What are the Best Fitting Headers for a 67-72 Chev!

[dpysar]

What has everyone been using for headers for a 350. Seem to have some clearance problems with my Hooker headers. Pics would be helpfull if you can also provide them and part numbers you guys are using.

[wh1skea]

I just installed a set of Summit full length headers (Part #SUM-G9006) on the 327 on my 68. Closest thing to a clearance issue I'm having is the clutch linkage rubbing a little on the driver side header.

[dpysar]

Here are my pics with the clearance problems on the bottom frame..

[JointTech]

i have headman longtubes from summit. The cheap non ceramic ones. They fit fine. The only issue is getting number 3 plug out is kind of a ***** but doable. 72 c20/350/auto/AC/PS

[special-K]

I have Headman Torque Steps and they fit fine. I've also had Headman Elites which fit fine. I've never had any headers that didn't fit. I have only had issues with clutch linkage clearance with some headers. On my automatic trucks everything just bolted on.

[shawno72]

...
Posted via Mobile Device

[beach]

The headman elite fit great...just a little tight getting the driver side in place. I disconnected the motor mount to raise the motor a little to keep from scratching the coating on the headers.

[dpysar]

Originally Posted by special-K

I have Headman Torque Steps and they fit fine. I've also had Headman Elites which fit fine. I've never had any headers that didn't fit. I have only had issues with clutch linkage clearance with some headers. On my automatic trucks everything just bolted on.

As you can see on my clearance problems on the bottom frame the headers are touching on both side, these are hooker headers. Do the Headman headers have more clearance on the bottom frame?

[dpysar]

Originally Posted by beach

The headman elite fit great...just a little tight getting the driver side in place. I disconnected the motor mount to raise the motor a little to keep from scratching the coating on the headers.

What tube diameter are you using?

[cdowns]

if it is just clearance problem on the one side// i'd loosen up everything up and lift to take weight of the engine and wiggle stuff for betterer clerance

[dpysar]

Originally Posted by cdowns

if it is just clearance problem on the one side// i'd loosen up everything up and lift to take weight of the engine and wiggle stuff for betterer clerance

Both sides are touching the frame. That's why am asking the question of what others are using for header brands. Thanks anyway..

[dpysar]

Originally Posted by beach

The headman elite fit great...just a little tight getting the driver side in place. I disconnected the motor mount to raise the motor a little to keep from scratching the coating on the headers.

What tube size are you using??

[96blazr]

Hedman Elite Thermal-coated Headers...........Period. Best D**n header for our trucks.
1 5/8 tube with a 3 in. Collector. $330.00 for the pair at Summit.
Part# 69890.

[LakeAnna]

I ordered D-port Sanderson's from ECE and they fit perfect! ECE has the best price I could find.

[beach]

I have the headman elite thermal coated...part #69890...just as 96blazr stated...perfect fit once you get them in place.

[vectorit]

I don't know if Hooker is making headers anymore for our trucks, but I ran a set of Hooker Super Comps in my burb and they fit beautifully. Lots of clearance in the places that were tight, and they went in and out very easy with out having to remove anything but the clutch Z bar (and obviously the spark plugs).

[eldogg]

I read that Hedman just came out with a new mid length header for 67-87 trucks. 1 5/8" part # 69016/69010 or 1 3/4" part # 69026/69020. I think I will be trying a set on my 67.

[Stickman]

I used Doug Thorley and they fit perfect and have never had a leak after about 10,000 mi
Posted via Mobile Device
Posted via Mobile Device

[mahanian]

Originally Posted by 96blazr

Hedman Elite Thermal-coated Headers...........Period. Best D**n header for our trucks.
1 5/8 tube with a 3 in. Collector. $330.00 for the pair at Summit.
Part# 69890.

Originally Posted by beach

I have the headman elite thermal coated...part #69890...just as 96blazr stated...perfect fit once you get them in place.

Do either of you, or anyone else know if they will work with a 67 frame? The 67 frame isn't notched on the inner frame rails around the exhaust area like the 68-72 frames.

[big_al_71]

Originally Posted by Stickman

I used Doug Thorley and they fit perfect and have never had a leak after about 10,000 mi
Posted via Mobile Device
Posted via Mobile Device

+1 on doug thorleys....

[Slinger60]

I broke my motor in with a set of hedman headers they fit fine with no frame rubbing or anything. Waiting on my doug thorley headers hopefully they will be here next week it has been a long wait for em.

[PAWS 72]

I forget what header i'm running, but I have a problem taking #6 plug out. does any one else?

[shawno72]

Anyone notice any differences when running the engine in the six cylinder position or the rear holes?
Posted via Mobile Device

[dpysar]

+Thanks for all the replys guys! What do you think between long tube or short tube headers???

[gearys 5600]

Sandersons on my yellow 69 fit great.