Project N2Deep - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slik69 · 09-22-2008, 04:52 PM

Nice rides.. Just joined. I previously had a 57 bid window that I regret selling and have always wanted another Chevy Truck. Just bought a 69 C10 1/2 ton. Looks nice. May do a frame-off resto down the line, but right now enjoying it everyday.

I lke your trucks.. all. Just curious which is the lucky one to pull the airsream.

Raguemoe · 10-12-2008, 02:41 AM

I finally put in some time on this project. I just picked up a rebuilt 327 motor Friday! I will re-paint it black along with the transmission. I also finished painting/detailing the front frame and re-assembled the suspension and brakes. I will install the new brake lines and block the firewall one more time before I install the motor. Then I can put everything back together.

Raguemoe · 10-13-2008, 02:30 AM

Got some more done today. Front suspension & brakes all together. Cleaned up the front wheels (forgot how shiny they were). Before and after pics of the motor! Need to order a flex plate then I can put the motor & trans in!

abadsvt · 10-13-2008, 11:05 AM

Sweet! About time we get some updates

!! Looking good!

Josh

68chevy68 · 10-13-2008, 01:29 PM

Looking good!, I still want your wheels...lol

my67chevytruck · 10-15-2008, 10:12 AM

looking GOOD. keep at it.

*project 67 sub* · 10-16-2008, 07:56 PM

glad to see you started doing something with it again. i'll bet you cant wait to get it done and start driving the beast.

Raguemoe · 10-19-2008, 11:20 PM

Went to put the motor in and found out CPP gave me two left motor mounts???? Will have to wait until next week to get motor in. Also purchased some 5 lug rallys for the 67-doing a 5 lug disk brake swap & lower it next week!

Raguemoe · 10-26-2008, 02:11 AM

Motor & trans are in! Had to mod the stainless headers and motor mounts to get them to work & installed the new valve covers. Will be picking up an Edelbrock 1406 carb nes week and need to get the water pump gasket. Also will order the driveshaft and air ride setup.

Spray-Bomb · 10-26-2008, 02:13 AM

Sweet

smbrouss70 · 10-26-2008, 02:15 AM

Looks good! I like those valve covers, who makes them?

Raguemoe · 10-26-2008, 02:24 AM

I got them on Ebay. No brand name. I got both valve covers and air cleaner with all hardware for $225!

Raguemoe · 10-26-2008, 02:30 AM

I took my mother to Pomona Auto Swap meet last week and look what she bought! She wanted a beach cruiser for her and the grandkids.

**Palf70Step** · 10-26-2008, 06:25 AM

Cool wagon. Looks like we know where some of the "cruisin" genes came from.

68 short step · 10-26-2008, 10:13 AM

thats awsome.

Raguemoe · 10-26-2008, 11:11 AM

Quote:

Originally Posted by Palf70Step

Cool wagon. Looks like we know where some of the "cruisin" genes came from.

I think it all started with Grandpa. A pic of his one of his rides @ last years Roadster show @Pomona.

ColoradoK5 · 10-27-2008, 09:01 AM

Man your truck is starting to come around. looks really good with a motor in it. Looks like you have been raised around some very cool cars!

*project 67 sub* · 10-27-2008, 06:50 PM

cool wagon and bad a$$ roadster

Raguemoe · 11-02-2008, 03:51 AM

Almost done with the front clip!

ANTHONY 67 · 11-02-2008, 10:12 AM

Man that truck is looking good keep up the good work

68 short step · 11-02-2008, 10:51 AM

lookin good

Raguemoe · 11-14-2008, 12:34 PM

More updates!

**Hart_Rod** · 11-14-2008, 12:50 PM

That's going to be a sweet ride......I'm jealous,

.

abadsvt · 11-14-2008, 12:55 PM

NICE JOB!! That truck is just bad a$$! If it looks good in primer imagine how it is going to look all painted

Josh

Spray-Bomb · 11-14-2008, 01:01 PM

09-22-2008, 04:52 PM	#101
Slik69 Registered User Join Date: Sep 2008 Location: Ogden Utah Posts: 286	Re: Project N2Deep Nice rides.. Just joined. I previously had a 57 bid window that I regret selling and have always wanted another Chevy Truck. Just bought a 69 C10 1/2 ton. Looks nice. May do a frame-off resto down the line, but right now enjoying it everyday. I lke your trucks.. all. Just curious which is the lucky one to pull the airsream.

