PA 72 blazer 4-spd CST part out - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6768chevylover · 02-26-2020, 05:53 PM

Quote:

Yes, I can have it ready for then

That sounds awesome Dwayne. Gives me an excuse to go to the swap meet.. Mike

jaros44sr · 03-14-2020, 11:38 AM

need the steering column brace pic in post #35, is it still avaliable?

**1rippen6** · 03-14-2020, 01:43 PM

Quote:

Originally Posted by jaros44sr

need the steering column brace pic in post #35, is it still avaliable?

I should have several, I'll get a picture later today.

**PDXk5** · 03-14-2020, 04:23 PM

Rippen,
Do you still have the seats? I’m in need of this rod. Also, are the AC parts any good, I’m looking for a few pieces.

**1rippen6** · 03-14-2020, 07:11 PM

Quote:

Originally Posted by PDXk5

Rippen,
Do you still have the seats? I’m in need of this rod. Also, are the AC parts any good, I’m looking for a few pieces.

I sold all my bucket seats but there is a forum member repoping them. If you can't find them let me know and I'll look for it. I do have some a/c parts just depends on what you need.

AJs72K5 · 03-18-2020, 07:58 PM

Any brake pedal return springs on hand? Need one for my 72 K5

**1rippen6** · 03-19-2020, 03:41 PM

Quote:

Originally Posted by AJs72K5

Any brake pedal return springs on hand? Need one for my 72 K5

Are you talking about the one for the e-brake?

AJs72K5 · 03-19-2020, 03:53 PM

Quote:

Originally Posted by 1rippen6

Are you talking about the one for the e-brake?

No sir. The brake pedal. It's up inside the brake pedal assembly. Attaches from the brake light switch arm on the pedal to the backside of the assembly..... or something like that.

**1rippen6** · 03-19-2020, 04:02 PM

Quote:

Originally Posted by AJs72K5

No sir. The brake pedal. It's up inside the brake pedal assembly. Attaches from the brake light switch arm on the pedal to the backside of the assembly..... or something like that.

Ok, I'll look again tomorrow.

**1rippen6** · 03-20-2020, 07:18 PM

Quote:

Originally Posted by KevJim72

I'll pass on the cover at this time....how about screws for the latches/hold downs?

Quote:

Originally Posted by AJs72K5

No sir. The brake pedal. It's up inside the brake pedal assembly. Attaches from the brake light switch arm on the pedal to the backside of the assembly..... or something like that.

I found what you talking about but the first one I was looking at was missing it also. Let me look in my hardware bins this weekend

AJs72K5 · 03-20-2020, 08:54 PM

Quote:

Originally Posted by 1rippen6

I found what you talking about but the first one I was looking at was missing it also. Let me look in my hardware bins this weekend

Sounds good. Thanks!

**1rippen6** · 03-18-2020, 07:59 PM

I'm not sure, I'll look tomorrow.

KevJim72 · 03-19-2020, 01:49 PM

Looking for 6 good bolts for latch hatches, 6 bolts for rear top hold downs. Also, the latch handle cover plate.

**1rippen6** · 03-19-2020, 01:59 PM

You need the bolts that hold the latches on the hatch? I should have top bracket bolts and I believe I have a hatch handle cover listed, I'll look and see if I can find it

KevJim72 · 03-19-2020, 02:05 PM

Quote:

Originally Posted by 1rippen6

You need the bolts that hold the latches on the hatch? I should have top bracket bolts and I believe I have a hatch handle cover listed, I'll look and see if I can find it

Correct! Thanks

**1rippen6** · 03-19-2020, 07:11 PM

Quote:

Originally Posted by KevJim72

Correct! Thanks

http://67-72chevytrucks.com/vboard/s...d.php?t=800205

Here is the handle cover I have, it needs some TLC

KevJim72 · 03-19-2020, 07:37 PM

Quote:

Originally Posted by 1rippen6

http://67-72chevytrucks.com/vboard/s...d.php?t=800205

Here is the handle cover I have, it needs some TLC

I'll pass on the cover at this time....how about screws for the latches/hold downs?

**1rippen6** · 03-19-2020, 09:46 PM

Quote:

Originally Posted by KevJim72

I'll pass on the cover at this time....how about screws for the latches/hold downs?

I'll get you some pictures tomorrow.

