The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > WIW

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-11-2021, 10:29 PM   #1
72 k15
Registered User
 
72 k15's Avatar
 
Join Date: Sep 2018
Location: Fargo
Posts: 376
Good Offer for a 67 4wd 8ft stepside?

Found a cool pretty rare truck I thought I would make a offer on, 67 4wd step side 8 foot bed with a straight six and a 4speed what do you guys think is a decent offer what is the truck worth as it sits? He says he would sell it for the right offer. Has 300k on it. Found it in the middle of no where north Dakota by my farm.
Thanks.
Attached Images
   
__________________
1959 GMC 100 3 on the tree 270.
1968 GMC k2500 Stepside
1972 Chevy Monte Carlo Custom.
72 k15 is offline   Reply With Quote
Old 04-12-2021, 09:08 AM   #2
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 9,980
Re: Good Offer for a 67 4wd 8ft stepside?

Just some thoughts and my $0.02 on your questions.

Myself, I tend to shy away from making the initial offer on another person's property, be it a vehicle, parts or whatever. It is the buyer's usual thoughts to go low and the seller's usual thoughts they want to go high. Invariably this usually gets to be an issue with feelings in a wad so to speak. I always tell the seller I don't feel right about pricing another man's property. Have him give you a beginning price point and then the negotiations can start from that point depending on his starting price and how that figures in with your expectations of purchase costs.

Before I even get to that point on a vehicle I verify that the seller has a clear title in his name for the vehicle. Make sure the VIN on the title matches the VIN on the vehicle. On these trucks it is VERY easy to swap the glove box door where the VIN is on the SIPD label. Am thinking there is a "partial" VIN with the last numbers of the VIN on the LH frame upper near the steering gear box. May have a lot of crud that needs wire brushing to clean off for visibility. Without a clear title, to me it automatically makes said vehicle a "parts only" sale. A parts only sale brings a lower price as there can be a considerable amount of hoops to jump thru if intending to title the vehicle for use. I realize that some states do not require a title on vehicles of a certain age, only a Bill of Sale so your situation depends on your particular state DMV.

Those two points said, it looks like the truck is in pretty fair condition for it's age. No pics of the interior and engine bay but.....depending on how badly a person wants something it's generally nothing that a LOT of time, $$$ and beer can't solve. I proved that when I restored my '71 long bed 4x4, LOL.

Good luck with your negotiations and possible purchase.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 04-12-2021, 12:55 PM   #3
72 k15
Registered User
 
72 k15's Avatar
 
Join Date: Sep 2018
Location: Fargo
Posts: 376
Re: Good Offer for a 67 4wd 8ft stepside?

Quote:
Originally Posted by Ironhorse View Post
Just some thoughts and my $0.02 on your questions.

Myself, I tend to shy away from making the initial offer on another person's property, be it a vehicle, parts or whatever. It is the buyer's usual thoughts to go low and the seller's usual thoughts they want to go high. Invariably this usually gets to be an issue with feelings in a wad so to speak. I always tell the seller I don't feel right about pricing another man's property. Have him give you a beginning price point and then the negotiations can start from that point depending on his starting price and how that figures in with your expectations of purchase costs.

Before I even get to that point on a vehicle I verify that the seller has a clear title in his name for the vehicle. Make sure the VIN on the title matches the VIN on the vehicle. On these trucks it is VERY easy to swap the glove box door where the VIN is on the SIPD label. Am thinking there is a "partial" VIN with the last numbers of the VIN on the LH frame upper near the steering gear box. May have a lot of crud that needs wire brushing to clean off for visibility. Without a clear title, to me it automatically makes said vehicle a "parts only" sale. A parts only sale brings a lower price as there can be a considerable amount of hoops to jump thru if intending to title the vehicle for use. I realize that some states do not require a title on vehicles of a certain age, only a Bill of Sale so your situation depends on your particular state DMV.

