The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-06-2018, 02:21 PM   #76
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: 1967 Chevelle

I'm on the fence on black wheels also...on some things they look good...a lot don't...at least from the angle of your pics it would look killer. ..there's a local truck (56furd) about the color of your chevelle with black wheels....it looks great...I'm using stock rims on my IH build and they only come in black....I can't make up my mind to leave em or pc em white....I'm going dark red....
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 05-07-2018, 09:08 PM   #77
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 1967 Chevelle

That looks so nice. It would be nice if some of these wheel places would start doing a black chrome on wheels IMO.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 05-13-2018, 07:17 PM   #78
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

I managed to make some progress this weekend in spite of being busy with quite a few other things. I got the rear end under the car, and the rear suspension in, along with the Detroit Speed frame braces. I left the rear sway bar off for now, I may or may not even run it. The rear of the car is sitting about .75" higher than final ride height will be. I stuck the rear tire in there to see how it's going to look, and I really think I'm going to like the way it sits. I'm going to rent the wheel fitment tool tomorrow and hopefully have wheels ordered by the end of the week. With my shop being on the small side, I really need to get the car off blocks so I can move it around.
Here's a picture of the 9" and the Ridetech rear suspension. I'll get a few more later.
Attached Images
 
__________________
1970 SWB Build

Last edited by jmking9; 05-13-2018 at 07:23 PM.
jmking9 is offline   Reply With Quote
Old 05-13-2018, 07:34 PM   #79
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: 1967 Chevelle

nice.....
and diesel...they do make wheels in the black chrome...I saw them on some wheel site ...and theres a new red chevy crewcab, thats lowered, here local that has a set of black chrome wheels...it looks killer...
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 05-13-2018, 07:42 PM   #80
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

A few more
Attached Images
     
__________________
1970 SWB Build

Last edited by jmking9; 05-13-2018 at 07:50 PM.
jmking9 is offline   Reply With Quote
Old 05-22-2018, 02:40 PM   #81
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 1967 Chevelle

That suspension is killer! If places start doing black chrome on their wheels, my 71 Camaro and 40 Ford would be getting some. Your rear end came from not all that far from me.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 05-23-2018, 11:21 PM   #82
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Thanks Ryan! You should check out the black chrome and black pearl finish that Forgeline has.
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 06-08-2018, 09:08 PM   #83
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Small update, I got wheels ordered and they should be done in 5 or 6 weeks. In the meantime I'm going to tackle a few small projects that I've been putting off. First is replacing the steering column with a tilt. Im learning that 67's have quite a few 1 year only parts on them. One of them is the steering column. So after looking for an oem tilt for a few months, I ended up just ordering an Ididit column. I think putting the original style levers on it, and painting it to match the dash will hide some of the aftermarket look. I ordered an installation kit for a power steering box with a 13/16" 36 spline input shaft. But of course it doesn't fit. Having the Jeep Grand Cherokee box requires ordering the kit for a .75" 30 spline input that is the same as the factory manual steering box. Oh the joys of car building Here's a picture of the column (still needs painted)
Attached Images
 
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 06-08-2018, 09:36 PM   #84
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

One of the other projects I've been dreading was figuring out a clutch pedal and the hydraulic setup to make it all work. The best thing I found as far as fool proof alignment of the pedal and master cylinder was this kit from Mcleod. It includes the firewall bracket, and a new clutch pedal that is designed just for their bracket to keep everything in line. It also comes with the master cylinder, braided line, and the reservoir. I was pretty disappointed when I opened the box and seen the parts didn't look quite like they did in the picture. Much more plastic.
I mocked it up and got the firewall cut to allow the master to pass through. I also mocked up the new clutch pedal and everything looks like it lines up perfectly. So I guess I'm going to just live with the plastic master cylinder since this kit really seems to take the guess work out of the part of equation. I was also wrong in thinking that I could just modify the original auto brake pedal to work. So I need a pedal out of a manual transmission car, which is also hard to find. The only thing I can find is a repop kit that has a brake and clutch pedal. So it looks like I will have to buy the kit just to get the brake pedal.
The other problem I've ran into is that the top studs on the pedal box are too short now that I have the added brackets from the clutch master, and the brake prop valve that bolt on using the studs. But that shouldn't be too difficult to solve. Here are a few pictures from trial fitting the brake and clutch masters. I was worried that the clutch master might interfere with where the brake lines need to run into the prop valve, but it looks like it will be fine
Attached Images
   
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 07-19-2018, 06:16 PM   #85
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

I got the upper studs taken care of, and cleaned up the pedal box. I also had to modify the spacer in the McLeod clutch linkage to line up perfectly with the master. To stay on par with every other part that goes on this car that needs modified, the pushrod for the brake master had to be lengthened. So I now have all of the pedals and steering column figured out and mounted in the car. Next will be building some brake lines to got from the prop valve to the frame.
Attached Images
    
