1968 Inline 250 Front Motor Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68gmcdude · 08-28-2022, 06:31 PM

Where is the best place to buy replacement front motor mounts for a 1968 inline 250 motor? Mine are shot. Thanks!

bill3rail · 08-28-2022, 08:09 PM

Where have you looked so far?

GMC Pauls?
Rock Auto?
Local Auto Parts?

If none of the above, check them out.

68gmcdude · 08-28-2022, 08:29 PM

Quote:

Originally Posted by bill3rail

Where have you looked so far?

GMC Pauls?
Rock Auto?
Local Auto Parts?

If none of the above, check them out.

I've checked Rock Auto and local parts stores. Seems like everyone has these. They don't look like the originals but it says they fit. I guess my concern is the holes lining up if they don't look like the originals.

jumpsoffrock · 08-28-2022, 09:10 PM

I found that local parts stores offered parts with lifetime warranties and rockauto didn't, so I went local.

Call around and see.

**67 twins** · 08-28-2022, 09:53 PM

Quote:

Originally Posted by 68gmcdude

I've checked Rock Auto and local parts stores. Seems like everyone has these. They don't look like the originals but it says they fit. I guess my concern is the holes lining up if they don't look like the originals.

Those are the correct mounts. Also they look the same as what's on the truck, I don't see why you think they won't work

68gmcdude · 08-28-2022, 10:13 PM

Quote:

Originally Posted by 67 twins

Those are the correct mounts. Also they look the same as what's on the truck, I don't see why you think they won't work

Maybe they just look different to me because the rubber is separated. Thanks.

**'68OrangeSunshine** · 08-28-2022, 10:23 PM

The OEM motor mounts could separate at the rubber block and tear apart. Replacing motor mounts with a later model upgrade prevents separation, as the steel hooks around and locks into the other side.

plantman · 08-30-2022, 08:26 AM

@68gmc.I used the ones from rock auto on my 68.Same as your pic.Rhey worked fine.

08-28-2022, 06:31 PM	#1
68gmcdude Registered User Join Date: Jun 2017 Location: Mentor, OH Posts: 126	1968 Inline 250 Front Motor Mounts Where is the best place to buy replacement front motor mounts for a 1968 inline 250 motor? Mine are shot. Thanks! Attached Images

08-28-2022, 08:09 PM	#2
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: 1968 Inline 250 Front Motor Mounts Where have you looked so far? GMC Pauls? Rock Auto? Local Auto Parts? If none of the above, check them out. __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

08-28-2022, 09:10 PM	#4
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 924	Re: 1968 Inline 250 Front Motor Mounts I found that local parts stores offered parts with lifetime warranties and rockauto didn't, so I went local. Call around and see.

08-28-2022, 10:23 PM	#7
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,064	Re: 1968 Inline 250 Front Motor Mounts The OEM motor mounts could separate at the rubber block and tear apart. Replacing motor mounts with a later model upgrade prevents separation, as the steel hooks around and locks into the other side. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 08-28-2022 at 10:29 PM.

08-30-2022, 08:26 AM	#8
plantman Registered User Join Date: Jul 2015 Location: Gouverneur NY Posts: 28	Re: 1968 Inline 250 Front Motor Mounts @68gmc.I used the ones from rock auto on my 68.Same as your pic.Rhey worked fine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.