Those two points said, it looks like the truck is in pretty fair condition for it's age. No pics of the interior and engine bay but.....depending on how badly a person wants something it's generally nothing that a LOT of time, $$$ and beer can't solve. I proved that when I restored my '71 long bed 4x4, LOL.

Good luck with your negotiations and possible purchase.
What do you think the value of the truck is if he has a title and vin all matches? I guess im just trying to see a rough price estimate here.
__________________
1959 GMC 100 3 on the tree 270.
1968 GMC k2500 Stepside
1972 Chevy Monte Carlo Custom.
72 k15 is offline   Reply With Quote
Old 04-12-2021, 01:34 PM   #4
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 9,980
Re: Good Offer for a 67 4wd 8ft stepside?

IF it runs and drives AND the title and VIN numbers all match I would say $2,500, possibly up to $3,000 if the interior is not completely ragged out and frame not rusted out. More than that, tread lightly and depends on how bad you want it. Cab supports, cab corners and rocker panels are very prone to rust out. Cab floor against the kick panels is another area of concern as are roof and cab areas.

If not running, no title and some SERIOUS rust issues in mentioned areas to me it's getting closer to being a parts truck. If you can get it titled thru a bill of sale and some footwork and effort -- $1,200 - $1,500 If unable to title in your name it's a parts truck and in my thoughts maybe $800 max. That is if it has some parts that are still usable.

I may be all totally off with these thoughts as have not bought a project truck in some time. I know values have gone up even on parts trucks but if planning on a restoration be advised, IT AIN"T CHEAP to do. Good luck and let us know how it works out.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 04-12-2021, 02:51 PM   #5
72 k15
Registered User
 
72 k15's Avatar
 
Join Date: Sep 2018
Location: Fargo
Posts: 376
Re: Good Offer for a 67 4wd 8ft stepside?

Quote:
Originally Posted by Ironhorse View Post
IF it runs and drives AND the title and VIN numbers all match I would say $2,500, possibly up to $3,000 if the interior is not completely ragged out and frame not rusted out. More than that, tread lightly and depends on how bad you want it. Cab supports, cab corners and rocker panels are very prone to rust out. Cab floor against the kick panels is another area of concern as are roof and cab areas.

If not running, no title and some SERIOUS rust issues in mentioned areas to me it's getting closer to being a parts truck. If you can get it titled thru a bill of sale and some footwork and effort -- $1,200 - $1,500 If unable to title in your name it's a parts truck and in my thoughts maybe $800 max. That is if it has some parts that are still usable.

I may be all totally off with these thoughts as have not bought a project truck in some time. I know values have gone up even on parts trucks but if planning on a restoration be advised, IT AIN"T CHEAP to do. Good luck and let us know how it works out.
Yeah ill have to look at the rust from what I could tell it was pretty rusty, Ill ask him what he would want for it and go from there. I know he has the title and he says it runs but something to the effect that it sorta knocks until it warms up.
__________________
1959 GMC 100 3 on the tree 270.
1968 GMC k2500 Stepside
1972 Chevy Monte Carlo Custom.
72 k15 is offline   Reply With Quote
Old 04-12-2021, 05:52 PM   #6
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,681
Re: Good Offer for a 67 4wd 8ft stepside?

I probably wouldn't go over a grand on it. I would let him throw out the first number. If he has been watching the auctions lately, he may think he has a gem.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 04-12-2021, 05:58 PM   #7
Ironhorse
Senior Member
 
Ironhorse's Avatar
 
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 9,980
Re: Good Offer for a 67 4wd 8ft stepside?

Quote:
Originally Posted by too much stuff View Post
I probably wouldn't go over a grand on it. I would let him throw out the first number. If he has been watching the auctions lately, he may think he has a gem.
Listen to Eric, he "knows" these trucks and deals with them much more than I do. He is most likely a lot closer in gauging the true value than I am. Again, let the present owner throw out the first numbers. That number will give you some insight as to where his thoughts are on the value. He may be watching too much Barrett/Jackson - Mecum- Russo & Steele and other auctions.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8
Was sm465-now 350TH/np205
Tilt, Tach, Towhooks
Original Truck AM/FM
Wellington, Ks
Ironhorse is offline   Reply With Quote
Old 04-13-2021, 01:20 AM   #8
68bowtie
Senior Member
 
68bowtie's Avatar
 
Join Date: Jan 2007
Location: Turlock, CA
Posts: 8,237
Re: Good Offer for a 67 4wd 8ft stepside?

