DBW pedal mounting bracket - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 12-31-2014, 11:18 AM

Quote:

Originally Posted by lchall

Still have these for sale?

Thanks - Chad

Chad, I have both pedal brackets available. Which one do you need, the one for the Corvette pedal (Gen IV) or the one for the truck/SUV pedal (GEN III)? Let me know.

lchall · 12-31-2014, 11:20 AM

I need the one for the Corvette pedal.

Thanks - Chad

**Hart_Rod** · 12-31-2014, 11:43 AM

Quote:

Originally Posted by lchall

I need the one for the Corvette pedal.

Thanks - Chad

PM sent.

Houston Ben · 02-16-2015, 09:46 AM

I am!

**derotoreut** · 02-18-2015, 01:05 AM

Rob, I'm not sure what pedal I want to use yet for my LS3 swap. I'm considering using the Corvette pedal for my 71 because of the similarities with the stock pedal. I'm also considering Lokar pedals, but big $$$$. Will your mounting bracket work with any of the Lokar DBW pedals? If so, do you know which ones?

**Hart_Rod** · 02-18-2015, 09:16 AM

Quote:

Originally Posted by derotoreut

Rob, I'm not sure what pedal I want to use yet for my LS3 swap. I'm considering using the Corvette pedal for my 71 because of the similarities with the stock pedal. I'm also considering Lokar pedals, but big $$$$. Will your mounting bracket work with any of the Lokar DBW pedals? If so, do you know which ones?

Dan - I think the LOKAR pedal mounts very close to the way the Corvette pedal does, but I haven't ever used one. If it were me, I would just go with the corvette pedal. You will save yourself about $500.... Let me know.

Rob

**derotoreut** · 02-18-2015, 10:52 PM

Quote:

Originally Posted by Hart_Rod

Dan - I think the LOKAR pedal mounts very close to the way the Corvette pedal does, but I haven't ever used one. If it were me, I would just go with the corvette pedal. You will save yourself about $500.... Let me know.

Rob

OK Rob, you convinced me. I think I'll take your DBW bracket for my 71 LS3 swap. My pedals should match up pretty well with the 05+ Corvette pedal. Can you PM me payment details. I will reply with my contact info and ship address. Thanks.

**Hart_Rod** · 02-19-2015, 09:16 AM

Quote:

Originally Posted by derotoreut

OK Rob, you convinced me. I think I'll take your DBW bracket for my 71 LS3 swap. My pedals should match up pretty well with the 05+ Corvette pedal. Can you PM me payment details. I will reply with my contact info and ship address. Thanks.

PM sent.

Houston Ben · 02-21-2015, 03:51 PM

Come on all, I can't be the only square guy that wants one!!!

**derotoreut** · 02-28-2015, 03:26 PM

Rob,
I received the Gen IV throttle bracket. It's a nice idea, but I was disappointed that the holes didn't line up. Hopefully this is a once only situation.

Here is my 71 throttle pedal compared to the Gen IV pedal.
Name: Gen IV LS Throttle Bracket - 1.jpg
Views: 3663
Size: 105.1 KB

Name: Gen IV LS Throttle Bracket - 1.jpg
Views: 3663
Size: 105.1 KB

You can see when the original pedal bracket is placed on top of the new one, it doesn't line up. Bottom hole in line… Top ones don't match
Name: Gen IV LS Throttle Bracket - 2.jpg
Views: 2642
Size: 58.2 KB

Name: Gen IV LS Throttle Bracket - 2.jpg
Views: 2642
Size: 58.2 KB

The holes would have to be re-drilled or re-worked some how. Top left hole in line… Others don't line up.
Name: Gen IV LS Throttle Bracket - 3.jpg
Views: 2193
Size: 51.0 KB

Name: Gen IV LS Throttle Bracket - 3.jpg
Views: 2193
Size: 51.0 KB

Top right hole in line… Others don't line up.
Name: Gen IV LS Throttle Bracket - 4.jpg
Views: 2502
Size: 55.7 KB

CJM72 · 12-29-2018, 07:04 PM

Quote:

Originally Posted by derotoreut

Rob,
I received the Gen IV throttle bracket. It's a nice idea, but I was disappointed that the holes didn't line up. Hopefully this is a once only situation.

Here is my 71 throttle pedal compared to the Gen IV pedal.
Attachment 1370458

You can see when the original pedal bracket is placed on top of the new one, it doesn't line up. Bottom hole in line… Top ones don't match
Attachment 1370459

The holes would have to be re-drilled or re-worked some how. Top left hole in line… Others don't line up.
Attachment 1370460

Top right hole in line… Others don't line up.
Attachment 1370461

I had the same issue. Triangle pattern on my 72 Blazer was not equilateral and the Escalade pedal doesn't match the truck shape either.

