The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-28-2020, 06:34 PM   #1
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 188
Question Speedometer Lubrication?

Anyone know how to lubricate the speedometer bushing? Older Chevy's have a cup plug on the side of the cast housing. Under the plug is a felt wick that holds the oil. My 1971 C20 doesn't seem to have this feature. Is it serviceable?
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs
bry593 is offline   Reply With Quote
Old 04-28-2020, 06:48 PM   #2
toolboxchev
Registered User
 
Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
Re: Speedometer Lubrication?

Hmmm, have not delved into that one yet. I would bet Lock Doc or the T-Bone will be speaking out to ya soon!
toolboxchev is offline   Reply With Quote
Old 04-28-2020, 10:06 PM   #3
KevinK7
Registered User
 
KevinK7's Avatar
 
Join Date: Oct 2017
Location: Hudson Valley, New York
Posts: 609
Re: Speedometer Lubrication?

This doesn't directly answer your question but I like this stuff for lubing cables...
I 'had' an old bottle of stuff called "Kable Ease". I used it on heater control cables, speedo cables, etc. I really like this stuff. The last time I used it, the plastic container cracked and leaked all out
Anyway, I just googled and apparently it's still available...

https://www.amazon.com/Ags-Kable-Eas.../dp/B000ZO0EA2
__________________
'68 C20 Utility 396 4sp (BuildThread: http://67-72chevytrucks.com/vboard/s...d.php?t=806904 )
'68 C10 50th
KevinK7 is offline   Reply With Quote
Old 04-28-2020, 10:39 PM   #4
burnin oil
Registered User
 
Join Date: Jan 2013
Location: Eastern TN
Posts: 1,919
Re: Speedometer Lubrication?

my 4spd ch465 and np205 have splash oiling. Speedo correction box is sealed. For the cable you pull the guts out and shoot some white lithium grease inside it then reinstall the wire.
burnin oil is offline   Reply With Quote
Old 04-29-2020, 07:23 AM   #5
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,761
Re: Speedometer Lubrication?

I disconnect at speedo and squirt graphite cable lube in. You can give a shot of air to help it get lower better faster, then add a bit more. That works for me. A more thorough way to go would be remove, clean, lube, install. PITA, yes, but one and done on this, more than likely second lubing in 50 years
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 04-29-2020, 08:45 AM   #6
mrein3
Registered User
 
mrein3's Avatar
 
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,253
Re: Speedometer Lubrication?

Quote:
Originally Posted by burnin oil View Post
my 4spd ch465 and np205 have splash oiling. Speedo correction box is sealed. For the cable you pull the guts out and shoot some white lithium grease inside it then reinstall the wire.
Quote:
Originally Posted by special-K View Post
I disconnect at speedo and squirt graphite cable lube in. You can give a shot of air to help it get lower better faster, then add a bit more. That works for me. A more thorough way to go would be remove, clean, lube, install. PITA, yes, but one and done on this, more than likely second lubing in 50 years
Just a quick note for us northern latitude guys. DO NOT use white lithium grease on the cable. You will have troubles when it gets cold out (cold in MN is different than cold in Tennessee).

When I worked in the shop and had a customer complaining about a jittery or noisy speedo cable we would pull it from behind the speedometer, clean it, then lube it with a graphite based lube that won't freeze up in the winter.
__________________
'70 cab, '71 chassis, 383, TH350, NP205.
'71 Malibu convertible
'72 Malibu hard top
Center City, MN
mrein3 is offline   Reply With Quote
Old 04-29-2020, 08:54 AM   #7
burnin oil
Registered User
 
Join Date: Jan 2013
Location: Eastern TN
Posts: 1,919
Re: Speedometer Lubrication?

That I a very good point
burnin oil is offline   Reply With Quote
Old 04-29-2020, 01:29 PM   #8
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 188
Re: Speedometer Lubrication?

