Went back down to NADC today and took pics of my truck!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 01-18-2005, 06:49 PM

I went back down to the Nashville Auto Diesel College today and took several pics of my truck today. Tell me how you guys think it looks.

5150 · 01-18-2005, 06:56 PM

and more.....

stllookn · 01-18-2005, 06:57 PM

That looks like pretty shoddy work to me. I think you had better let them practice on my truck for awhile before they finish yours...PLEASE! Send directions on where to drop off my truck...LOL! Looks sweet!

5150 · 01-18-2005, 06:58 PM

and last one....

weasel29gm · 01-18-2005, 07:00 PM

Lookin' good!!!!!!!

**1970 CST Short Wide** · 01-18-2005, 07:17 PM

Looks great, Love your streering wheel

CHEVYE · 01-18-2005, 07:29 PM

Quote:

Originally Posted by stllookn

That looks like pretty shoddy work to me. I think you had better let them practice on my truck for awhile before they finish yours...PLEASE! Send directions on where to drop off my truck...LOL! Looks sweet!

for real!!! i live 45 miles from there. is there any way i can get a deal on a paint job? i`ll even buy materials. lookin good.

5150 · 01-18-2005, 07:34 PM

Hey 1970 CST Short Wide-I'll be selling the wheel pretty soon since my interior is black and gray.

oldschooloutlaw · 01-18-2005, 08:37 PM

looks great is that the base coat ?
I wish I was that far along with my project (but then I would have to get aother one)

5150 · 01-18-2005, 08:46 PM

Yeah that's just the base. They were about to wet sand it when I left.

67ChevyC10Stepside · 01-18-2005, 09:03 PM

yeah i was hoping that was the base....is real stripy (spelling)

5150 · 01-18-2005, 09:06 PM

He said that after they laid down the base he made the kids fix all the blemishes. They still have to lay down the GHOST FLAMES!!!! YIPEEEEEEEEE!!!!!!!!!

5150 · 01-18-2005, 09:51 PM

They also forgot to patch that square hole in the driver's door. I'm going to put 6x9's in the doors so the passenger side door is fine.

**Canadian694x4** · 01-18-2005, 10:05 PM

Looking sweet!

**Yukon Jack** · 01-19-2005, 12:20 PM

Looks nice and straight from the pics.

*72CSTC5* · 01-19-2005, 12:28 PM

Yes, just make sure that they get out all of the streaks in the basecoat. It will look very mottled when it gets out in the sun. Spraying silver is very tricky in that there is very little pigment in the paint. Mostly metallics. Hopefully the teacher will give them helpful hints to eliminate that problem. Over reducing and cross hatching usually helps but you have to be careful not to have overspray from the basecoat all over the truck having dry spots all over. Very tricky color.

5150 · 01-19-2005, 12:42 PM

Thanks Yukon Jack

The teacher is a friend of mine and he'll make sure they do it right. That's why they've had it since July!!!!!! He keeps finding things that they should be doing better.

I know one thing-There is not a pin hole of rust on that thing.

Blue Beard · 01-19-2005, 12:46 PM

Looks good so far.

So is this a project for them, and what's the deal on your end (if you don't mind my asking).

I know they use to do them for free at on of the local schools as training and grades. But that's pretty much gone.

GreyHoundSteve · 01-19-2005, 12:51 PM

Looking good. My truck is being painted silver right now too and it is a tricky color. Looks like they are doing good work.

5150 · 01-19-2005, 01:00 PM

The head Collision and Repair Professor lives in my town. I asked some people around town about some bodywork and they recommended me to him. The deal is I can't be in a hurry(JULY!). For someone with absolutely NO PATIENCE that's hard. I just have to pay for materials.

*72CSTC5* · 01-19-2005, 01:04 PM

That's the best kind of job in the bodyshop business. Just make sure they are not wasing materials too, but I guess if the body and paint is pro-bono than you can't complain.

5150 · 01-19-2005, 01:08 PM

Yeah I can't be complaining too much. I guess I forgot to say the best part of it with everybody teasing me about getting their trucks in there. In August they went to a new policy of nothing older than 9 years. So I got grandfathered in. Talk about lucky.

**smitty62** · 01-19-2005, 01:14 PM

Lookin' good!! Ya can't beat those stepsides!

chevyal71 · 01-19-2005, 01:29 PM

You say (July) like it's a bad thing! I wish mine went that quick(almost two years on my blazer) but I can't seem to focus on one project at a time.
That silver with ghost flames will look awesome! Nice Job.

