Typhoon Blazer handling questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 03-12-2008, 10:29 PM

Hey guys I'm from the 67-72 section but a co-worker has a Typhoon s10 Blazerthat he is real unhappy with the handling. He says it is real sloppy and the rear shifts bad under hard GO PEDDAL action. He asked me to give him a hand tweeking it for him and I think we will start with all new busings front and rear and check steering joints and so no. After that I am at a loss as to what works best for these vehicals. Do you guys have any imput that I can look into. He is not looking for a G-machine or anything but just wants it to respectfull street truck that does not regret driving around.

Thanks for the help!

Kevin
LFD Inc.

70rs/ss · 03-13-2008, 12:17 AM

Check out Summit for good quality urethane bushings and check the steering components, beyond that there are tons of perf susp parts available for the S10/typhoon vehicles. Lowered and stiffer springs, brakes, bushings, etc etc.

1990SSchevy65 · 03-16-2008, 01:47 AM

You and your friend need to check out www.syty.net nothing but syclones, typhoons, and sogt.

Rokcrln · 03-16-2008, 07:55 AM

Quote:

Originally Posted by 1990SSchevy65

You and your friend need to check out www.syty.net nothing but syclones, typhoons, and sogt.

Thanks for the link I will check it out and put a game plan together for him.

Kevin
LFD Inc.

68C15 · 03-16-2008, 11:48 PM

we have a customer with one. over 200K on the clock and it does the same thing. I imagine the leaves are walking apart under accelleration along with all the bushings having seen better days.

68GMCCustom · 03-17-2008, 06:00 AM

That truck is AWD, and was designed to handle fairly well...

03-12-2008, 10:29 PM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Typhoon Blazer handling questions Hey guys I'm from the 67-72 section but a co-worker has a Typhoon s10 Blazerthat he is real unhappy with the handling. He says it is real sloppy and the rear shifts bad under hard GO PEDDAL action. He asked me to give him a hand tweeking it for him and I think we will start with all new busings front and rear and check steering joints and so no. After that I am at a loss as to what works best for these vehicals. Do you guys have any imput that I can look into. He is not looking for a G-machine or anything but just wants it to respectfull street truck that does not regret driving around. Thanks for the help! Kevin LFD Inc.

03-13-2008, 12:17 AM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Typhoon Blazer handling questions Check out Summit for good quality urethane bushings and check the steering components, beyond that there are tons of perf susp parts available for the S10/typhoon vehicles. Lowered and stiffer springs, brakes, bushings, etc etc.

03-16-2008, 01:47 AM	#3
1990SSchevy65 Registered User Join Date: Jul 2004 Location: Houston, TX Posts: 109	Re: Typhoon Blazer handling questions You and your friend need to check out www.syty.net nothing but syclones, typhoons, and sogt. __________________ 2003 Chevrolet CCSB 4x4 1500HD Mine 2011 Toyota Corolla S Wife's new ride 2002 Pontiac Grand Am SE2 Wrecked/Totaled 2014 1990 Chevrolet 454SS GONE 02/26/11 1991 S10 SCSB GONE 12/24/08 1965 Chevrolet LB GONE 06/06/05 GM for life

03-16-2008, 11:48 PM	#5
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Typhoon Blazer handling questions we have a customer with one. over 200K on the clock and it does the same thing. I imagine the leaves are walking apart under accelleration along with all the bushings having seen better days.

03-17-2008, 06:00 AM	#6
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Typhoon Blazer handling questions That truck is AWD, and was designed to handle fairly well... __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.