OR 100's of 73/80 pick up and blazer parts F/S - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 04-13-2015, 12:43 PM

Quote:

Originally Posted by texas4x4hoe

Converting my 85 'Burb to early style frontend. I need some grille/trim stuff shipped to 75949. Also could use the wiper arm linkage if you have it.

1x, 73/74 base grill with good tabs…$40.00
1x, 73/80 upper grill trim, minor blemishes...$10.00 each
1x, 73/80 lower grill trim, minor blemishes...$10.00 each
1 pair, 73/78 (6) pair of head light bezels…$15.00
1 lower grill valance…$30.00
1x, (3) wiper motors...$15.00 each
1 pr of vent windows soft ray tinted...$30.00 each

I can do $175.00 for everything on your list. I will have to look and see if I wiper arm linkage and let you know the price. I also need your zip code too get you a price for shipping. Let me know,

Thank you,
Thomas

DLTruck1973 · 04-13-2015, 06:18 PM

Quote:

Originally Posted by 77shorty

Thomas, yes I'll take it....shipping is what it is.....let me know when you want to Paypal...Nice meeting you btw.

Mark

Yes it was nice to meet you as well. What a crazy week there. I will send you a PM with payment information.

Thank you,
Thomas

**blap** · 04-13-2015, 08:19 PM

Still have any wheel well trim?

bamachem · 04-14-2015, 09:09 AM

I didn't read through all the posts but a buddy needs:

73 gauge set
73 gauge bezel w/ AC

Do you have these still available? Please PM or email at bamachem@yahoo.com

DLTruck1973 · 04-14-2015, 11:31 AM

Quote:

Originally Posted by bamachem

I didn't read through all the posts but a buddy needs:

73 gauge set
73 gauge bezel w/ AC

Do you have these still available? Please PM or email at bamachem@yahoo.com

PM sent,

Thank you,
Thomas

DLTruck1973 · 04-14-2015, 11:33 AM

Quote:

Originally Posted by blap

Still have any wheel well trim?

What specifically are you looking for and how nice. I may have a decent set (4)

Shipping is going to hurt from the size of package and distance but I will check with a zip code.

Let me know,
Thomas

**blap** · 04-14-2015, 06:38 PM

Looking for a decent set for a driver.
06010

Thanks for looking!

texas4x4hoe · 04-15-2015, 12:51 AM

Quote:

Originally Posted by DLTruck1973

I can do $175.00 for everything on your list. I will have to look and see if I wiper arm linkage and let you know the price. I also need your zip code too get you a price for shipping. Let me know,

Thank you,
Thomas

I swear I put my zip in my post, guess not. Zip is 75949.

DLTruck1973 · 04-15-2015, 03:19 PM

Quote:

Originally Posted by texas4x4hoe

I swear I put my zip in my post, guess not. Zip is 75949.

OK, here you go. I broke shipping into two packages. The first will have vent windows, wiper motor, headlight bezels.

The other package will be the lower valance, grill and upper and lower grill trim.

Total shipping is going to be $112.78 and the parts total is $175.00 for a grand total of $287.78

Let me know.

Thank you,
Thomas

DLTruck1973 · 04-15-2015, 03:23 PM

Quote:

Originally Posted by blap

Looking for a decent set for a driver.
06010

Thanks for looking!

You basically have to ship these in a radiator box to prevent damage. The last time I quoted, it was $65.00 to ship. I do have a full set of decent driver quality pieces. Not perfect but very usable.

With that said, I can get you an exact quote but they are pricey to ship because of the box size.

Let me know,
Thomas

**blap** · 04-17-2015, 08:36 PM

Guess your right shipping just is too much.Again Thank you for looking!

kSA-GMC · 04-20-2015, 11:08 PM

hahahah i found you. i called you by phone i am person from st joseph mo. i need caro light, fuel selector for 454 engine 6 port, seat buckles for 1977

DLTruck1973 · 04-21-2015, 12:00 AM

Quote:

Originally Posted by kSA-GMC

hahahah i found you. i called you by phone i am person from st joseph mo. i need caro light, fuel selector for 454 engine 6 port, seat buckles for 1977

What number did you call and who did you talk too? I will be more than happy to help you but I will not be able to check on your list until tomorrow.

I want to make sure we deal with your request correctly and need to know if someone else is working on this for you.

Thank you,
Thomas

77shorty · 04-21-2015, 12:08 AM

Quote:

Originally Posted by DLTruck1973

Yes I still have it but it has a nice ding in it. I have a nicer one with black trim that could use paint also.

We will be in space 5100 at the meet and the 3 before it.

See you there. Let me know if you want this.

Thank you,
Thomas

Hi Thomas....just a heads up that I sent you the money for this molding via Paypal....thanks, Mark.

DLTruck1973 · 04-21-2015, 11:43 AM

Quote:

Originally Posted by 77shorty

Hi Thomas....just a heads up that I sent you the money for this molding via Paypal....thanks, Mark.

Hi Mark,

Yes I have your paypal and address. I will get your parts molding shipped today. Still playing catch up from a week off at the swap meet.

Thank you again,
Thomas

LeesTruk · 04-26-2015, 07:36 PM

Interested in the lh. battery tray (73-80), a 19" radiator support cover, and two park light housings. Shipping to CT 06040

Thanks

texas4x4hoe · 04-26-2015, 09:44 PM

Got my parts Thursday. Good doing business with you.

DLTruck1973 · 04-27-2015, 01:24 PM

Quote:

Originally Posted by LeesTruk

Interested in the lh. battery tray (73-80), a 19" radiator support cover, and two park light housings. Shipping to CT 06040

Thanks

Parts total for battery tray, 19 inch support cover and a pair of park light housings is $57.50 and shipping is $40.21 for a total of $97.71.

