68 GMC 4x4 Suburban build up

[vectorit]

I don't know the gear ratio, but I could pull the cover off and figure out.

I am in the Temecula area just off Winchester Rd on I-15.

[68SWB4x4]

Originally Posted by vectorit

I don't know the gear ratio, but I could pull the cover off and figure out.

I am in the Temecula area just off Winchester Rd on I-15.

Sent you a PM

Thanks!

[68SWB4x4]

Been trying to make some progress.

I got a P/S Pump & bracket from board member 68bowtie thanks a ton!

Went to mount it up and of course with this truck... The holes in the 327 were not fully drilled & tapped so I had to do that as well.

I also found some 35x12x16.5 BFG Rollers on craigslist for $100 bucks I Just picked them up and will mount them on my Slot Mags tomorrow and polish them up

Funny is the guy I picked them up from recognized me (went to school with my wife)

I can't go anywhere...

[vectorit]

Are you trying to get the burb running on the OE drive train?

[68SWB4x4]

Originally Posted by vectorit

Are you trying to get the burb running on the OE drive train?

Yea for the time being. At least to be able to move it from the field to the driveway lol

[vectorit]

I think that's a good idea.
I've learned when on a tight budget, to leave things running and mobile until I am ready to do a full swap. Keeps you from getting the feeling of being overwhelmed, especially when stuff sits all apart and in the way.

[Number98]

Originally Posted by vectorit

I think that's a good idea.
I've learned when on a tight budget, to leave things running and mobile until I am ready to do a full swap. Keeps you from getting the feeling of being overwhelmed, especially when stuff sits all apart and in the way.

I agree 100%, you couldn't be more right!

[68SWB4x4]

Originally Posted by vectorit

I think that's a good idea.
I've learned when on a tight budget, to leave things running and mobile until I am ready to do a full swap. Keeps you from getting the feeling of being overwhelmed, especially when stuff sits all apart and in the way.

Yup That is why I am working that way

PLENTY of things that need to be done first anyway

Like picking up that 14bolt from you

[68SWB4x4]

Anyone have pictures of the clutch setup? How the Z bar and rod hooks up? Clearly something is off with mine and I can't figure it out... (sm465)

Also Inline said they will refund the parts but with the shipping both ways I am still out a decent amount of $. They said the problem is "Because mine is a GMC it has leaf springs and not coil" I then argued the point all 4x4s were leaf spring...

[vectorit]

This good enough?

[68SWB4x4]

Originally Posted by vectorit

This good enough?

That is helpful also if you could get how the rod goes from the z bar to the tranny. No rush at all.

[vectorit]

That was a pic I had handy on my phone, so I will get you what you want tomorrow morning.