fortunately, you can purchase new 10Ω speakers that will work with your original radio (and fit the stock dash location) from places like S&M Electro-Tech --> http://www.turnswitch.com/speakers.htm I used one of their 4x10 speakers in my 74 Nova and it actually sounds pretty good ... for a 40 year old radio anyway.

Another option would be to use a radio from a slightly newer GM car or truck. It's my understanding that the 79 & newer Delco electronic tuning (ETR) stereos have amplifiers that can safely drive 4Ω speakers. Here's an example --> http://67-72chevytrucks.com/vboard/s...79&postcount=5 I put a stereo like that into Dad's 77 GMC and it was a direct fit (no dash cutting necessary). I did have to add some wiring because the 78-up radios use different plugs and the ETR units need a couple extra wires for the clock/memory and a display dimmer signal.
ray_mcavoy is offline   Reply With Quote
Old 04-10-2014, 11:59 PM   #3
motornut
78K & 79C Jimmys
 
motornut's Avatar
 
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,897
Re: 10 ohm or 4 ohm speakers what?

I used two smaller ones up front,to get left right.
fit right in there
I'd check the junk yard some times you get lucky...i did
Attached Images
   
__________________
John
1978 GMCJimmy4X4-350/203
1979 GMCJimmy4X2-305/350
motornut is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:49 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com