1973 - 1975 two tone options for blazers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eighteenninetytwo · 08-13-2015, 01:13 PM

anyone know what the two tone options were in these years?
Are there paint chip cards that show the two tone options? trying to figure what goes with crimson red base apart from just white?

swissarmychainsaw · 08-13-2015, 02:09 PM

I think I'm about to make your day:

Here are sales brochures that show you the features you can get through the years.
http://brochures.slosh.com/

My best guess is that you could select ANY combo you wanted based on the paint chips below.

eighteenninetytwo · 08-14-2015, 11:12 AM

I kind of liek the idea of two tone Crimosn Red with the desert sand sides and top. Haas anyone ever seen this?

Keith Seymore · 08-14-2015, 11:16 AM

Recommended color combinations are shown in the generic info packets, located in the GM Heritage Center archives.

https://www.gmheritagecenter.com/doc..._Full-Size.pdf

K

eighteenninetytwo · 08-14-2015, 11:27 AM

interesting . The resources here are fabulous and I am very grateful. It appears that on my (Cheyenne) model teh two tone options was only "Frost white" with the Primary color.

swissarmychainsaw · 08-14-2015, 03:32 PM

Quote:

Originally Posted by eighteenninetytwo

I kind of liek the idea of two tone Crimosn Red with the desert sand sides and top. Haas anyone ever seen this?

Arizonak5 · 10-09-2015, 02:38 AM

my old 74 now owned by a buddy in MN

Arizonak5 · 10-09-2015, 02:38 AM

I believe this was 519 wheatland yellow

eighteenninetytwo · 10-18-2015, 09:01 PM

Did Chevrolet ever produce a blazer with teh classic late 70's "wodd siding" look instead of the two tone paint? Wondering if thats possible at all?

swissarmychainsaw · 10-18-2015, 09:51 PM

It was clearly an option, and unlike today, if it was available, you could get it however you wanted it. Meaning on a blazer, truck, etc.

Personally, I would recommend the plaid seats if going with the Wood Grain look:

swissarmychainsaw · 10-18-2015, 10:11 PM

Just reading through the info packet that Seymour posted.

Did you guys realize the base model Blazer only came with the Driver's seat as standard? Never have I seen one like that !

eighteenninetytwo · 10-19-2015, 11:20 AM

Yes i was chuckling at that one seat with teh others as "options. Regarding the wood two tone, i think that on the blazer I may keep it simple with crimson red / white. not sur ethat the wood sides would look good with white top - woudl probably be a bit too busy. NEXT one though. that white suburban with the wood panels sides looks amazing.

68Timber · 10-19-2015, 01:52 PM

Quote:

Originally Posted by eighteenninetytwo

that white suburban with the wood panels sides looks amazing.

Especially with no drip rails. Looks clean.

eighteenninetytwo · 10-19-2015, 01:58 PM

THAT is what makes the difference. that woudl apply to a blazer with hard shell also - just not sure about the wodd side with a white hard or soft top.

08-13-2015, 01:13 PM	#1
eighteenninetytwo Registered User Join Date: Sep 2013 Location: Redwood city, CA Posts: 691	1973 - 1975 two tone options for blazers anyone know what the two tone options were in these years? Are there paint chip cards that show the two tone options? trying to figure what goes with crimson red base apart from just white? Last edited by eighteenninetytwo; 08-13-2015 at 01:23 PM.

08-13-2015, 02:09 PM	#2
swissarmychainsaw Registered User Join Date: Jun 2009 Location: san francisco, ca (east bay) Posts: 674	Re: 1973 - 1975 two tone options for blazers I think I'm about to make your day: Here are sales brochures that show you the features you can get through the years. http://brochures.slosh.com/ My best guess is that you could select ANY combo you wanted based on the paint chips below.

08-14-2015, 11:12 AM	#3
eighteenninetytwo Registered User Join Date: Sep 2013 Location: Redwood city, CA Posts: 691	Re: 1973 - 1975 two tone options for blazers I kind of liek the idea of two tone Crimosn Red with the desert sand sides and top. Haas anyone ever seen this?

08-14-2015, 11:16 AM	#4
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,152	Re: 1973 - 1975 two tone options for blazers Recommended color combinations are shown in the generic info packets, located in the GM Heritage Center archives. https://www.gmheritagecenter.com/doc..._Full-Size.pdf K Attached Images __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

08-14-2015, 11:27 AM	#5
eighteenninetytwo Registered User Join Date: Sep 2013 Location: Redwood city, CA Posts: 691	Re: 1973 - 1975 two tone options for blazers interesting . The resources here are fabulous and I am very grateful. It appears that on my (Cheyenne) model teh two tone options was only "Frost white" with the Primary color.

10-09-2015, 02:38 AM	#7
Arizonak5 Registered User Join Date: Apr 2009 Location: Queen Tuckey! aka Queen Creek, AZ Posts: 149	Re: 1973 - 1975 two tone options for blazers my old 74 now owned by a buddy in MN Attached Images __________________ 1937 Pontiac 2dr 1970 K5 CST 1972 Jimmy 1973 Hickey ent. equipped Blazer 1977 Blazer Chalet #1193

10-18-2015, 09:01 PM	#9
eighteenninetytwo Registered User Join Date: Sep 2013 Location: Redwood city, CA Posts: 691	Re: 1973 - 1975 two tone options for blazers Did Chevrolet ever produce a blazer with teh classic late 70's "wodd siding" look instead of the two tone paint? Wondering if thats possible at all?

10-18-2015, 09:51 PM	#10
swissarmychainsaw Registered User Join Date: Jun 2009 Location: san francisco, ca (east bay) Posts: 674	Re: 1973 - 1975 two tone options for blazers It was clearly an option, and unlike today, if it was available, you could get it however you wanted it. Meaning on a blazer, truck, etc. Personally, I would recommend the plaid seats if going with the Wood Grain look:

10-18-2015, 10:11 PM	#11
swissarmychainsaw Registered User Join Date: Jun 2009 Location: san francisco, ca (east bay) Posts: 674	Re: 1973 - 1975 two tone options for blazers Just reading through the info packet that Seymour posted. Did you guys realize the base model Blazer only came with the Driver's seat as standard? Never have I seen one like that !

10-19-2015, 11:20 AM	#12
eighteenninetytwo Registered User Join Date: Sep 2013 Location: Redwood city, CA Posts: 691	Re: 1973 - 1975 two tone options for blazers Yes i was chuckling at that one seat with teh others as "options. Regarding the wood two tone, i think that on the blazer I may keep it simple with crimson red / white. not sur ethat the wood sides would look good with white top - woudl probably be a bit too busy. NEXT one though. that white suburban with the wood panels sides looks amazing.

10-19-2015, 01:58 PM	#14
eighteenninetytwo Registered User Join Date: Sep 2013 Location: Redwood city, CA Posts: 691	Re: 1973 - 1975 two tone options for blazers THAT is what makes the difference. that woudl apply to a blazer with hard shell also - just not sure about the wodd side with a white hard or soft top.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.