10-12-2008, 02:41 AM	#102
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep I finally put in some time on this project. I just picked up a rebuilt 327 motor Friday! I will re-paint it black along with the transmission. I also finished painting/detailing the front frame and re-assembled the suspension and brakes. I will install the new brake lines and block the firewall one more time before I install the motor. Then I can put everything back together.

10-13-2008, 02:30 AM	#103
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Got some more done today. Front suspension & brakes all together. Cleaned up the front wheels (forgot how shiny they were). Before and after pics of the motor! Need to order a flex plate then I can put the motor & trans in! Attached Images

10-13-2008, 11:05 AM	#104
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Project N2Deep Sweet! About time we get some updates!! Looking good! Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

10-13-2008, 01:29 PM	#105
68chevy68 Registered User Join Date: Apr 2007 Location: arkansas Posts: 524	Re: Project N2Deep Looking good!, I still want your wheels...lol __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=245203

10-15-2008, 10:12 AM	#106
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project N2Deep looking GOOD. keep at it. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-16-2008, 07:56 PM	#107
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project N2Deep glad to see you started doing something with it again. i'll bet you cant wait to get it done and start driving the beast.

10-19-2008, 11:20 PM	#108
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Went to put the motor in and found out CPP gave me two left motor mounts???? Will have to wait until next week to get motor in. Also purchased some 5 lug rallys for the 67-doing a 5 lug disk brake swap & lower it next week!

10-26-2008, 02:11 AM	#109
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Motor & trans are in! Had to mod the stainless headers and motor mounts to get them to work & installed the new valve covers. Will be picking up an Edelbrock 1406 carb nes week and need to get the water pump gasket. Also will order the driveshaft and air ride setup. Attached Images

10-26-2008, 02:13 AM	#110
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project N2Deep Sweet __________________ Just not low enough... ----------------------------- Sinister Killer

10-26-2008, 02:15 AM	#111
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Project N2Deep Looks good! I like those valve covers, who makes them? __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-26-2008, 02:24 AM	#112
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep I got them on Ebay. No brand name. I got both valve covers and air cleaner with all hardware for $225!

10-26-2008, 02:30 AM	#113
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep I took my mother to Pomona Auto Swap meet last week and look what she bought! She wanted a beach cruiser for her and the grandkids. Attached Images

10-26-2008, 06:25 AM	#114
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,643	Re: Project N2Deep Cool wagon. Looks like we know where some of the "cruisin" genes came from. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 10-26-2008 at 06:26 AM.

10-26-2008, 10:13 AM	#115
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Project N2Deep thats awsome.



Register or Log In To remove these advertisements.

10-27-2008, 09:01 AM	#117
ColoradoK5 Registered User Join Date: Jan 2007 Location: Denver Colorado Posts: 608	Re: Project N2Deep Man your truck is starting to come around. looks really good with a motor in it. Looks like you have been raised around some very cool cars!

10-27-2008, 06:50 PM	#118
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project N2Deep cool wagon and bad a$$ roadster

11-02-2008, 03:51 AM	#119
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep Almost done with the front clip! Attached Images

11-02-2008, 10:12 AM	#120
ANTHONY 67 Registered User Join Date: Aug 2007 Location: FOREST MS Posts: 67	Re: Project N2Deep Man that truck is looking good keep up the good work

11-02-2008, 10:51 AM	#121
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Project N2Deep lookin good

11-14-2008, 12:34 PM	#122
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Project N2Deep More updates! Attached Images

11-14-2008, 12:50 PM	#123
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Project N2Deep That's going to be a sweet ride......I'm jealous, . __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-14-2008, 12:55 PM	#124
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Project N2Deep NICE JOB!! That truck is just bad a$$! If it looks good in primer imagine how it is going to look all painted Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

11-14-2008, 01:01 PM	#125
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project N2Deep __________________ Just not low enough... ----------------------------- Sinister Killer

Register or Log In To remove these advertisements.