KS Parting a 70 custom 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 09-12-2014, 04:26 PM

Im parting this truck starting this weekend.
It will take untill next weekend to finish it off.
Im keeping the column, motor w/accessories and the transmission linkage.
Its rusty but has alot of parts left to give.
Everything else is up for grabs.
gauges 30
seatbelts 30
auto brake pedal 25
auto crossmember 30
radio knobs, radio, hardware...40
door panels 30
arm rests 15
PB booster 25

Everything is plus shipping
anything else just ask.

**Cash3481** · 09-12-2014, 04:27 PM

more inside pics

beetle1960 · 09-12-2014, 04:57 PM

Heck...that ain't rusty..its cool. Wanna see rust come on over to my part of town..

**cst204x4** · 09-12-2014, 05:11 PM

ac bracket with adjusting slot in it. sell separate?

Mr.chivo · 09-12-2014, 05:20 PM

Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

67-72trucks · 09-12-2014, 05:25 PM

Nice Patina

kda2000 · 09-12-2014, 06:16 PM

Mike,

Do you sell the suspension parts? -- Looking for drivers side lower control arm for a 1/2 ton, with the cross shaft and (ideally) a usable ball joint ('68 style), no rust damage. Let me know what you have?

Thanks,
Ken

WCH · 09-12-2014, 06:57 PM

Mike,

I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.

Thanks! Curby

68Bowtie4x4 · 09-12-2014, 06:58 PM

How much for the winshield rear view mirror assy and the rear window rubber seal and trim?

Let me know.

Thanks.

**Cash3481** · 09-12-2014, 07:23 PM

Quote:

Originally Posted by beetle1960

Heck...that ain't rusty..its cool. Wanna see rust come on over to my part of town..

I'm from northern Indiana so I know what your saying!

Quote:

Originally Posted by cst204x4

ac bracket with adjusting slot in it. sell separate?

sorry for now I'm keeping the motor and brackets but I'll post back here if that changes..

Quote:

Originally Posted by Mr.chivo

Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

I'll get the pics for you and post them up.

Quote:

Originally Posted by 67-72trucks

Nice Patina

I'd like to build it but the squirrels really set up camp in this one, check out the motor pics. I love the patina too.

Quote:

Originally Posted by kda2000

Mike,

Do you sell the suspension parts? -- Looking for drivers side lower control arm for a 1/2 ton, with the cross shaft and (ideally) a usable ball joint ('68 style), no rust damage. Let me know what you have?
Thanks,
Ken

I'll sell you this entire front end if you wanna come grab it. Lol
I'll sell this front end pieces once it's dismantled.

Quote:

Originally Posted by WCH

Mike,
I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.
Thanks! Curby

Curby,
I'll get you some pics.

Quote:

Originally Posted by 68Bowtie4x4

How much for the winshield rear view mirror assy and the rear window rubber seal and trim?
Let me know.
Thanks.

have to look at the trim closer when it's removed.$12 for the mirror and $20 for the seal it may not come out easy so I'll see if it does in one piece. I'll take $30 for the window trim. All plus shipping...

chuckmc8 · 09-12-2014, 07:25 PM

Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135
I dont need the master cylinder but would like the prop valve and lines that connect to it

Undone · 09-12-2014, 07:58 PM

I will get in line for windshield and rear window stainless trim.

68Bowtie4x4 · 09-12-2014, 07:59 PM

I'll take the windshield rear view mirror assembly and the rear window seal and stainless trim if the seal and trim come out without any issues.

Let me know.

Thanks.

BLT gmc · 09-12-2014, 08:05 PM

Mike, would you consider pricing the radio knobs and the chrome adjusters behind the knobs separate from the radio. I would like pictures of the radio and knobs, please. Good luck, Bruce

**Cash3481** · 09-13-2014, 12:12 AM

Quote:

Originally Posted by Mr.chivo

Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

pics below of mirrors and several sets of backing plates

Quote:

Originally Posted by WCH

Mike,
I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.
Thanks! Curby

pics below

Quote:

Originally Posted by 68Bowtie4x4

How much for the winshield rear view mirror assy and the rear window rubber seal and trim?
Let me know.
Thanks.

