Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-26-2020, 08:02 PM | #1 | |
Senior Member
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
|
Re: Radio mounting strap and AC clearance question
Quote:
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent |
|
08-27-2020, 04:09 PM | #2 | |
Registered User
Join Date: Feb 2013
Location: GA
Posts: 1,313
|
Re: Radio mounting strap and AC clearance question
Quote:
|
|
09-21-2020, 05:35 PM | #3 |
Registered User
Join Date: Feb 2013
Location: GA
Posts: 1,313
|
Re: Radio mounting strap and AC clearance question
Hey nsb29, the instructions in your kit I had a few questions about. I had previously drilled 4 holes to for CorvetteJims faceplate on the dash before I purchased your box. It looks like I only need to drill 2 more holes at the top to mount your box to the back of the dash. Is this right?
Do you have any step by step pics of how to do an install? The jnuts in the kit I assume clip onto edge of the plastic box you have and then the screws that I am putting through the front faceplate are meant to thread into the jnuts of your box I think. Is there a length of screws to use? The ones I had in the vent assembly kit may be a bit long. You can see the top on in the pic Im attaching. |
09-21-2020, 06:24 PM | #4 |
Senior Member
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
|
Re: Radio mounting strap and AC clearance question
Yes the J nuts clipped onto the edge of the box in alignment with the holes a one inch # 6 screw Use the template that I sent you for the two additional holes after you have installed the box using those two additional screws install the face plate you got from Jim to the other four holes the reason for the additional screws is the help take the wait off the face plate I also recommend installing your vent hose to the box before installing it is a tight fit it difficult to do once installed have found some of the hose varies in size
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent |
09-21-2020, 10:05 PM | #5 |
Registered User
Join Date: Feb 2013
Location: GA
Posts: 1,313
|
Re: Radio mounting strap and AC clearance question
Thanks for the info, I have ordered the vintage air kit and I think it will take a few weeks for them to have it delivered. Ill wait to do the final install once I have it all, good to know about the hoses being installed first. Until then Im trying to get the radio, speaker and vent assembly fitted to see how I can add support to the radio.
|
01-23-2021, 08:20 PM | #6 |
Registered User
Join Date: Feb 2013
Location: GA
Posts: 1,313
|
Re: Radio mounting strap and AC clearance question
Having some trouble with the 2" vent hose in the Vintage air kit and the AC vent box. Is there a trick to expanding the hose? This is the closest Ive gotten.
|
01-24-2021, 12:15 PM | #7 |
Senior Member
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
|
Re: Radio mounting strap and AC clearance question
Here’s a picture of mine with the hoses on I bought a foot of 2 1/2 inch duct hose from the part store back when I made the mold and it went on OK but when I got my vintage air kit it was a real fight I have asked other people that have bought my box and said yes it was tight but they were able to get it on and of course you want a snug fit so that the house stays on I sent you a p.m. with my phone number
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent Last edited by nsb29; 01-24-2021 at 01:31 PM. |
Bookmarks |
|
|