Factory cold air intake??? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 09-07-2020, 06:31 AM

It looks a little different now , After smoothing the firewall there's plenty of room to mount it on the passenger side .

weq92f · 09-07-2020, 01:52 PM

.
Nice! Was hoping to see an update after the old thread came up. Did you finish it Grumpy or is this the current state?

-klb

**Grumpy old man** · 09-07-2020, 03:27 PM

Quote:

Originally Posted by weq92f

.
Nice! Was hoping to see an update after the old thread came up. Did you finish it Grumpy or is this the current state?

-klb

Ha ! , I wish it was done , Project creep took over awhile back the 292 is going in my other 67 short bed after I found this 350 and had the Muncie rebuilt. Too many project trucks all at the same time , It was a lot easier and faster when I was younger and had help

. When I'm done it should be fun to drive.

**Canuckvetter** · 09-10-2020, 12:10 AM

I just missed one for sale here in Alberta on the weekend. Someone got it!

https://67-72chevytrucks.com/vboard/...1&d=1599710904

**hevy_chevy67** · 09-14-2020, 12:35 PM

Quote:

Originally Posted by Canuckvetter

I just missed one for sale here in Alberta on the weekend. Someone got it!

https://67-72chevytrucks.com/vboard/...1&d=1599710904

Yep, it went to a member on here. Only wish it was more complete from the truck I got it from. Amazing the air cleaner was even still there though, as no motor was with the truck but the air cleaner was sitting in the cab on the floor.

chewychevy67 · 09-14-2020, 07:22 PM

I am pretty excited to have it! I also found more pieces on ebay. Now I'm just missing the bracket which I have dimensions and can here make easily to look stock and the hose from the air cleaner to the pre cleaner. I'll bet that hose is impossible to find alone or at all.

**Steeveedee** · 09-14-2020, 08:27 PM

I'd bet money that the auto parts store(s) have the right diameter, though the ends would still have the wire in them, if it's bulk hose. Maybe that would still work, since it doesn't need an airtight seal?

**MJN** · 09-17-2020, 12:38 PM

Stumbled across this article on Jim Carter's website today
http://oldchevytrucks.com/blog/index...al-air-filter/

**Canuckvetter** · 09-17-2020, 10:26 PM

Quote:

Originally Posted by chewychevy67

I am pretty excited to have it! I also found more pieces on ebay. Now I'm just missing the bracket which I have dimensions and can here make easily to look stock and the hose from the air cleaner to the pre cleaner. I'll bet that hose is impossible to find alone or at all.

So glad you got it. I had you in mind when I saw it. Try the Corvette supply places for the hose. The early corvettes had that type of hose for the fuelies I believe.

**Canuckvetter** · 09-17-2020, 10:29 PM

Quote:

Originally Posted by hevy_chevy67

Yep, it went to a member on here. Only wish it was more complete from the truck I got it from. Amazing the air cleaner was even still there though, as no motor was with the truck but the air cleaner was sitting in the cab on the floor.

chewychevy67 · 09-18-2020, 12:27 AM

Quote:

Originally Posted by Canuckvetter

So glad you got it. I had you in mind when I saw it. Try the Corvette supply places for the hose. The early corvettes had that type of hose for the fuelies I believe.

I'll have to check that out. Thanks

**Canuckvetter** · 09-21-2020, 06:16 PM

Quote:

Originally Posted by chewychevy67

I'll have to check that out. Thanks

https://www.corvettecentral.com/c1-5...f%3fcount%3d45

09-07-2020, 06:31 AM	#51
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Factory cold air intake??? It looks a little different now , After smoothing the firewall there's plenty of room to mount it on the passenger side . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

09-07-2020, 01:52 PM	#52
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 2,873	Re: Factory cold air intake??? . Nice! Was hoping to see an update after the old thread came up. Did you finish it Grumpy or is this the current state? -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

09-10-2020, 12:10 AM	#54
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,041	Re: Factory cold air intake??? I just missed one for sale here in Alberta on the weekend. Someone got it! https://67-72chevytrucks.com/vboard/...1&d=1599710904 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

09-14-2020, 07:22 PM	#56
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,411	Re: Factory cold air intake??? I am pretty excited to have it! I also found more pieces on ebay. Now I'm just missing the bracket which I have dimensions and can here make easily to look stock and the hose from the air cleaner to the pre cleaner. I'll bet that hose is impossible to find alone or at all. Attached Images

09-14-2020, 08:27 PM	#57
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,087	Re: Factory cold air intake??? I'd bet money that the auto parts store(s) have the right diameter, though the ends would still have the wire in them, if it's bulk hose. Maybe that would still work, since it doesn't need an airtight seal? __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

09-17-2020, 12:38 PM	#58
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,962	Re: Factory cold air intake??? Stumbled across this article on Jim Carter's website today http://oldchevytrucks.com/blog/index...al-air-filter/ __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.