The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > Diesel Conversions

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-25-2012, 09:43 PM   #51
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

did a little work today.

gutted a beat up dodge.





the engine has the beautiful cake of oil/coal dust in the oily areas. holy crap. next weekend its going for a solid power wash



i also think i found a good strait rust free bed locally for a very good price...

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-01-2012, 10:48 AM   #52
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

had alot of running around to do yesterday. i think i drove 160 miles and never left La Plata county. i did manage to accomplish a couple things.

i got this hauled to the car wash and blasted a thousand pounds of grime away



i also borrowed an engine hoist. hopefully later today i can maybe do something with that.

i got all the remnants of broken dodge scraped out of my driveway. i am sure the neighbors are proud of that.

then, in fine form my white truck had to make a rescue run



my buddies powerstroke started retching oil. talk about a heavy long MFer. that is now beached in my driveway and is part of todays project.

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-03-2012, 11:14 PM   #53
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

since i spent most of the time i had allotted for mocking up the engine sunday trying to fix a bleeding ford, i decided to play around a bit tonight.

it is sitting on blocks under the pan on top of the springs.



this is no where near final position just got it under there and off the hoist so i can fiddle with position and all that.



current engine mount system...



it will all end up a little further back and it has to come up in the front but this is pretty close to the height of the back of the trans. looks like the floor is going to get the custom touch as well as the firewall



ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-04-2012, 03:21 PM   #54
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

Looking good! It'll ride like that for a few bounces. And yeah, those super dutys are heavy!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-04-2012, 11:02 PM   #55
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

thanks

spent a few minutes after work today and whacked out some stuff for the engine mounts.

hopefully i can add some of the more vital stuff to it tomorrow and give a better idea of the finished product. some of the additional ingredients are visible in the second photo





ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-05-2012, 06:05 PM   #56
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

Very nice. Are the bushings energy suspension bushings for leaf springs or shackles? I've thought about doing it this way before.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-05-2012, 10:28 PM   #57
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

they are leaf spring t-bushings. im not sure the brand but they are poly.

i got some more work on the engine mounts done.





i have a set of red and a set of black... i need to get a set of matching colors.



tried for a weld shot but i cant get my camera to do this well



and on the engine.





ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-05-2012, 11:31 PM   #58
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

Very nice fab work! You hae to love tigs!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-07-2012, 03:16 PM   #59
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

progress this morning

the beginning



WTF



that allowed for this



from the engine side



then with the height and setback of the engine that pesky frame was in my way.



this is like those purple lines the plastic surgeons on tv use to decided where to slice and dice their victims

this is the resulting carnage



i used all of that cutoff wheel that i could

more to come later hopefully. off to the gym and grocery store to stock up for the week

ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-07-2012, 10:49 PM   #60
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

patched up the holes



smoothed it down



ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-17-2012, 11:33 AM   #61
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: 72 k20 project

real nice.
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 04-17-2012, 03:11 PM   #62
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

Very nice work! You going to run a mechanical fan?
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-17-2012, 10:42 PM   #63
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

Thanks guys.

i am planning on the mechanical fan. all of my experience with electrics has been that they are never enough. mechanical fans move air very well. shrouds are easy to make and i will have more than enough room as it looks now.

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-18-2012, 02:53 PM   #64
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

You should have plenty of room for sure now.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-18-2012, 09:45 PM   #65
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

i should hope... i didnt realize i hadn't posted the pics with the engine in its resting place.

the notches in comparison to the parts that got in the way



this is with the fan on so you get an idea of the rad clearance. rad should be roughly centered on the body mts.



ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-18-2012, 10:30 PM   #66
72smoker
Registered User
 
72smoker's Avatar
 
Join Date: Jul 2010
Location: CR IA
Posts: 160
Re: 72 k20 project

Very nice work!
72smoker is offline   Reply With Quote
Old 04-20-2012, 10:48 PM   #67
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: 72 k20 project

Awesome build! I like how you went about boxing the frame!
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 04-21-2012, 01:00 AM   #68
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

thanks.

i still have to finish boxing the rear but i got all twitterpated with m engine mounts so i haven't finished up back there yet. i am going to get a bed for it before to long, so i need to get on it.

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-21-2012, 09:44 PM   #69
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

i kept having issues deciding what transfer case to use and what i was going to do for exhaust kept nagging away at me. so after a little discussion with Ryan and his brother the other night about the strength merits of using the np241 i decided to go that route. most of the 241s out there are drivers side F/O. the solution is to clock the dodge case all funny and rework the oil pickup and the shifter. that sounded like to much of an aggravation to me. my personal solution was...







now i will be able to use the dodge t-case which is not only better able to hold the torque, but as a design attribute is quieter going down the road and shift on the fly. i also have the strength advantage of the reverse cut gears and my driveline angle should be near flat. i can also use a trash can for exhaust and have no fitment issues. that may be the deciding factor in my turbo choice down the road


Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-22-2012, 11:10 AM   #70
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

Ha Ha very nice bro! That's a great score right there! Great work as well, it's coming along real nice! Maybe if we both get ours running this year we can meet up some place.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-22-2012, 11:35 AM   #71
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

Thanks!

i hope i get it up and going this year, but that depends a lot on many other things.

i had the same thought and Lauren(wife) and i will be driving back to iowa when its finished an debugged. the truck was my grandpa's and i really want to give grandma and my dad a ride when its back to being a nice truck inspired by grandpas plans and built to suit me. they are really the only other two people that have any attachment to the truck in my family outside of my mom and sisters who just enjoy the pictures of the build.

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 04-22-2012, 03:54 PM   #72
Tinkermc
Registered User
 
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,027
Re: 72 k20 project

I like what you are doing, kooks very nice
Tinkermc is offline   Reply With Quote
Old 04-23-2012, 11:08 AM   #73
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: 72 k20 project

Quote:
Originally Posted by ryanroo View Post
Thanks!

i hope i get it up and going this year, but that depends a lot on many other things.

i had the same thought and Lauren(wife) and i will be driving back to iowa when its finished an debugged. the truck was my grandpa's and i really want to give grandma and my dad a ride when its back to being a nice truck inspired by grandpas plans and built to suit me. they are really the only other two people that have any attachment to the truck in my family outside of my mom and sisters who just enjoy the pictures of the build.

Ryan
That is very cool! The only person attached to mine is me.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 04-23-2012, 08:29 PM   #74
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: 72 k20 project

my wife is getting interested in mine. She asked for a list of things that she can do on it.
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 04-23-2012, 10:39 PM   #75
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 k20 project

Nice. Lauren likes to hang out and help, and she wants to learn. she just doesn't have much in the way of knowledge.

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com