67 GMC Stepside PROJECT: TEXAS FARM TRUCK - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oregon 1967 GMC · 11-18-2016, 11:37 AM

tackling the brakes and suspension....

Oregon 1967 GMC · 11-24-2016, 01:34 PM

Got the control arms off and ready to clean it up and put it together.

Oregon 1967 GMC · 03-13-2017, 09:38 PM

Been making some progress; New Front Spindles and Disc Brakes. Power Steering, Shocks, new Leaf Springs and cleaned things up a bit.

**GR8-68** · 03-14-2017, 06:26 AM

This is a really cool build glad to see an update, do you have a bed yet? Or what are the plans for one?

Oregon 1967 GMC · 03-14-2017, 09:41 AM

The bed is stepside sitting in garage in pretty good shape. Will put in some oak after paint. Thanks for checking it out!

keetonb25 · 04-11-2017, 10:41 AM

Figured I'd check out your build since you've been following mine. Looks great! You tackled all the things I don't want to do yet ha.

Oregon 1967 GMC · 04-11-2017, 06:08 PM

Somedays I'm not that motivated but try to do a little something every other day or so. During the summer it was nonstop dawn to dusk. I can help you tackle to floor, rocker panels etc if you want any help.

jim-bob · 05-14-2018, 04:05 AM

....HeyMan....What the Hey happened LOL...I was really enjoyin the build but after a year I sure would like to see the finish..You didn't sell it before that happened did you?

Oregon 1967 GMC · 05-21-2018, 03:18 PM

Quote:

Originally Posted by jim-bob

....HeyMan....What the Hey happened LOL...I was really enjoyin the build but after a year I sure would like to see the finish..You didn't sell it before that happened did you?

Didn't sell it just taking a long break. Nothing to update at the moment but thanks for checking in. Will have more to update come summer.

Oregon 1967 GMC · 08-22-2021, 10:11 PM

Back in the saddle again. Been doing things here and there just haven't visited here. Vintage Air is installed and I'm rewiring now. American Autowire is pretty good.

Oregon 1967 GMC · 08-22-2021, 10:13 PM

Why are my photos upside down?

Oregon 1967 GMC · 08-11-2022, 08:32 AM

Gathering momentum....again. Wiring is about done!

Oregon 1967 GMC · 08-11-2022, 08:33 AM

Dang I'm bad at posting pics. Help!

**FRENCHBLUE72** · 08-11-2022, 03:23 PM

Sometimes these things take awhile..

**cericd** · 08-11-2022, 03:32 PM

Quote:

Originally Posted by Oregon 1967 GMC

Dang I'm bad at posting pics. Help!

Yep. Lol! Here ya go.

Oregon 1967 GMC · 08-11-2022, 07:14 PM

Thanks brother

**cericd** · 08-11-2022, 07:50 PM

Quote:

Originally Posted by Oregon 1967 GMC

Thanks brother

Sure! No prob.

**68 C10 Driver** · 08-11-2022, 10:05 PM

The truck is looking great, you're getting there!

Oregon 1967 GMC · 08-13-2022, 08:50 PM

Trial fit grill. Fits great!

**68 C10 Driver** · 08-14-2022, 02:09 PM

The grill looks outstanding, I am digging the grey headlamp bezels, it really gives it a flair.

Looking forward to what is next.

Oregon 1967 GMC · 12-06-2022, 09:21 PM

Still here. Shopping around to get her painted and I'm astounded by the prices. One shop told me $20k just for materials! I'm weighing my options.

Why are my photos always upside down? Little help please.

Oregon 1967 GMC · 12-06-2022, 09:26 PM

More pics

**68 C10 Driver** · 12-06-2022, 10:34 PM

Looking great! Outstanding work. I am doing a bit of a homage to one of my family's ranch trucks used on the cattle ranch in New Mexico back in 1970. I believe it was a 67, but that was a long time ago. I look forward to seeing how things turn out with yours.

Oregon 1967 GMC · 12-06-2022, 11:12 PM

Quote:

Originally Posted by 68 C10 Driver

Looking great! Outstanding work. I am doing a bit of a homage to one of my family's ranch trucks used on the cattle ranch in New Mexico back in 1970. I believe it was a 67, but that was a long time ago. I look forward to seeing how things turn out with yours.

Thank you and good luck with yours. Straight outta McGregor, Texas.

