KS rear disc brake templates and drawings

[petergun]

Hi guy, I'm new to this site. I'm just starting a 71 short bed project and would like a copy of your drawings, I do have a pay pal acount if you take that, thanks Pete

[hilljob26]

sure do.pm sent

[McKenna]

These are very detailed and very well done, I'm just curious if anyone has priced out the calipers and rotors lately, I went in after I recieved my prints and for example

Calipers 126$ + core of 25 x2
Rotor 22$ x2
Pads 24$

Maybe parts are cheaper in the states but in Canada I was looking at over 400$ plus sales tax. once I paid sales tax and fabbed up the plates itd be cheaper for me to buy a kit. what are these parts going for states side?

This is not bashing you hilljob, your drafts are very well done, and without a doubt work well. I'm just curious if this is ballpark or if this gear is going cheaper for you guys?
Posted via Mobile Device

[hilljob26]

last time i bought calipers here they were 36 bucks, and i was able to use any old caliper for a core,,not sure what others have done

[McKenna]

That would be nice! Got to love Canadian inflation, maybe ill check out rock auto.com or look at getting a set from Maine
Posted via Mobile Device

[hilljob26]

i also didnt buy ebrake calipers, i wasnt worried about that,however i think those were 55 each,i think i just purchased front rotors off of a s10 if i remember right.having an automatic i wasnt worried about it on the last one i built, but i did use the ebrake ones on the first couple kits i made up for people

[robs71k5]

I just sent you a pm with payment for a 6 bolt templates and drawings kit with srpenner@hotmail.com as my return Thanks
Posted via Mobile Device

[c1069]

Originally Posted by hilljob26

i also didnt buy ebrake calipers, i wasnt worried about that,however i think those were 55 each,i think i just purchased front rotors off of a s10 if i remember right.having an automatic i wasnt worried about it on the last one i built, but i did use the ebrake ones on the first couple kits i made up for people

Any chance you have a templates for seville ebrake calipers? Or can you design some for it 71 rear end? Those are easy to come by.

Thanks

[HotRod C/10]

No Core here.

http://www.ebay.com/itm/REAR-DISC-BR...item4cf9abd395

Originally Posted by McKenna

These are very detailed and very well done, I'm just curious if anyone has priced out the calipers and rotors lately, I went in after I recieved my prints and for example

Calipers 126$ + core of 25 x2
Rotor 22$ x2
Pads 24$

Maybe parts are cheaper in the states but in Canada I was looking at over 400$ plus sales tax. once I paid sales tax and fabbed up the plates itd be cheaper for me to buy a kit. what are these parts going for states side?

This is not bashing you hilljob, your drafts are very well done, and without a doubt work well. I'm just curious if this is ballpark or if this gear is going cheaper for you guys?
Posted via Mobile Device

[HotRod C/10]

I tried the same rotors for a 77 deVille and they wont slide over my axle the Rotor Hat is like 6 1/4" and the axle is 6 13/16".....what does the NAPA brand hat measure inside?

Answered my own question.

Originally Posted by ihssalky

i was able to use these plans and a pair of 1977 deville rotors to make a 5 lug setup. My axle is a 5x5 pattern with a 3.062 center hub. The 6 lug rotor has a 3.100 center so it is loose and you have to still drill pattern. I spoke to hilljob about this. I guess some axles have a different center hub od. Really the only difference in the setup is that you have to turn down the OD of the axle to 6.190. the only other difference is that the rotor od is .500 smaller so the caliper mounting holes move down aprox .250 on the bracket.

[hilljob26]

Originally Posted by robs71k5

I just sent you a pm with payment for a 6 bolt templates and drawings kit with srpenner@hotmail.com as my return Thanks
Posted via Mobile Device

pm sent

[Dale_Brown]

Hilljob you still around with these templates?

[hilljob26]

Yep..still got some

[GMCJOE]

If you still got some of these ready to go, send me a pm with your info. Thanks.

[hilljob26]

yes,, i just send em electronicly now,,

[javelinmania]

Has anyone successfully used the Eldorado Rear Calipers with the Emergency Brake Successfully? These are cheap on Ebay. If so, what did you use for Rotors and pads?

[GMCJOE]

Pm sent

[engairuph]

What are you charging for the prints and will they work on four wheel drive? What master cylinder and can the self adjusting proportioning valve be used?

[hilljob26]

20 bucks,,i used em on my 4x4, u can use whatever master cylinder and proportioning valve that u can afford,,i personally used a vette master and pro valve