MD Blazer front top hold downs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 12-19-2019, 07:54 PM

Been working on these for a while now. Getting hard to find originals anymore so I took the ones off of my original paint 72 and made some up. Spent the coin to buy the exact size punch for my iron worker for the slotted holes as well. 16 gauge black steel cut, bent and mig welded together. Holes punched, bead blasted smooth in the cabinet. I have been trying to get my powder coating setup going but it is still not ready yet so I went ahead and sprayed self etching primer & 3 coats of satin white urethane on 5 sets to get started. If I get the powder coating going soon I am going to try my luck doing the rest of them that way. Price is the same either way. I test fit every one of them on my Blazer so the hope is they fit everyone's without having to open the holes up any but I can't promise everyone's top sits same as mine.

Will sell each pair at $85 shipped conus
If you want new stainless screws to go with them $93 shipped Conus
If you only need screws they are $11.50 per set shipped conus

EDIT: 5.14.20 I am currently out of screws. I will be ordering more in the near future if the demand returns. I also only have 2 sets of hold downs left and not sure I will be making any more

EDIT:8.26.20 SOLD OUT
.Edit: 7.7.22 have several sets on the shelf

12-19-2019, 07:54 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Blazer front top hold downs Been working on these for a while now. Getting hard to find originals anymore so I took the ones off of my original paint 72 and made some up. Spent the coin to buy the exact size punch for my iron worker for the slotted holes as well. 16 gauge black steel cut, bent and mig welded together. Holes punched, bead blasted smooth in the cabinet. I have been trying to get my powder coating setup going but it is still not ready yet so I went ahead and sprayed self etching primer & 3 coats of satin white urethane on 5 sets to get started. If I get the powder coating going soon I am going to try my luck doing the rest of them that way. Price is the same either way. I test fit every one of them on my Blazer so the hope is they fit everyone's without having to open the holes up any but I can't promise everyone's top sits same as mine. Will sell each pair at $85 shipped conus If you want new stainless screws to go with them $93 shipped Conus If you only need screws they are $11.50 per set shipped conus EDIT: 5.14.20 I am currently out of screws. I will be ordering more in the near future if the demand returns. I also only have 2 sets of hold downs left and not sure I will be making any more EDIT:8.26.20 SOLD OUT .Edit: 7.7.22 have several sets on the shelf Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 08-02-2022 at 05:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.