'74 chevy tach, value? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mkmiller1 · 11-19-2001, 06:46 PM

Saw a tach dash in a 74 or so chevy in a JY. It also had an air pressure gauge too. Are these worth much? Didn't ask the guy how much he would take. Any opinions welcome.
Matthew

bigblock73 · 11-20-2001, 07:59 AM

They are getting harder and harder to find, I would definately suggest picking it up. I have seen dash assemblies at swap meets and the average price was about 150 bones.

**crossy** · 11-20-2001, 06:49 PM

the 1974 had an AMP gauge instead of the common VOLT gauge. the pickups/blazers only used that from 73-75 which really limits buyers. 95% of the ones i sell need volt gauges. the big trucks have an air gauge where the fuel gauge goes in a normal Tach dash set up also. People dont seem to care for that. I commonly see these units cheap at the swap meets. They are not that rare in the big trucks. There were 4,000 and 5,000 RPM tachs in them and plenty of 6 cyl and diesel ones . the 6 cyl ones[those monster V-6's they used] are not calibrated correctly for the typical V-8 truck buyer. DAVE

[This message has been edited by crossy (edited 11-20-2001).]

11-19-2001, 06:46 PM	#1
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	'74 chevy tach, value? Saw a tach dash in a 74 or so chevy in a JY. It also had an air pressure gauge too. Are these worth much? Didn't ask the guy how much he would take. Any opinions welcome. Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

11-20-2001, 07:59 AM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	They are getting harder and harder to find, I would definately suggest picking it up. I have seen dash assemblies at swap meets and the average price was about 150 bones. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

11-20-2001, 06:49 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	the 1974 had an AMP gauge instead of the common VOLT gauge. the pickups/blazers only used that from 73-75 which really limits buyers. 95% of the ones i sell need volt gauges. the big trucks have an air gauge where the fuel gauge goes in a normal Tach dash set up also. People dont seem to care for that. I commonly see these units cheap at the swap meets. They are not that rare in the big trucks. There were 4,000 and 5,000 RPM tachs in them and plenty of 6 cyl and diesel ones . the 6 cyl ones[those monster V-6's they used] are not calibrated correctly for the typical V-8 truck buyer. DAVE [This message has been edited by crossy (edited 11-20-2001).] __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.