Let me know and I can get you payment information.

Thank you for the interest,
Thomas

LeesTruk · 04-27-2015, 02:28 PM

Hi Thomas, I'll take them, please

Lee

DLTruck1973 · 04-27-2015, 03:08 PM

Quote:

Originally Posted by LeesTruk

Hi Thomas, I'll take them, please

Lee

Hi Lee,

I will send you a PM with payment details.

Thank you very much,
Thomas

LeesTruk · 04-28-2015, 08:58 AM

Hi Thomas, check your pm's, funds have been sent. Thanks

Lee

**Joesjunk** · 04-28-2015, 04:33 PM

I need a small block, 2 barrel air cleaner assembly for a 75. Also looking for the heat riser tube from the manifold to the air cleaner. I'm not sure what type is correct for this year, the older style, or the one with the air duct that goes to the radiator support? Interested in either of you have one. Thanks, Joe

softballnrd27 · 04-29-2015, 09:32 AM

Can I get a pair of your best headlight buckets? Pics please? Price plus shipping to 76542

DLTruck1973 · 04-29-2015, 07:35 PM

Quote:

Originally Posted by softballnrd27

Can I get a pair of your best headlight buckets? Pics please? Price plus shipping to 76542

I have what you need for $15.00 each plus shipping. Not bad at all with only minor pitting. I can get you photos and a shipping quote tomorrow morning.

Thank you for the interest.
Thomas

DLTruck1973 · 04-29-2015, 07:41 PM

Quote:

Originally Posted by Joesjunk

I need a small block, 2 barrel air cleaner assembly for a 75. Also looking for the heat riser tube from the manifold to the air cleaner. I'm not sure what type is correct for this year, the older style, or the one with the air duct that goes to the radiator support? Interested in either of you have one. Thanks, Joe

Hi Joe,

I have nothing for a 2 barrel air cleaner housing but I do have the tube for the heat riser. I believe that the 2 and 4 barrel are going to be the same tube from 73-78. In 79 they had the cold air tube from the core support. I still have nothing for a 2 barrel 79 and up on the air cleaner housing.

Let me know if this will work for you. I could get it to you in a padded envelope for $27.00 shipped if interested. Also, for the money, I would hot tank this and acid dip it and get it ready for your paint for no additional charge.

Thank you,
Thomas

04-13-2015, 08:19 PM	#128
blap Senior Member Join Date: Nov 2008 Location: bristol,CT Posts: 576	Re: 100's of 73/80 pick up and blazer parts F/S Still have any wheel well trim?

04-14-2015, 09:09 AM	#129
bamachem Registered User Join Date: Aug 2014 Location: Fairhope, AL Posts: 121	Re: 100's of 73/80 pick up and blazer parts F/S I didn't read through all the posts but a buddy needs: 73 gauge set 73 gauge bezel w/ AC Do you have these still available? Please PM or email at bamachem@yahoo.com __________________ 72 K5 Blazer - BCHWGN

04-14-2015, 06:38 PM	#132
blap Senior Member Join Date: Nov 2008 Location: bristol,CT Posts: 576	Re: 100's of 73/80 pick up and blazer parts F/S Looking for a decent set for a driver. 06010 Thanks for looking!

04-17-2015, 08:36 PM	#136
blap Senior Member Join Date: Nov 2008 Location: bristol,CT Posts: 576	Re: 100's of 73/80 pick up and blazer parts F/S Guess your right shipping just is too much.Again Thank you for looking!

04-20-2015, 11:08 PM	#137
kSA-GMC Registered User Join Date: Mar 2011 Location: cookeville tn Posts: 5	Re: 100's of 73/80 pick up and blazer parts F/S hahahah i found you. i called you by phone i am person from st joseph mo. i need caro light, fuel selector for 454 engine 6 port, seat buckles for 1977

04-26-2015, 07:36 PM	#141
LeesTruk Registered User Join Date: Mar 2015 Location: Manchester, CT Posts: 429	Re: 100's of 73/80 pick up and blazer parts F/S Interested in the lh. battery tray (73-80), a 19" radiator support cover, and two park light housings. Shipping to CT 06040 Thanks

04-26-2015, 09:44 PM	#142
texas4x4hoe Registered User Join Date: Jul 2011 Location: Lufkin, Texas Posts: 4	Re: 100's of 73/80 pick up and blazer parts F/S Got my parts Thursday. Good doing business with you.

04-27-2015, 02:28 PM	#144
LeesTruk Registered User Join Date: Mar 2015 Location: Manchester, CT Posts: 429	Re: 100's of 73/80 pick up and blazer parts F/S Hi Thomas, I'll take them, please Lee

04-28-2015, 08:58 AM	#146
LeesTruk Registered User Join Date: Mar 2015 Location: Manchester, CT Posts: 429	Re: 100's of 73/80 pick up and blazer parts F/S Hi Thomas, check your pm's, funds have been sent. Thanks Lee

04-28-2015, 04:33 PM	#147
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: 100's of 73/80 pick up and blazer parts F/S I need a small block, 2 barrel air cleaner assembly for a 75. Also looking for the heat riser tube from the manifold to the air cleaner. I'm not sure what type is correct for this year, the older style, or the one with the air duct that goes to the radiator support? Interested in either of you have one. Thanks, Joe __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

04-29-2015, 09:32 AM	#148
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: 100's of 73/80 pick up and blazer parts F/S Can I get a pair of your best headlight buckets? Pics please? Price plus shipping to 76542 __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.