|
11-18-2020, 07:30 PM
|
#1 |
|
Senior Member
 
Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
centering brake pedal
I almost never do a tech thing and perhaps someone has already done this. But, a small thing that has always bothered me is that the auto and manual trans both use the same pedal hanger. When you change a manual to an auto and remove the clutch pedal (just like the factory did) then the brake pedal seems to be very close to the gas pedal. So, to fix this. I removed the clutch arm and cut the pedal off. Then cut the pedal off of the brake arm. Then the two pedals were sectioned and welded to the width of an early Impala power brake pad. The clutch and brake arms share a common hole which when bolted together to align them, I cut them off. The reason is to replace the brake arm with the clutch arm because the clutch arm kicks off to the left, therefore moving the pedal to the left.
If you want to move the brake pedal to the left and have a wider power brake pad, this is one way to do it. I hope some of this makes sense, if not perhaps the pics will. |
|
|
|
11-18-2020, 08:50 PM
|
#2 |
|
Registered User
Join Date: Feb 2013
Location: central California
Posts: 2,726
|
Re: centering brake pedal
Nice, I like that a lot. Too bad my welding skills could prove that mod to be lethal.
|
|
|
|
|
11-19-2020, 12:02 AM
|
#3 |
|
Registered User
Join Date: Apr 2017
Location: Esterhazy, SK
Posts: 80
|
Re: centering brake pedal
Nice work. Can you show us a photo of the setup in the truck and how it looks next to the gas pedal?
|
|
|
|
|
11-19-2020, 09:49 AM
|
#4 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: centering brake pedal
Oh man, that' looks great clemdaddy.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
11-19-2020, 09:55 PM
|
#5 |
|
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: centering brake pedal
Nice work Pop's.
Now I know where I got my mad welding skills. |
|
|
|
|
11-19-2020, 10:25 PM
|
#6 |
|
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,820
|
Re: centering brake pedal
Great Job!!
__________________
MusicMan70 1961 GMC Suburban |
|
|
|
|
11-19-2020, 11:03 PM
|
#7 |
|
64-66 CHEVY JUNKIE
Join Date: Apr 2007
Location: Cypress ,Texas
Posts: 1,516
|
Re: centering brake pedal
Very Nice.. what Year Impala Brake Pedal is that?? 60's ?? Thanks
__________________
1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E  Do It In A Chevrolet
|
|
|
|
|
11-20-2020, 12:39 PM
|
#8 |
|
Senior Member
Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,058
|
Re: centering brake pedal
That's a great idea. A little too late for me but I would have stolen it at the time.
__________________
Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing. 
|
|
|
|
|
11-21-2020, 07:18 PM
|
#9 |
|
Registered User
Join Date: Jan 2011
Location: Tulare, CA
Posts: 731
|
Re: centering brake pedal
Good Job! I feel the same way you do and moved my brake pedal over when I converted my 64 drums to a 73 Disc brake setup. Since I went to Discs I used a 73 pedal though.
|
|
|
|
|
11-21-2020, 09:34 PM
|
#10 |
|
Registered User
Join Date: Dec 2019
Location: Greer Sc
Posts: 216
|
Re: centering brake pedal
Actually started modifying mine today and didnt think about using the clutch pedal to offset it a little to the left like it needs to be.
Now know what I will be doing tomorrow ��.
__________________
1964 C10 - Big window - resto-mod |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
