1 ton o4 3/4 ton springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stknrdr2 · 04-23-2003, 03:45 PM

My needs for this truck have changed, I would like to lower it back to original and convert to one ton running gear so I can haul my camper and tow my wheeling rig......Im sick of borrowing the old mans F250...at any rate, what do we all recommend for original height one ton or 3/4 ton springs? I guess an inch or so of lift wouldnt bother me....

I do have a corp 14 bolt rear and a 8 lug dana 44 all lined up.
(yes I know ill have to move the perches on the 14, been there done that)

Boyd Johnson

Longhorn Man · 04-23-2003, 10:38 PM

If you have rear coils, then you'll only be able to do 3/4 ton springs back there since no one tons came with coils.

Blue_71 · 04-23-2003, 10:44 PM

gotta read the signature andy

72 LWB c/10 4wd-Hugger Orange - Frame Off Resto, 350, 4"lift, Auburn Limited Slips Both Axles- 4.56 gears- 35's - HEI - Edelbrock Performer Carb and Intake

for hauling i'd go with 3/4 ton, 1 ton would jar your brains out without a load and 1/2 ton is too soft IMO

Longhorn Man · 04-23-2003, 11:36 PM

dam 4X4 trucks...
Thanks bloo.

Blue_71 · 04-23-2003, 11:48 PM

no prob man, you know i stay on your toes to catch screw ups so i can bug ya later

Longhorn Man · 04-24-2003, 12:08 AM

lol...shut your pie hole before I find the pic I saved of you.

(the one where your a girl)

Blue_71 · 04-24-2003, 12:14 AM

ack!

i forgot about liz making that thing.... i gotta get to work on a pic of you! lol

Longhorn Man · 04-25-2003, 12:10 AM

LOL...like I'd save it...
But now I know who to ask for it...
<insert evil laugh>

04-23-2003, 03:45 PM	#1
stknrdr2 Registered User Join Date: Sep 2002 Posts: 10	1 ton o4 3/4 ton springs My needs for this truck have changed, I would like to lower it back to original and convert to one ton running gear so I can haul my camper and tow my wheeling rig......Im sick of borrowing the old mans F250...at any rate, what do we all recommend for original height one ton or 3/4 ton springs? I guess an inch or so of lift wouldnt bother me.... I do have a corp 14 bolt rear and a 8 lug dana 44 all lined up. (yes I know ill have to move the perches on the 14, been there done that) Boyd Johnson __________________ STKNRDR 72 LWB c/10 4wd-Hugger Orange - Frame Off Resto, 350, 4"lift, Auburn Limited Slips Both Axles- 4.56 gears- 35's - HEI - Edelbrock Performer Carb and Intake. Recently Completed - 700r4/NP208 conversion and vortec heads. Future Goals - Vortec Injection, lowering back to original height, and one ton running gear so's I can haul all my crap. Lifted truck look cool but they are useless for anything but 'wheeling

04-23-2003, 10:38 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	If you have rear coils, then you'll only be able to do 3/4 ton springs back there since no one tons came with coils.

04-23-2003, 11:36 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	dam 4X4 trucks... Thanks bloo.

04-23-2003, 11:48 PM	#5
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	no prob man, you know i stay on your toes to catch screw ups so i can bug ya later

04-24-2003, 12:08 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	lol...shut your pie hole before I find the pic I saved of you. (the one where your a girl)

04-24-2003, 12:14 AM	#7
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	ack! i forgot about liz making that thing.... i gotta get to work on a pic of you! lol

04-25-2003, 12:10 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	LOL...like I'd save it... But now I know who to ask for it... <insert evil laugh>



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.