Back From The Powder Coater - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72ChevyCheyenne · 10-25-2002, 11:31 PM

What do ya think?

72ChevyCheyenne · 10-25-2002, 11:32 PM

Here is another one.

flyin99 · 10-25-2002, 11:36 PM

Gotta love that powder!!!!!!!! looks good

roger0080 · 10-25-2002, 11:53 PM

Fantastic! I don't know why but a fresh wet paint job or powder coating gets my mouth watering! Yummy!

70c10 · 10-26-2002, 12:01 AM

I'll tell ya what I think!, I think I'm jealous!!!!

firstgencamaros · 10-26-2002, 01:08 AM

That has to be one of the most beautiful things I have ever seen...... Looks awesome!
Later,

DanoDMano · 10-26-2002, 01:42 AM

Man that looks good....
Some Disassembly Required !!

jay-dawg · 10-26-2002, 04:44 AM

Looks great!!! I can't tell in the first pic but is that dust on the inside of the frame or did they miss that part with the powdercoat. The second one looks like dust on it.

I'm jealous

jay

72ChevyCheyenne · 10-26-2002, 06:13 AM

It is dust mixed with some rain. When I went to pick everything up it was coated in dust. Then it rained on the way home. I couldn't wait to take the pictures so I hadn't wiped it down yet.

basketcase · 10-26-2002, 11:09 AM

BEAUTIFUL!!!!

I'm green with envy.

Tom

chevy garage · 10-26-2002, 07:42 PM

That looks great!!!!

10-25-2002, 11:31 PM	#1
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	Back From The Powder Coater What do ya think? Attached Images __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

10-25-2002, 11:32 PM	#2
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	Here is another one. Attached Images __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

10-25-2002, 11:53 PM	#4
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	Fantastic! I don't know why but a fresh wet paint job or powder coating gets my mouth watering! Yummy! __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

10-26-2002, 12:01 AM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I'll tell ya what I think!, I think I'm jealous!!!! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-26-2002, 01:08 AM	#6
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	That has to be one of the most beautiful things I have ever seen...... Looks awesome! Later, __________________ FGC

10-25-2002, 11:36 PM	#3
flyin99 creator of kong Join Date: Mar 2001 Location: Kentucky Posts: 538	Gotta love that powder!!!!!!!! looks good

10-26-2002, 01:42 AM	#7
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Powder Man that looks good.... Some Disassembly Required !! __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

10-26-2002, 04:44 AM	#8
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Looks great!!! I can't tell in the first pic but is that dust on the inside of the frame or did they miss that part with the powdercoat. The second one looks like dust on it. I'm jealous jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

10-26-2002, 06:13 AM	#9
72ChevyCheyenne Registered User Join Date: May 2002 Location: Woodstock, GA USA Posts: 300	It is dust mixed with some rain. When I went to pick everything up it was coated in dust. Then it rained on the way home. I couldn't wait to take the pictures so I hadn't wiped it down yet. __________________ Bill Durham http://home.attbi.com/~bulldurham 72 Cheyenne Restoration in progress Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.

10-26-2002, 11:09 AM	#10
basketcase Registered User Join Date: Oct 2001 Location: Edgerton OH USA Posts: 627	BEAUTIFUL!!!! I'm green with envy. Tom __________________ '69 swb stepside in progress. '59 Corvette lifetime project

10-26-2002, 07:42 PM	#11
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	That looks great!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.