63-87 rack and pinion

[robnolimit]

Aggie, I'll have some picts up in a bit. With the raised crossmember, you will need a different type bearing support. I can help you with that.

[aggie91]

Originally Posted by robnolimit

Aggie, I'll have some picts up in a bit. With the raised crossmember, you will need a different type bearing support. I can help you with that.

That would be great. I think this is the last piece I need before the frame comes apart for blasting and paint....

Thanks,

[aggie91]

Originally Posted by robnolimit

Aggie, I'll have some picts up in a bit. With the raised crossmember, you will need a different type bearing support. I can help you with that.

Rob, did you ever get the pictures of the support bearing for the 73-87 frame set ujp? I will send you a PM also. So far the install went well and looks good. There are some pictures in Korbin's build thread in my sig below. I just need the above issue solved and the support bearing and we can move onto getting the rest of the truck together.

Thanks for a great product. I am looking forward driving this set up with PB Forward Arms.

[aggie91]

Thought I would post up some pic's of my install on Korbin's '82 C-10. We raised the crossmember up into the frame 1.5" and also used Porterbuilt's new Forward Arms (Lowers only at this point). Here are some pictures from this past weekend:



I still need to do the support bearing, but I am waiting on Rob to post up some pictures of the correct set up for a '73-'87 frame rail. I have a PS pump, hoses, and cooler from a 2000 GMC that we are going to use in the final installation. Enjoy!