66 Hood and Bed Fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Afirehawk1 · 11-29-2020, 04:51 PM

Any suggestions on parts house for these that fit the best?
Assuming these parts come from the same manufacturer

Thanks

**The Rocknrod** · 11-29-2020, 05:48 PM

Mar-K for the bed: www.mar-k.com/
LMC sells the hood: https://www.lmctruck.com/chevrolet

rws1012 · 11-29-2020, 06:10 PM

I have 3 hoods in my barn. Too bad you don't live closer to Oklahoma. LOL!! Those are expensive and I bet shipping is pretty high. Good luck.

Afirehawk1 · 11-29-2020, 06:29 PM

Quote:

Originally Posted by rws1012

I have 3 hoods in my barn. Too bad you don't live closer to Oklahoma. LOL!! Those are expensive and I bet shipping is pretty high. Good luck.

Thanks
I have one its just too beat up
Would take more bondo and hammering than its worth

**cwcarpenter98** · 11-30-2020, 12:10 AM

The salesman I talked to at Auto Metal Direct said he has heard a lot of good reviews about the hood they sell. It's way out of this college student's budget though

Afirehawk1 · 12-04-2020, 12:14 PM

Quote:

Originally Posted by The Rocknrod

Mar-K for the bed: www.mar-k.com/
LMC sells the hood: https://www.lmctruck.com/chevrolet

With LMC
Any idea on the metal gauge and part manufacturer?
I called lmc and they wont tell me

**The Rocknrod** · 12-04-2020, 02:04 PM

Call me suspicious but I doubt there are more than one companies actually manufacturing those. Distribution is another thing.

Afirehawk1 · 12-04-2020, 03:31 PM

Quote:

Originally Posted by The Rocknrod

Call me suspicious but I doubt there are more than one companies actually manufacturing those. Distribution is another thing.

I emailed NPD and AMD to inquire.

AMD says the metal is 20 GA on the website.

thanks for the assist!

Afirehawk1 · 12-04-2020, 04:40 PM

Quote:

Originally Posted by Afirehawk1

I emailed NPD and AMD to inquire.

AMD says the metal is 20 GA on the website.

thanks for the assist!

from LMC. wow.

"We apologize for the inconvenience however, we are not able to provide the vendor/manufacture information on our parts due to confidentiality agreements."

**Captainfab** · 12-04-2020, 10:38 PM

There is only 1 or 2 factories in China stamping out these replacement parts. Some companies that put their sticker on the parts have better QC standards than others.

**The Rocknrod** · 12-05-2020, 09:30 AM

I recall emailing a company in Taiwan that was considering making the hoods a few years back. For the life of me I cant seem to find the info now.
Maybe it was these guys - https://en.chlautoparts.com.tw/news.html

11-29-2020, 04:51 PM	#1
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	66 Hood and Bed Fenders Any suggestions on parts house for these that fit the best? Assuming these parts come from the same manufacturer Thanks

11-29-2020, 05:48 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 Hood and Bed Fenders Mar-K for the bed: www.mar-k.com/ LMC sells the hood: https://www.lmctruck.com/chevrolet __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-29-2020, 06:10 PM	#3
rws1012 Registered User Join Date: Apr 2016 Location: Sapulpa Ok. Posts: 71	Re: 66 Hood and Bed Fenders I have 3 hoods in my barn. Too bad you don't live closer to Oklahoma. LOL!! Those are expensive and I bet shipping is pretty high. Good luck.

11-30-2020, 12:10 AM	#5
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 66 Hood and Bed Fenders The salesman I talked to at Auto Metal Direct said he has heard a lot of good reviews about the hood they sell. It's way out of this college student's budget though __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

12-04-2020, 02:04 PM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 Hood and Bed Fenders Call me suspicious but I doubt there are more than one companies actually manufacturing those. Distribution is another thing. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-04-2020, 10:38 PM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 66 Hood and Bed Fenders There is only 1 or 2 factories in China stamping out these replacement parts. Some companies that put their sticker on the parts have better QC standards than others. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-05-2020, 09:30 AM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 Hood and Bed Fenders I recall emailing a company in Taiwan that was considering making the hoods a few years back. For the life of me I cant seem to find the info now. Maybe it was these guys - https://en.chlautoparts.com.tw/news.html __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 12-05-2020 at 09:37 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.