**Hart_Rod** · 12-30-2018, 10:14 AM

Quote:

Originally Posted by dec010974

hello hart_rod. have you made any progress for the squarybody crowd? this is what I have.

Quote:

Originally Posted by Coursey

Anything for 76 Blazer?

Several people have used the bracket for there square body, it just depends on which pedal you are using.

Quote:

Originally Posted by CJM72

I had the same issue. Triangle pattern on my 72 Blazer was not equilateral and the Escalade pedal doesn't match the truck shape either.

All brackets are drilled for both bolt patterns (67-70/71-72) now, so there should be an issue with it bolting up. Thanks for posting.

**Utahboy** · 01-31-2019, 10:41 AM

Just sent you a Payment for one Bracket.
Thanks - Tate

**Hart_Rod** · 01-31-2019, 08:57 PM

Quote:

Originally Posted by Utahboy

Just sent you a Payment for one Bracket.
Thanks - Tate

Will ship tomorrow. Thanks!

**Hart_Rod** · 02-28-2015, 05:59 PM

That's strange Dan. I've sold almost 40 of these and haven't had any problems with the holes not lining up. The dimensions of your pedal are the same as 73-87 pedals. Here's some pictures of my 86. If you don't think it will work for you, please return it and I will refund your money.

**derotoreut** · 02-28-2015, 10:05 PM

Quote:

Originally Posted by Hart_Rod

That's strange Dan. I've sold almost 40 of these and haven't had any problems with the holes not lining up. The dimensions of your pedal are the same as 73-87 pedals. Here's some pictures of my 86. If you don't think it will work for you, please return it and I will refund your money.

Rob - That is strange. My truck is an original 71 swb built in California and spent its life in Arizona. Did the 71 & 72 year trucks have nuts welded on the outside of the firewall, in order to bolt the original throttle bracket assembly to, from inside the cab? Mine is set up like that. This is my first 71, so I am not familiar with it. I have a 69 & 70 to, but their pedal assemblies were different. I'm just wondering because the only thing I could think of is unless someone changed it. It doesn't appear to be the case because when I took it all apart, everything appeared to be original.

I appreciate your consideration in allowing me to return the bracket. I will let you know if I'm able to use it or not. I want to smooth my firewall anyway, so I would be looking for a different way to attach the bracket. Thanks.

**Hart_Rod** · 02-28-2015, 11:05 PM

Quote:

Originally Posted by derotoreut

Rob - That is strange. My truck is an original 71 swb built in California and spent its life in Arizona. Did the 71 & 72 year trucks have nuts welded on the outside of the firewall, in order to bolt the original throttle bracket assembly to, from inside the cab? Mine is set up like that. This is my first 71, so I am not familiar with it. I have a 69 & 70 to, but their pedal assemblies were different. I'm just wondering because the only thing I could think of is unless someone changed it. It doesn't appear to be the case because when I took it all apart, everything appeared to be original.

I appreciate your consideration in allowing me to return the bracket. I will let you know if I'm able to use it or not. I want to smooth my firewall anyway, so I would be looking for a different way to attach the bracket. Thanks.

That's really crazy Dan. As far as I know, all of the years of trucks, 67-72, had the nutserts welded in that pattern on the outside of the firewall. I've had people with all of those years use this bracket, so I'm at a loss. If your truck was a 72, I would say maybe they ran out of 72 brackets and started using the 73's

. Who knows. Just let me know what you want to do, and my apologies for the aggravation.

TKulak · 03-01-2015, 11:03 AM

I have an 01 5.3 motor from a Yukon. Can I use the Corvette pedal if I repin it as shown in earlier post? Thank you

**Hart_Rod** · 03-01-2015, 11:48 AM

Quote:

Originally Posted by TKulak

I have an 01 5.3 motor from a Yukon. Can I use the Corvette pedal if I repin it as shown in earlier post? Thank you

I don't think you can convert the 01 to a Corvette pedal. Did you see my adapter brackets for the truck/SUV pedal here:

http://67-72chevytrucks.com/vboard/s...d.php?t=651123

Houston Ben · 03-03-2015, 03:15 PM

Hi Rob,
Any update on the 86'

**roushinator** · 03-03-2015, 05:26 PM

I got mine. Thanks Rob!