Blue Beard · 01-19-2005, 01:38 PM

I don't think they should limit the age....look at it as a challange.

01-18-2005, 06:49 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Went back down to NADC today and took pics of my truck!!!!! I went back down to the Nashville Auto Diesel College today and took several pics of my truck today. Tell me how you guys think it looks. Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 06:56 PM	#2
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	and more..... Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 06:57 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	That looks like pretty shoddy work to me. I think you had better let them practice on my truck for awhile before they finish yours...PLEASE! Send directions on where to drop off my truck...LOL! Looks sweet! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-18-2005, 06:58 PM	#4
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	and last one.... Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 07:00 PM	#5
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Lookin' good!!!!!!! __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

01-18-2005, 07:17 PM	#6
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,077	Looks great, Love your streering wheel __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-18-2005, 07:34 PM	#8
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Hey 1970 CST Short Wide-I'll be selling the wheel pretty soon since my interior is black and gray. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 08:37 PM	#9
oldschooloutlaw Registered User Join Date: Nov 2004 Location: Last big town in KY before the VA Line Posts: 66	looks great is that the base coat ? I wish I was that far along with my project (but then I would have to get aother one) __________________ Drive fast and Take Chances - In memory of Todd Rowe #725 Fire Chief 96 Chevy K1500 67 Chevelle 70 Chevy C10 - Old Red

01-18-2005, 08:46 PM	#10
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Yeah that's just the base. They were about to wet sand it when I left. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 09:03 PM	#11
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	yeah i was hoping that was the base....is real stripy (spelling) __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

01-18-2005, 09:06 PM	#12
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	He said that after they laid down the base he made the kids fix all the blemishes. They still have to lay down the GHOST FLAMES!!!! YIPEEEEEEEEE!!!!!!!!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 09:51 PM	#13
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	They also forgot to patch that square hole in the driver's door. I'm going to put 6x9's in the doors so the passenger side door is fine. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-18-2005, 10:05 PM	#14
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Looking sweet! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

01-19-2005, 12:20 PM	#15
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Looks nice and straight from the pics. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

01-19-2005, 12:28 PM	#16
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Yes, just make sure that they get out all of the streaks in the basecoat. It will look very mottled when it gets out in the sun. Spraying silver is very tricky in that there is very little pigment in the paint. Mostly metallics. Hopefully the teacher will give them helpful hints to eliminate that problem. Over reducing and cross hatching usually helps but you have to be careful not to have overspray from the basecoat all over the truck having dry spots all over. Very tricky color.



Register or Log In To remove these advertisements.

01-19-2005, 12:42 PM	#17
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Thanks Yukon Jack The teacher is a friend of mine and he'll make sure they do it right. That's why they've had it since July!!!!!! He keeps finding things that they should be doing better. I know one thing-There is not a pin hole of rust on that thing. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-19-2005, 12:46 PM	#18
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Looks good so far. So is this a project for them, and what's the deal on your end (if you don't mind my asking). I know they use to do them for free at on of the local schools as training and grades. But that's pretty much gone. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-19-2005, 12:51 PM	#19
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	Looking good. My truck is being painted silver right now too and it is a tricky color. Looks like they are doing good work.

01-19-2005, 01:00 PM	#20
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	The head Collision and Repair Professor lives in my town. I asked some people around town about some bodywork and they recommended me to him. The deal is I can't be in a hurry(JULY!). For someone with absolutely NO PATIENCE that's hard. I just have to pay for materials. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-19-2005, 01:04 PM	#21
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	That's the best kind of job in the bodyshop business. Just make sure they are not wasing materials too, but I guess if the body and paint is pro-bono than you can't complain.

01-19-2005, 01:08 PM	#22
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Yeah I can't be complaining too much. I guess I forgot to say the best part of it with everybody teasing me about getting their trucks in there. In August they went to a new policy of nothing older than 9 years. So I got grandfathered in. Talk about lucky. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-19-2005, 01:14 PM	#23
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Lookin' good!! Ya can't beat those stepsides! __________________ Stepsides look like real trucks! Smitty

01-19-2005, 01:29 PM	#24
chevyal71 Registered User Join Date: Feb 2003 Location: central ny Posts: 44	You say (July) like it's a bad thing! I wish mine went that quick(almost two years on my blazer) but I can't seem to focus on one project at a time. That silver with ghost flames will look awesome! Nice Job.

01-19-2005, 01:38 PM	#25
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	I don't think they should limit the age....look at it as a challange. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

Register or Log In To remove these advertisements.