70 blazer for sale in S. CA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wildfirer5 · 01-26-2004, 02:22 AM

1970 Blazer for sale. $2000 firm located in S. CA

Buy it just for the parts

The following parts have not been installed: -I have the receipts

Quality Rebuilt th350 trans with new torque converter $1000
Fresh NP 205 transfer case-- new main input shaft and seals $300+
Hooker ceramic coated headers NIB $318
GM HEI distributer--NIB $200
Power brake booster and master cyinder from BrothersNIB $355
New polyurethane motor and trans mounts
L and R hood hinges NIB $100
New upper and lower radiator hoses Gates
$400 worth of drive shaft work

The following Parts are on vehicle

polyurethane body mounts-- no body lift
polyurethane leafspring bushings
new ball joints, tie rod ends, draglink
front disc brakes installed, fresh calipers

I'm moving on and loosing my ass. Buyer to take all. Please don't ask about purchacing individual parts yet. If interested, I can personally email photos, but it might take a week to do so.

Wildfirer5@sbcglobal.net

BLAZEN70 · 01-27-2004, 12:04 AM

What city are you in?

wildfirer5 · 01-27-2004, 12:15 AM

I'm located about 30 miles nort of L.A. In the city of Santa Clarita near Magic Mountain.

wildfirer5 · 01-27-2004, 03:53 AM

To reply to some of the emails, I'll fill you in on more details.

The worn out shortblock is on the side of my house. Is is a 4 bolt main 350. I remember one of the heads being cracked between an intake and an exhaust valve, but I'm not sure. The heads are the double hump and I think they have 2.02 intake valves. Come take it all for same price. I just figured that the 4 bolt cores are a dime a dozen. I didn't care about the motor since I was going to go for the GM factory 383.

The body is strait and has never been slammed. It has been repainted years ago and has a little bondo and some rust. The amout of rust is nothing compared to the rest of the country. This would be a good foundation or helpful in another project.

The interior is all there and bone stock. It has both front and rear seats which I wasn't planning on using. It does have a double wall top. I will work on posting some pics and can email details to serious inquiries.

If this thing doesn't go as a complete package, I'm going to part it out. It is such a steal, that sombody could take it from me, part it out and still make money.

Please don't try to buy individual parts until I'm fed up with trying to give this thing away.

Thank You

wildfirer5 · 01-31-2004, 06:07 PM

Attached should be some pics. This is a screaming deal just for the parts even if you already own a blazer. I pefer to sell as a complete package. If I decide to part out, I will notify the this message board.

Please email for more pics and info.

wildfirer5 · 01-31-2004, 06:09 PM

Here is another pic

desertchevy · 01-31-2004, 08:32 PM

If you decide to part out I am interested in the headers.Thanks Jeremy

teeitup · 02-06-2004, 08:35 PM

I pm'd you about this!

Blue Beard · 02-07-2004, 12:08 AM

someone should grad that up pretty quick........

Alexis · 02-07-2004, 03:16 AM

do you have photos of the under side? how about rust? I'm very intrested. thanks.

P.s. do you have more photos? you can email me at alexis.m@comcast.net

teeitup · 02-13-2004, 10:54 PM

Alexis, I emailed you! Randy

wildfirer5 · 02-14-2004, 03:55 PM

SOLD

Sorry to all those who live too far away. I basically gave this thing away.

01-26-2004, 02:22 AM	#1
wildfirer5 Registered User Join Date: Jan 2004 Location: CA Posts: 6	70 blazer for sale in S. CA 1970 Blazer for sale. $2000 firm located in S. CA Buy it just for the parts The following parts have not been installed: -I have the receipts Quality Rebuilt th350 trans with new torque converter $1000 Fresh NP 205 transfer case-- new main input shaft and seals $300+ Hooker ceramic coated headers NIB $318 GM HEI distributer--NIB $200 Power brake booster and master cyinder from BrothersNIB $355 New polyurethane motor and trans mounts L and R hood hinges NIB $100 New upper and lower radiator hoses Gates $400 worth of drive shaft work The following Parts are on vehicle polyurethane body mounts-- no body lift polyurethane leafspring bushings new ball joints, tie rod ends, draglink front disc brakes installed, fresh calipers I'm moving on and loosing my ass. Buyer to take all. Please don't ask about purchacing individual parts yet. If interested, I can personally email photos, but it might take a week to do so. Wildfirer5@sbcglobal.net

01-27-2004, 12:04 AM	#2
BLAZEN70 Registered User Join Date: Jan 2004 Location: Beaumont, CA Posts: 6	What city are you in? __________________ 70 Blazer 97 Burb

01-31-2004, 06:07 PM	#5
wildfirer5 Registered User Join Date: Jan 2004 Location: CA Posts: 6	Attached should be some pics. This is a screaming deal just for the parts even if you already own a blazer. I pefer to sell as a complete package. If I decide to part out, I will notify the this message board. Please email for more pics and info. Attached Images

01-31-2004, 06:09 PM	#6
wildfirer5 Registered User Join Date: Jan 2004 Location: CA Posts: 6	Here is another pic Attached Images

01-31-2004, 08:32 PM	#7
desertchevy Registered User Join Date: Dec 2003 Location: Fairbanks Alaska Posts: 222	parts If you decide to part out I am interested in the headers.Thanks Jeremy __________________ 2006 Dodge Quad Cab 4X4 2001 Chevy Impala 2006 Corvette 2009 Fusion 1964 Toyota Landcruiser FJ45 Wagon

01-27-2004, 12:15 AM	#3
wildfirer5 Registered User Join Date: Jan 2004 Location: CA Posts: 6	I'm located about 30 miles nort of L.A. In the city of Santa Clarita near Magic Mountain.

01-27-2004, 03:53 AM	#4
wildfirer5 Registered User Join Date: Jan 2004 Location: CA Posts: 6	To reply to some of the emails, I'll fill you in on more details. The worn out shortblock is on the side of my house. Is is a 4 bolt main 350. I remember one of the heads being cracked between an intake and an exhaust valve, but I'm not sure. The heads are the double hump and I think they have 2.02 intake valves. Come take it all for same price. I just figured that the 4 bolt cores are a dime a dozen. I didn't care about the motor since I was going to go for the GM factory 383. The body is strait and has never been slammed. It has been repainted years ago and has a little bondo and some rust. The amout of rust is nothing compared to the rest of the country. This would be a good foundation or helpful in another project. The interior is all there and bone stock. It has both front and rear seats which I wasn't planning on using. It does have a double wall top. I will work on posting some pics and can email details to serious inquiries. If this thing doesn't go as a complete package, I'm going to part it out. It is such a steal, that sombody could take it from me, part it out and still make money. Please don't try to buy individual parts until I'm fed up with trying to give this thing away. Thank You

02-06-2004, 08:35 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I pm'd you about this! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-07-2004, 12:08 AM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	someone should grad that up pretty quick........ __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-07-2004, 03:16 AM	#10
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	do you have photos of the under side? how about rust? I'm very intrested. thanks. P.s. do you have more photos? you can email me at alexis.m@comcast.net

02-13-2004, 10:54 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Alexis, I emailed you! Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-14-2004, 03:55 PM	#12
wildfirer5 Registered User Join Date: Jan 2004 Location: CA Posts: 6	SOLD Sorry to all those who live too far away. I basically gave this thing away.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.