I agree $800-1,500, and let the seller go first.
__________________
I live in California, but identify as a Texan
"If a job's worth doing, it's worth doing well"

Project "Little Sister" (70 c10 blue original paint refresh)
Project "C10 Fever" (68 factory black 396 swb)
Project "Blue Bomb" (70 c30 blue original paint refresh)
Project "Vitamin C" (71 c10 orange original paint refresh)
68bowtie is offline   Reply With Quote
Old 04-13-2021, 12:35 PM   #9
72 k15
Registered User
 
72 k15's Avatar
 
Join Date: Sep 2018
Location: Fargo
Posts: 376
Re: Good Offer for a 67 4wd 8ft stepside?

1500 max it is, If I buy it ill post up some better pictures. From my research they made 500 8ft stepsides with 4x4 in 67.
__________________
1959 GMC 100 3 on the tree 270.
1968 GMC k2500 Stepside
1972 Chevy Monte Carlo Custom.
72 k15 is offline   Reply With Quote
Old 04-14-2021, 03:49 PM   #10
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,921
Re: Good Offer for a 67 4wd 8ft stepside?

In '67 were they still NAPCO conversions? Or were the 4x4's straight from the factory?

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 04-14-2021, 07:35 PM   #11
72 k15
Registered User
 
72 k15's Avatar
 
Join Date: Sep 2018
Location: Fargo
Posts: 376
Re: Good Offer for a 67 4wd 8ft stepside?

Quote:
Originally Posted by GASoline71 View Post
In '67 were they still NAPCO conversions? Or were the 4x4's straight from the factory?

Gary
59 was the last year Chevy used Napco.
__________________
1959 GMC 100 3 on the tree 270.
1968 GMC k2500 Stepside
1972 Chevy Monte Carlo Custom.
72 k15 is offline   Reply With Quote
Old 10-13-2023, 06:32 PM   #12
72 k15
Registered User
 
72 k15's Avatar
 
Join Date: Sep 2018
Location: Fargo
Posts: 376
Re: Good Offer for a 67 4wd 8ft stepside?

Just to update this thread the company that had the truck new bought it for 7500. They are still in business' and are doing VERY well. Truck is now sitting outside in their gated yard.
__________________
1959 GMC 100 3 on the tree 270.
1968 GMC k2500 Stepside
1972 Chevy Monte Carlo Custom.
72 k15 is offline   Reply With Quote
Old 10-13-2023, 10:01 PM   #13
dmb
Active Member
 
dmb's Avatar
 
Join Date: Sep 2023
Location: randolph va
Posts: 115
Re: Good Offer for a 67 4wd 8ft stepside?

one of my favorite sayings, man , I cant buy it and sell it too. Give me a price.
dmb is offline   Reply With Quote
Old 10-16-2023, 03:08 PM   #14
chewychevy67
Registered User
 
Join Date: Jan 2010
Location: Here
Posts: 5,394
Re: Good Offer for a 67 4wd 8ft stepside?

That's a sentimental 7500. Guy hit the jackpot on that sale.
chewychevy67 is online now   Reply With Quote
Old 10-16-2023, 09:18 PM   #15
a1vintage69
Senior Member
 
a1vintage69's Avatar
 
Join Date: Apr 2015
Location: Redding, Ca.
Posts: 3,901
Re: Good Offer for a 67 4wd 8ft stepside?

that old truck has been beat pretty hard, ranch and farm trucks are always rough. offer $500 and if he says no let him know it's a standing offer if he changes his mind and then walk away. He might counter offer for $800. long steppers are a hard resell.
a1vintage69 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:50 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com