Quote:

Originally Posted by chuckmc8

Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135
I dont need the master cylinder but would like the prop valve and lines that connect to it

Chuck ill mark it as yours... how's $25 for it all plus actual shipping cost?

Quote:

Originally Posted by Undone

I will get in line for windshield and rear window stainless trim.

Windshield trim is still up but I can wait till he decides on the shipping quote tomorrow.

Quote:

Originally Posted by 68Bowtie4x4

I'll take the windshield rear view mirror assembly and the rear window seal and stainless trim if the seal and trim come out without any issues.
Let me know.
Thanks.

these is some small dents in it. Ill get a pic in the am.

Quote:

Originally Posted by BLT gmc

Mike, would you consider pricing the radio knobs and the chrome adjusters behind the knobs separate from the radio. I would like pictures of the radio and knobs, please. Good luck, Bruce

Bruce, do you need the cups too? if so id go $20 shipped for the knobs, adjusters and cups shipped.

**DeadheadNM** · 09-13-2014, 12:20 AM

Mike how's the bumper guard? Pics?

**Cash3481** · 09-13-2014, 12:27 AM

Quote:

Originally Posted by DeadheadNM

Mike how's the bumper guard? Pics?

I believe it's actually in good shape!
I'll get better pics of stuff during the day tomorrow.

I'm going to get a good start on it tomorrow in the am. I have to take a load of scrap around 0900 but I'll have a lot off by then.

Alabama GMC · 09-13-2014, 12:53 AM

How much for the radio

Mr.chivo · 09-13-2014, 02:10 AM

Thanks for the mirror pics, how much do you want for them? I am mainly interested in the arms and backing plates, maybe shipping cost would be cheaper? (less bulky/weight) I need the 67-70 square backing plates.

WhiteWhale · 09-13-2014, 03:23 AM

looking for fresh air vent door, spring and hardware on the passenger side cowel.

chuckmc8 · 09-13-2014, 05:36 AM

Quote:
Originally Posted by chuckmc8
Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135
I dont need the master cylinder but would like the prop valve and lines that connect to it
Chuck ill mark it as yours... how's $25 for it all plus actual shipping cost?

Done! Thanks

**Cash3481** · 09-13-2014, 08:04 AM

Quote:

Originally Posted by Alabama GMC

How much for the radio

Unknown condition... radio $10, power wire $4 plus shipping. Your 2nd on it.

Quote:

Originally Posted by Mr.chivo

Thanks for the mirror pics, how much do you want for them? I am mainly interested in the arms and backing plates, maybe shipping cost would be cheaper? (less bulky/weight) I need the 67-70 square backing plates.

$25 shipped but let me get them off first so you can see the backing plates.

Quote:

Originally Posted by WhiteWhale

looking for fresh air vent door, spring and hardware on the passenger side cowel.

I'll have to inspect this one. $15 shipped

Quote:

Originally Posted by chuckmc8

Quote:
Originally Posted by chuckmc8
Done! Thanks

welcome, headed out there now!

BLT gmc · 09-13-2014, 11:11 AM

Mike,
I will take the entire radio/knobs for 40. Please PM your address, I would like to mail a USPS MO. Thank you, Bruce

chevytruckluver · 09-13-2014, 12:17 PM

Mike, does that truck have one of these hiding behind the rear bumper?

WCH · 09-13-2014, 12:42 PM

Quote:

Originally Posted by WCH

Mike,

I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.

Thanks! Curby

Mike,

How much for the belts, are there 2 or 3? How much for the antenna? Also, looking for a set of sbc A/C pulleys. Shipped 66030

Thanks, Curby

09-12-2014, 04:26 PM	#1
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Parting a 70 custom 10 Im parting this truck starting this weekend. It will take untill next weekend to finish it off. Im keeping the column, motor w/accessories and the transmission linkage. Its rusty but has alot of parts left to give. Everything else is up for grabs. gauges 30 seatbelts 30 auto brake pedal 25 auto crossmember 30 radio knobs, radio, hardware...40 door panels 30 arm rests 15 PB booster 25 Everything is plus shipping anything else just ask. Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness! Last edited by Cash3481; 09-12-2014 at 09:05 PM.

