NC Parting a complete 1971 Blazer 4x4

[jeffg1010]

AVAILABLE PARTS LIST -UPDATED: 02/11/12-
There is a lot of photos spread throughout this thread, I added more photos below, but I have over 200 photos in a photobucket album at this link: http://s213.photobucket.com/albums/c...arts%20Blazer/

There is A LOT of good parts on this Blazer and I have tried to document all of them. (including a lot of good patch pieces ranging from floor pans, to rear floor and even a few body pieces. Not to mention a complete windshield/firewall/windshield/dash and partial floor pan that is in good shape with only minor rust. The truck is now torn down to bare frame and everything is ready to buy. Let me know what you are looking for

Complete K5 Blazer, quarters and rockers are shot. Floor pans are decent except around the doors, Good frame from what I have seen. Original 307 engine with 3 speed on the column, 56,000 original miles from what I have been told. Runs and 4wd works, so transfer case should be good. Nice uncut dash, Windshield has a little fog around the edges but windshield frame is in good shape. But there is a lot of good parts and patches on this truck. let me know quick what you need. Good double wall top, minus the hatch.

The truck is located in WV, but I will bring any part you want back to NC if you are interested and live in the Charlotte area. I can also keep parts stored until Auto Fair or Good Guys in the Spring if you pay now.

Liftgate, sunvisors and rear seat are already spoken for.

Update: Rough price list is below, I have no clue how to price this stuff, so feel free to give me feedback. Many of the prices were taken from other threads, so I know I am close.

ALSO... now parting out the chassis!

1. Under Dash Speaker: $40.00 - SOLD
2. Painted Bumpers: $100.00 for both or $50.00 each - SOLD
3. Complete Doors w/ wing glass: $100 for the pair w/out inner door panels, $130 with panels-SOLD
5. Crossmembers-
6. 6 lug rally wheels: $75.00/set
7. Hubs: -
8. Upper radiator tube with end hoses: $20.00 - SOLD
9. Front and Rear Carpet hold downs: $20.00/ pair-SOLD
10. Inside Door panels: $40.00 / pair-SOLD
11. E-Brake Cables:
12. Front Seat Belts: $40.00 / pair-SOLD

12. Front Seats -SOLD
13. Front Seat Brackets/Tracks: $85.00 -SOLD
14. Proportioning Valve “L” Bracket $15.00 - SOLD
15. Transfer Case shifter $40.00-SOLD
16. Blazer Emblems: $20.00 pair-SOLD
17. Windshield Frame: $100.00-SOLD

19. Rolling chassis: $150.00

21. Front Clip Complete: $300.00-SOLD
22. 3 speed tranny: $100.00
23. Transfer Case: $100.00 -SOLD-Pending Payment

29. Taillights: $20.00 pair

32. Rear seat bolt down plates: $30.00
33. Fuel filler neck: 45.00
34. Front drive shaft: $40.00
35. Rear drive shaft: $40.00
36. Firewall: $150.00
37. Double Wall Top- minus hatch $200.00

39. Complete 307 SBC: Runs $250.00
40. Factory AM Radio: $30.00- SOLD
41. Non A/C Dash with un-cut radio hole $90.00
42. Complete Instrument Cluster: $40.00-SOLD
43. Ashtray $20.00
44. Glove Compartment Door: $40.00-SOLD-pending payment
45. Backup lights: $10.00
46. Rear Bumper brackets: $25.00-SOLD
47. Front Bumper brackets: $25.00-SOLD
48. Radiator: $40.00-SOLD
49. Radiator Shroud: $30.00-SOLD PENDING PAYMENT

51. Marker lights: $15.00 for all four

53. Heater box with hoses: $40.00
54. Non-tilt 3 speed column: $50.00
55. Rear view mirror: $10.00
56. Rear top hold down brackets: $25.00-SOLD
57. Clutch pedal assembly: $20.00
58. Brake pedal assembly : $25.00
59. Gas pedal assembly: $15.00
60. Transmission "High" Hump: $40.00-SOLD
60. Gas tank - SOLD-pending payment

















both sides available




[IMG]
[/IMG]

[47thriftmaster]

Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

[jeffg1010]

Originally Posted by 47thriftmaster

Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

The bottom of the doors need a little work, but overall, they are in decent shape. Probably not for $200 though. Maybe $100 for both of them.