Quote:
Originally Posted by mrein3 View Post
Just a quick note for us northern latitude guys. DO NOT use white lithium grease on the cable. You will have troubles when it gets cold out (cold in MN is different than cold in Tennessee)
Correct, use graphite or 10w oil.

Unfortunately, you guys took my thread about the speedometer bushing (at the speedometer head) and turned it into how to grease a drive cable.

So, anyone know how to service the speedo head?
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs
bry593 is offline   Reply With Quote
Old 04-29-2020, 01:49 PM   #9
Davidf
Registered User
 
Join Date: Nov 2014
Location: Austin
Posts: 749
Re: Speedometer Lubrication?

Quote:
Originally Posted by KevinK7 View Post
This doesn't directly answer your question but I like this stuff for lubing cables...
I 'had' an old bottle of stuff called "Kable Ease". I used it on heater control cables, speedo cables, etc. I really like this stuff. The last time I used it, the plastic container cracked and leaked all out
Anyway, I just googled and apparently it's still available...

https://www.amazon.com/Ags-Kable-Eas.../dp/B000ZO0EA2
Just ordered the linked snake oil. My speedo cable is not bad, but will lube it anyway. But, I want to try it on my HVAC control cables as they are very stiff as they are on my Datsun 240z as well.
Davidf is offline   Reply With Quote
Old 04-29-2020, 02:34 PM   #10
burnin oil
Registered User
 
Join Date: Jan 2013
Location: Eastern TN
Posts: 1,919
Re: Speedometer Lubrication?

I didn't realize there is a bushing on the speedo head. I have never done anything to them other than screw the cable in or unclip it. Looking forward to learning something here.
burnin oil is offline   Reply With Quote
Old 04-29-2020, 07:19 PM   #11
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
Re: Speedometer Lubrication?

Vaseline Has worked for me for 60 years
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent
nsb29 is offline   Reply With Quote
Old 04-30-2020, 08:46 PM   #12
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 188
Re: Speedometer Lubrication?

Vaseline? I'm asking how to service the speedometer bushing. Wow, just wow....
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs
bry593 is offline   Reply With Quote
Old 04-30-2020, 10:12 PM   #13
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,261
Re: Speedometer Lubrication?

This....
Attached Images
  
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 04-30-2020, 10:26 PM   #14
Rick Bollinger
Registered User
 
Join Date: Mar 2018
Location: Colchester IL
Posts: 281
Re: Speedometer Lubrication?

I have wondered about this myself. I did use some white lithium sparingly on the gears for the odometer. Vasoline is a petroleum product and it does make sense. The bushing on mine was dry as well and I used sewing machine oil 0 weight but it wont last long. I will add some vasoline I need to pull it apart again to add a trans cooler gauge anyway.
Rick Bollinger is offline   Reply With Quote
Old 05-06-2020, 12:28 PM   #15
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 188
Re: Speedometer Lubrication?



https://imgur.com/UyAeoYs

Here is a link to a pic of a 1967 - 1972, C10 / C20 speedometer head (hope the link works, I'm old and still angry about photobucket). How did anyone manage to apply vaseline to the bushing?
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs

Last edited by bry593; 05-06-2020 at 01:11 PM.
bry593 is offline   Reply With Quote
Old 05-07-2020, 10:11 AM   #16
bigmac73
Senior Member
 
bigmac73's Avatar
 
Join Date: Mar 2012
Location: Chesapeake, Va
Posts: 1,275
Re: Speedometer Lubrication?

Bry593 From one Okie to another where are you from?
__________________
Mike
72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider.
421 SBC / TH350 3000RPM Stall
Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks
bigmac73 is offline   Reply With Quote
Old 05-07-2020, 01:39 PM   #17
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 188
Re: Speedometer Lubrication?

Quote:
Originally Posted by bigmac73 View Post
Bry593 From one Okie to another where are you from?
Currently in Broken Arrow, just east of Tulsa.
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs
bry593 is offline   Reply With Quote
Reply

Bookmarks

Tags
cable, lubrication, oil, speedometer

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com