**1rippen6** · 03-20-2020, 07:17 PM

Quote:

Originally Posted by KevJim72

I'll pass on the cover at this time....how about screws for the latches/hold downs?

Here is what I have

wwjd-5-2 · 03-20-2020, 06:29 AM

Long stretch but in for the Swinging tire carrier 300 +

**1rippen6** · 03-20-2020, 07:15 PM

Quote:

Originally Posted by wwjd-5-2

Long stretch but in for the Swinging tire carrier 300 +

Sorry, gone.

6768chevylover · 03-23-2020, 08:56 PM

[Sounds like spring is not happening did you still want to pick the frame up? I looked it over pretty good today and noticed it has a double shock mount, looks like the drilled some holes in the frame. It also had an aftermarket bumper on the front so they weld brackets on the frame. I didn't get any pictures of that but I can.]

Dwayne- I still want to pick it up. Let me know when your ready and ill figure out a date. Pics of front bumper brackets would be good. Thanks Mike

**1rippen6** · 03-24-2020, 01:00 PM

Quote:

Originally Posted by 6768chevylover

[Sounds like spring is not happening did you still want to pick the frame up? I looked it over pretty good today and noticed it has a double shock mount, looks like the drilled some holes in the frame. It also had an aftermarket bumper on the front so they weld brackets on the frame. I didn't get any pictures of that but I can.]

Dwayne- I still want to pick it up. Let me know when your ready and ill figure out a date. Pics of front bumper brackets would be good. Thanks Mike

I'm working on 1 right now give me a week or so to finish it up then I'll get started on it.

6768chevylover · 03-24-2020, 01:11 PM

[I'm working on 1 right now give me a week or so to finish it up then I'll get started on it.]
Sounds good! Let me know...

**1rippen6** · 03-31-2020, 12:26 PM

Quote:

Originally Posted by 6768chevylover

[I'm working on 1 right now give me a week or so to finish it up then I'll get started on it.]
Sounds good! Let me know...

Forgot about the pictures, here you go. I'm waiting on parts for the one I'm working on so it maybe a little longer

03-14-2020, 11:38 AM	#2
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,428	Re: 72 blazer 4-spd CST part out need the steering column brace pic in post #35, is it still avaliable? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-14-2020, 04:23 PM	#4
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 920	Re: 72 blazer 4-spd CST part out Rippen, Do you still have the seats? I’m in need of this rod. Also, are the AC parts any good, I’m looking for a few pieces. Attached Images

03-18-2020, 07:58 PM	#6
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: 72 blazer 4-spd CST part out Any brake pedal return springs on hand? Need one for my 72 K5 __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

03-18-2020, 07:59 PM	#12
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,711	Re: 72 blazer 4-spd CST part out I'm not sure, I'll look tomorrow.

03-19-2020, 01:49 PM	#13
KevJim72 Registered User Join Date: Jan 2020 Location: COLORADO SPRINGS Posts: 152	Re: 72 blazer 4-spd CST part out Looking for 6 good bolts for latch hatches, 6 bolts for rear top hold downs. Also, the latch handle cover plate.

03-19-2020, 01:59 PM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,711	Re: 72 blazer 4-spd CST part out You need the bolts that hold the latches on the hatch? I should have top bracket bolts and I believe I have a hatch handle cover listed, I'll look and see if I can find it

03-20-2020, 06:29 AM	#20
wwjd-5-2 Registered User Join Date: Mar 2018 Location: Modesto, Cali. 95350 Posts: 191	Re: 72 blazer 4-spd CST part out Long stretch but in for the Swinging tire carrier 300 +

03-23-2020, 08:56 PM	#22
6768chevylover Registered User Join Date: May 2007 Location: nepa Posts: 745	Re: 72 blazer 4-spd CST part out [Sounds like spring is not happening did you still want to pick the frame up? I looked it over pretty good today and noticed it has a double shock mount, looks like the drilled some holes in the frame. It also had an aftermarket bumper on the front so they weld brackets on the frame. I didn't get any pictures of that but I can.] Dwayne- I still want to pick it up. Let me know when your ready and ill figure out a date. Pics of front bumper brackets would be good. Thanks Mike

03-24-2020, 01:11 PM	#24
6768chevylover Registered User Join Date: May 2007 Location: nepa Posts: 745	Re: 72 blazer 4-spd CST part out [I'm working on 1 right now give me a week or so to finish it up then I'll get started on it.] Sounds good! Let me know...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.