09-12-2014, 04:27 PM	#2
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 70 custom 10 more inside pics Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

09-12-2014, 04:57 PM	#3
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: Parting a 70 custom 10 Heck...that ain't rusty..its cool. Wanna see rust come on over to my part of town.. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-12-2014, 05:11 PM	#4
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: Parting a 70 custom 10 ac bracket with adjusting slot in it. sell separate? __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

09-12-2014, 05:20 PM	#5
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting a 70 custom 10 Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

09-12-2014, 05:25 PM	#6
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: Parting a 70 custom 10 Nice Patina

09-12-2014, 06:16 PM	#7
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: Parting a 70 custom 10 Mike, Do you sell the suspension parts? -- Looking for drivers side lower control arm for a 1/2 ton, with the cross shaft and (ideally) a usable ball joint ('68 style), no rust damage. Let me know what you have? Thanks, Ken

09-12-2014, 06:57 PM	#8
WCH Registered User Join Date: Jan 2014 Location: Olathe, Ks Posts: 48	Re: Parting a 70 custom 10 Mike, I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna. Thanks! Curby __________________ Curby 1972 Cheyenne 10 LWB 350: Lambrect Survivor 1972 Cheyenne 10 4X4 LWB 350

09-12-2014, 06:58 PM	#9
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: Parting a 70 custom 10 How much for the winshield rear view mirror assy and the rear window rubber seal and trim? Let me know. Thanks. __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

09-12-2014, 07:25 PM	#11
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting a 70 custom 10 Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135 I dont need the master cylinder but would like the prop valve and lines that connect to it __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-12-2014, 07:58 PM	#12
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Parting a 70 custom 10 I will get in line for windshield and rear window stainless trim.

09-12-2014, 07:59 PM	#13
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: Parting a 70 custom 10 I'll take the windshield rear view mirror assembly and the rear window seal and stainless trim if the seal and trim come out without any issues. Let me know. Thanks. __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

09-12-2014, 08:05 PM	#14
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,107	Re: Parting a 70 custom 10 Mike, would you consider pricing the radio knobs and the chrome adjusters behind the knobs separate from the radio. I would like pictures of the radio and knobs, please. Good luck, Bruce

09-13-2014, 12:20 AM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,310	Re: Parting a 70 custom 10 Mike how's the bumper guard? Pics? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-13-2014, 12:53 AM	#18
Alabama GMC Registered User Join Date: Apr 2014 Location: mobile Alabama Posts: 40	Re: Parting a 70 custom 10 How much for the radio



Register or Log In To remove these advertisements.

09-13-2014, 02:10 AM	#19
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting a 70 custom 10 Thanks for the mirror pics, how much do you want for them? I am mainly interested in the arms and backing plates, maybe shipping cost would be cheaper? (less bulky/weight) I need the 67-70 square backing plates.

09-13-2014, 03:23 AM	#20
WhiteWhale Registered User Join Date: Apr 2014 Location: Southern California Posts: 200	Re: Parting a 70 custom 10 looking for fresh air vent door, spring and hardware on the passenger side cowel.

09-13-2014, 05:36 AM	#21
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting a 70 custom 10 Quote: Originally Posted by chuckmc8 Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135 I dont need the master cylinder but would like the prop valve and lines that connect to it Chuck ill mark it as yours... how's $25 for it all plus actual shipping cost? Done! Thanks __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-13-2014, 11:11 AM	#23
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,107	Re: Parting a 70 custom 10 Mike, I will take the entire radio/knobs for 40. Please PM your address, I would like to mail a USPS MO. Thank you, Bruce

09-13-2014, 12:17 PM	#24
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Parting a 70 custom 10 Mike, does that truck have one of these hiding behind the rear bumper? Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

Register or Log In To remove these advertisements.