[47thriftmaster]

May also be interested in the doors, pending pics of the ruff areas and price. I'll take all I mentioned pending pricing and pics

[teeitup]

Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

[rockc]

I would be interested in front and rear carpet hold downs.

[CORSAIR]

Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred

[WETOWM]

Put me 2nd in line for the upper radiator hoses & tube

[jeffg1010]

Originally Posted by teeitup

Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

[gmclonghorn]

Put me down 2nd for the carpet strips. Thanks
Posted via Mobile Device

[rsavage]

I'll be 2nd in line for the underdash radio speaker/brackets if it is an original one. Thanks, Rick.

[72GMCK-2500]

Does the E-Brake still work? How are the cables? Im interested!

[blazin71K5]

If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks

[LUCKTRUCK]

How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.

[too much stuff]

T case knob and blazer emblems?

[Gary 70 Jimmy]

put me in line for the speaker under the dash

[68panelman]

Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike

[Gary 70 Jimmy]

Originally Posted by Gary 70 Jimmy

put me in line for the speaker under the dash

Did the speaker sell yet if not I will take it.

[blazin71K5]

Originally Posted by 70BLAZERX2

I was 1st in line asking on the seat tracks

look at my post on the first page in my post above yours I had alredy asked about them, therefore I believe I was first in line.

[jeffg1010]

Originally Posted by 70BLAZERX2

well you can get them...thats too much for them anyway

Aw, come on man... don't be bashing my prices. Especially right in my thread. It's not cool and it's against policy.

I've never parted a truck, and I had no clue where to start pricing this stuff, so I spent two hours weeding through the WIW thread and the Blazer/Suburban thread to see what other members were offering these parts for.

Thanks for your interest, but if you think I am WAY off base on a price, talk to me about it. I am not doing this to get rich, I just want it out of the way.

[rockc]

I will take carpet strip hold downs pending pic's and condition.

[jeffg1010]

Originally Posted by LUCKTRUCK

$20. sounds good for the prop. valve bracket.

I'll take it. Please send me your payment info.

I will hold off until I get it off before I start taking payments. Just want to make sure there is no issue. I will let you know next week.

Originally Posted by botmfedr1

Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs.

shipping to 79908. please send me pics via text if possible (253-495-0880)

thanks,
Mondo

No problem, I'll get a pic for you

Originally Posted by 72blazr

Interested in the bolt down plates #32 pending pic. Are those prices shipped??

I'll get you a pic

Originally Posted by c1069

its a 4 core radiator? Or?

I will have to check for you

Originally Posted by blazin71K5

P.M. Sent about shipping quote for seat belts, sunvisors, and seat tracks.

Yep, got it. They are yours if you want them. I will get you pics next week, once you see what you want, let me know and I will get you a shipping quote. The sunvisors and mounts I am keeping for my BLazer as they are missing. I forgot to put that in the description.

Originally Posted by rockc

I will take carpet strip hold downs pending pic's and condition.

This is one part I am not sure of at all. If they are there, I will take a look at their condition and post pics

[gcburdic]

Originally Posted by 70BLAZERX2

thats too much for them anyway

Buyers Code of Conduct 67-72chevytrucks.com

VI.If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated.

As OP stated, it's against forum policy to make this comment....please move on and keep you comments to yourself if you don't like the pricing

[LUCKTRUCK]

no rush on the prop. valve bracket. Just let me now when you're ready for payment. Thanks!

[BBrendal]

Originally Posted by gcburdic

Buyers Code of Conduct 67-72chevytrucks.com

VI.If you do not like the price of an item, look further. Comments on value, condition etc will not be tolerated.

As OP stated, it's against forum policy to make this comment....please move on and keep you comments to yourself if you don't like the pricing

Please correct me if Im wrong but is 70blazerx2 forum staff? If so shouldnt he know this?