**68 C10 Driver** · 12-07-2022, 05:49 PM

McGregor, I had been there years ago. I grew up in the DFW area in the 60s and 70s. I remember my dad put up a 60 ft antenna tower to get the Cowboy games out of Waco...ch 12 I think.

Go Cowboys!

11-18-2016, 11:37 AM	#26
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK tackling the brakes and suspension.... Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

11-24-2016, 01:34 PM	#27
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Got the control arms off and ready to clean it up and put it together. Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

03-13-2017, 09:38 PM	#28
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Been making some progress; New Front Spindles and Disc Brakes. Power Steering, Shocks, new Leaf Springs and cleaned things up a bit. Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

03-14-2017, 06:26 AM	#29
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK This is a really cool build glad to see an update, do you have a bed yet? Or what are the plans for one? __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-14-2017, 09:41 AM	#30
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK The bed is stepside sitting in garage in pretty good shape. Will put in some oak after paint. Thanks for checking it out! __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

04-11-2017, 10:41 AM	#31
keetonb25 Registered User Join Date: Mar 2016 Location: Clarkston WA Posts: 44	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Figured I'd check out your build since you've been following mine. Looks great! You tackled all the things I don't want to do yet ha.

04-11-2017, 06:08 PM	#32
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Somedays I'm not that motivated but try to do a little something every other day or so. During the summer it was nonstop dawn to dusk. I can help you tackle to floor, rocker panels etc if you want any help. __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

05-14-2018, 04:05 AM	#33
jim-bob Registered User Join Date: Apr 2011 Location: brooks,georgia Posts: 674	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK ....HeyMan....What the Hey happened LOL...I was really enjoyin the build but after a year I sure would like to see the finish..You didn't sell it before that happened did you?

08-22-2021, 10:11 PM	#35
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Back in the saddle again. Been doing things here and there just haven't visited here. Vintage Air is installed and I'm rewiring now. American Autowire is pretty good. Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603 Last edited by Oregon 1967 GMC; 08-25-2021 at 09:32 PM.

08-22-2021, 10:13 PM	#36
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Why are my photos upside down? __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

08-11-2022, 08:32 AM	#37
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Gathering momentum....again. Wiring is about done! Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603 Last edited by Oregon 1967 GMC; 08-11-2022 at 07:19 PM. Reason: Upside down pics

08-11-2022, 08:33 AM	#38
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Dang I'm bad at posting pics. Help! __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

08-11-2022, 03:23 PM	#39
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Sometimes these things take awhile.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-11-2022, 07:14 PM	#41
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Thanks brother __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

08-11-2022, 10:05 PM	#43
68 C10 Driver Senior Member Join Date: Oct 2020 Location: Kathleen, GA Posts: 619	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK The truck is looking great, you're getting there!



Register or Log In To remove these advertisements.

08-13-2022, 08:50 PM	#44
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Trial fit grill. Fits great! Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

08-14-2022, 02:09 PM	#45
68 C10 Driver Senior Member Join Date: Oct 2020 Location: Kathleen, GA Posts: 619	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK The grill looks outstanding, I am digging the grey headlamp bezels, it really gives it a flair. Looking forward to what is next.

12-06-2022, 09:21 PM	#46
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Still here. Shopping around to get her painted and I'm astounded by the prices. One shop told me $20k just for materials! I'm weighing my options. Why are my photos always upside down? Little help please. Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

12-06-2022, 09:26 PM	#47
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 435	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK More pics Attached Images __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

12-06-2022, 10:34 PM	#48
68 C10 Driver Senior Member Join Date: Oct 2020 Location: Kathleen, GA Posts: 619	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK Looking great! Outstanding work. I am doing a bit of a homage to one of my family's ranch trucks used on the cattle ranch in New Mexico back in 1970. I believe it was a 67, but that was a long time ago. I look forward to seeing how things turn out with yours.

12-07-2022, 05:49 PM	#50
68 C10 Driver Senior Member Join Date: Oct 2020 Location: Kathleen, GA Posts: 619	Re: 67 GMC Stepside PROJECT: TEXAS FARM TRUCK McGregor, I had been there years ago. I grew up in the DFW area in the 60s and 70s. I remember my dad put up a 60 ft antenna tower to get the Cowboy games out of Waco...ch 12 I think. Go Cowboys!

Register or Log In To remove these advertisements.