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 07-19-2018, 11:31 PM   #86
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Wheels showed up! Forgeline GA3C 18x8 and 18x10 centers are satin gunmetal with polished lips.
Attached Images
    
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 07-20-2018, 03:09 PM   #87
greystoke
Registered User
 
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
Re: 1967 Chevelle

Nice!!
__________________
"Fear makes the wolf look bigger"

http://67-72chevytrucks.com/vboard/s...d.php?t=305629
greystoke is offline   Reply With Quote
Old 07-20-2018, 04:44 PM   #88
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: 1967 Chevelle

Very nice....those should look killer on the velle...
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 07-20-2018, 10:36 PM   #89
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Tires mounted and wheels on. Rolled it out of the shop for the first time in a while. It felt good to get it on wheels again.
Attached Images
    
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 07-29-2018, 09:03 PM   #90
thelonerife
Senior Member
 
thelonerife's Avatar
 
Join Date: Jul 2007
Location: Clarksville TN 37043
Posts: 8,702
Re: 1967 Chevelle

Beautiful car!! Great job!!
thelonerife is offline   Reply With Quote
Old 07-31-2018, 05:23 PM   #91
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 1967 Chevelle

Killer work and great job! Those wheels look sweet. Boy those babies aren't cheap are they? I was looking at that Mcloud kit for my Camaro and if I go with a 5 or 6 speed later on I might get it.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 07-31-2018, 10:29 PM   #92
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Quote:
Originally Posted by thelonerife View Post
Beautiful car!! Great job!!
Thank you! I appreciate it

Quote:
Originally Posted by Dieselwrencher View Post
Killer work and great job! Those wheels look sweet. Boy those babies aren't cheap are they? I was looking at that Mcloud kit for my Camaro and if I go with a 5 or 6 speed later on I might get it.
Thanks Ryan. They are definitely not cheap. But I have to say, the quality and attention to detail on them is first class. But at their pricepoint, they should be.
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 08-21-2018, 09:50 PM   #93
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

I took a couple weeks off working on the car to do a project on the house. Once that was out of the way, I went to work building the brake hard lines and getting flex lines. I got those wrapped up last weekend. I pushed the car out to clean the shop and took what I thought was a cool picture of my truck with the Chevelle in the background.
Attached Images
    
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 08-26-2018, 10:01 PM   #94
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Space is limited in my small shop, so I put the hood on just to lower the chances of it being damaged while sitting on the fender stand. It makes it look so close, but I know it's sooo far away
Attached Images
  
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 12-01-2018, 10:16 PM   #95
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Haven't posted anything here in a while, but i'm still slowly working on the Chevelle. I've been working on few house remodeling projects that has taken up my spare time. But I have still managed to get a few things here and there done to the car.
Attached Images
  
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 12-04-2018, 06:52 PM   #96
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,059
Re: 1967 Chevelle

It's a long journey to make them the way you want. Yours is coming out fantastic. I've owned my 66 SS since 1984. Still doing things to it.
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 12-17-2018, 07:35 PM   #97
tune_1
Registered User
 
Join Date: Oct 2013
Location: Oklahoma City Okla
Posts: 196
Re: 1967 Chevelle

Looks great

Dwight
tune_1 is offline   Reply With Quote
Old 06-16-2019, 11:07 PM   #98
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

Wow, it's been a while since I updated this thread. For a variety of reasons that I won't bore any of you with, I haven't been working on the car much over the last several months. But I'm getting back on it. Last week I got the transmission In from Silver Sport. It's a tko600 with the .64 OD. A friend of mine had a 454 long block laying around and let me borrow it for mock up. Im going to instal all of it in the car so I'll know where, and how much of the transmission tunnel to cut. I'll post updates as I move along
Attached Images
   
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Old 06-17-2019, 07:52 AM   #99
MP&C
Registered User
 
MP&C's Avatar
 
Join Date: Jan 2013
Location: Leonardtown, MD
Posts: 1,630
Re: 1967 Chevelle

Looking good, keep plugging away at it....
__________________
Robert
MP&C is offline   Reply With Quote
Old 07-14-2019, 12:25 AM   #100
jmking9
Registered User
 
jmking9's Avatar
 
Join Date: Sep 2006
Location: Riverton KS
Posts: 832
Re: 1967 Chevelle

I installed the engine and transmission and cut the tunnel to clear the tko600. I broke a piece of 18 gauge into a 2'x3' rectangle and bent it around an electrical pole to get the basic shape I needed. From there, I just slowly cut, and formed it into exactly what I needed. It's worth mentioning that while I was building the tunnel, the trans tail shaft about 2 or 3 degrees higher than where it should be. I did this just to make certain I had plenty of clearance.
Attached Images
  
__________________
1970 SWB Build
jmking9 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com