Ikarus · 03-29-2015, 10:42 PM

Rob, I'll take one as long as it fits the 73-87. I've got a Corvette pedal ready to install.

Thanks,

Chris

**Hart_Rod** · 03-30-2015, 08:37 AM

Quote:

Originally Posted by Houston Ben

Hi Rob,
Any update on the 86'

Not yet....

Quote:

Originally Posted by roushinator

I got mine. Thanks Rob!

Thanks!

Quote:

Originally Posted by Ikarus

Rob, I'll take one as long as it fits the 73-87. I've got a Corvette pedal ready to install.

Thanks,

Chris

Chris, unfortunately I haven't had time to mess with the 73-87 pedals yet. Plus, I haven't had a lot interest in those specific ones. I'll let you know if something changes.

travlinman · 05-06-2015, 09:40 AM

I would be interested in 1 for my 91 r30 crew cab (still 73-87 cab) with a 04 suburban 5.3

jessemthompson · 06-12-2015, 11:28 AM

Purchased this from Hartrod. I got it installed with my Vette pedal today. The fittment is perfect. Thanks for putting a good product out there Hartrod. This was one less hassle to deal with during my ongoing swap.

12-31-2014, 11:20 AM	#2
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: DBW pedal mounting bracket I need the one for the Corvette pedal. Thanks - Chad __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

02-16-2015, 09:46 AM	#4
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: DBW pedal mounting bracket I am!

02-18-2015, 01:05 AM	#5
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: DBW pedal mounting bracket Rob, I'm not sure what pedal I want to use yet for my LS3 swap. I'm considering using the Corvette pedal for my 71 because of the similarities with the stock pedal. I'm also considering Lokar pedals, but big $$$$. Will your mounting bracket work with any of the Lokar DBW pedals? If so, do you know which ones? __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

02-21-2015, 03:51 PM	#9
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: DBW pedal mounting bracket Come on all, I can't be the only square guy that wants one!!!

02-28-2015, 03:26 PM	#10
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: DBW pedal mounting bracket Rob, I received the Gen IV throttle bracket. It's a nice idea, but I was disappointed that the holes didn't line up. Hopefully this is a once only situation. Here is my 71 throttle pedal compared to the Gen IV pedal. You can see when the original pedal bracket is placed on top of the new one, it doesn't line up. Bottom hole in line… Top ones don't match The holes would have to be re-drilled or re-worked some how. Top left hole in line… Others don't line up. Top right hole in line… Others don't line up. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

01-31-2019, 10:41 AM	#13
Utahboy Senior Member Join Date: May 2014 Location: Linden, Michigan Posts: 418	Re: DBW pedal mounting bracket Just sent you a Payment for one Bracket. Thanks - Tate

02-28-2015, 05:59 PM	#15
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,832	Re: DBW pedal mounting bracket That's strange Dan. I've sold almost 40 of these and haven't had any problems with the holes not lining up. The dimensions of your pedal are the same as 73-87 pedals. Here's some pictures of my 86. If you don't think it will work for you, please return it and I will refund your money. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-01-2015, 11:03 AM	#18
TKulak Registered User Join Date: Nov 2014 Location: Perry, OK Posts: 21	Re: DBW pedal mounting bracket I have an 01 5.3 motor from a Yukon. Can I use the Corvette pedal if I repin it as shown in earlier post? Thank you

03-03-2015, 03:15 PM	#20
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: DBW pedal mounting bracket Hi Rob, Any update on the 86'

03-03-2015, 05:26 PM	#21
roushinator Senior Member Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: DBW pedal mounting bracket I got mine. Thanks Rob! __________________ Ryan... 1972 C10 Stepside With 2014 Camaro 6.2L/6l80e drivetrain http://67-72chevytrucks.com/vboard/s...11#post5532411

03-29-2015, 10:42 PM	#22
Ikarus Registered User Join Date: Jan 2015 Location: Athens, GA Posts: 1	Re: DBW pedal mounting bracket Rob, I'll take one as long as it fits the 73-87. I've got a Corvette pedal ready to install. Thanks, Chris

05-06-2015, 09:40 AM	#24
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: DBW pedal mounting bracket I would be interested in 1 for my 91 r30 crew cab (still 73-87 cab) with a 04 suburban 5.3 __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

06-12-2015, 11:28 AM	#25
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 956	Re: DBW pedal mounting bracket Purchased this from Hartrod. I got it installed with my Vette pedal today. The fittment is perfect. Thanks for putting a good product out there Hartrod. This was one less hassle to deal with during my ongoing swap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.