And so, it begins....the rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 02-10-2006, 01:43 PM

I will be starting on my truck next weekend. Plans are as follows:
Shorten frame, shorten bed, install rear fuel cell, lower front and rear, install air, tilt and cruise. (Yes, I have all three ready to go in)

, nice allum wheels (unknow design just yet), AM/FM CD with subs and components, figerglass kick panels, custom door panels. Recover seat to match grey and black interior, behind the light fuel fill. Sport front and rear chrome bumpers.
Truck will be black on top to body line, then silver from there down. Swapping the front clip for 67-68 clip. I already have the PS and Power disk installed.
Motor:
355, 9.5.1, 2.02 double hump heads (worked). Shooting for 300 hp minimum. TH400 trans that I will build myself, dual exhaust dumped at the axle with 40 series Flowmasters.
First step is to install my new rockers. Then the shortening begins. I have everything except, the wheels, tires and bumpers. Just have to do the labor now.
Parts will be up for sell as they are replaced.
clip for sale http://67-72chevytrucks.com/vboard/s...d.php?t=188942

fade94 · 02-10-2006, 01:44 PM

More before pics.

5150 · 02-10-2006, 01:51 PM

It sounds so simple right now like you'll have it done in two weekends.

Good luck!

Joe67 · 02-10-2006, 01:53 PM

Good Luck!
Is that a longhorn??

fade94 · 02-10-2006, 01:54 PM

no kidding. I've been steadily gathering parts for it via purchase, trade and barter. Now that my son't truck is done until he gets some cash of his own, I can start on mine. The only major part of the whole thing is the shortening of the frame and bed.

fade94 · 02-10-2006, 01:55 PM

When I first got it, I thought it might be a longhorn. But, I measured the bed and it's only 8' so I don't think so.

MDC · 02-10-2006, 01:56 PM

That seat sure looks familiar. Sent you a PM

fade94 · 02-10-2006, 01:58 PM

Quote:

Originally Posted by MDC

That seat sure looks familiar. Sent you a PM

I bet it does..

HeavyD · 02-10-2006, 02:23 PM

Nice truck. Can you tell me the color name and code off the glovebox sticker? Thanks. As for wheels I vote for polished aluminum slots..they look nice on these trucks.

MDC · 02-10-2006, 02:27 PM

Good Luck. If you need help w/ anything, give me a shout.

fade94 · 02-10-2006, 02:48 PM

Quote:

Originally Posted by HeavyD

Nice truck. Can you tell me the color name and code off the glovebox sticker? Thanks. As for wheels I vote for polished aluminum slots..they look nice on these trucks.

I'll look tonight.

Southedisto · 02-10-2006, 02:51 PM

Good luck and keep us posted.

fade94 · 02-14-2006, 10:04 PM

Quote:

Originally Posted by HeavyD

Nice truck. Can you tell me the color name and code off the glovebox sticker? Thanks. As for wheels I vote for polished aluminum slots..they look nice on these trucks.

Here is the sheet. Sorry it took so long.

krue · 02-14-2006, 10:32 PM

Good luck with it, should look good when you're done.

chevy_fatman · 02-14-2006, 10:50 PM

Sounds like a plan! keeps us updated

HeavyD · 02-15-2006, 12:18 PM

Thanks for the info.

02-10-2006, 01:43 PM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	And so, it begins....the rebuild I will be starting on my truck next weekend. Plans are as follows: Shorten frame, shorten bed, install rear fuel cell, lower front and rear, install air, tilt and cruise. (Yes, I have all three ready to go in) , nice allum wheels (unknow design just yet), AM/FM CD with subs and components, figerglass kick panels, custom door panels. Recover seat to match grey and black interior, behind the light fuel fill. Sport front and rear chrome bumpers. Truck will be black on top to body line, then silver from there down. Swapping the front clip for 67-68 clip. I already have the PS and Power disk installed. Motor: 355, 9.5.1, 2.02 double hump heads (worked). Shooting for 300 hp minimum. TH400 trans that I will build myself, dual exhaust dumped at the axle with 40 series Flowmasters. First step is to install my new rockers. Then the shortening begins. I have everything except, the wheels, tires and bumpers. Just have to do the labor now. Parts will be up for sell as they are replaced. clip for sale http://67-72chevytrucks.com/vboard/s...d.php?t=188942 Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

02-10-2006, 01:44 PM	#2
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: And so, it begins....the rebuild More before pics. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

02-10-2006, 01:51 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: And so, it begins....the rebuild It sounds so simple right now like you'll have it done in two weekends. Good luck! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 02-10-2006 at 01:52 PM.

02-10-2006, 01:53 PM	#4
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: And so, it begins....the rebuild Good Luck! Is that a longhorn?? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-10-2006, 01:54 PM	#5
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: And so, it begins....the rebuild no kidding. I've been steadily gathering parts for it via purchase, trade and barter. Now that my son't truck is done until he gets some cash of his own, I can start on mine. The only major part of the whole thing is the shortening of the frame and bed. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

02-10-2006, 01:55 PM	#6
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: And so, it begins....the rebuild When I first got it, I thought it might be a longhorn. But, I measured the bed and it's only 8' so I don't think so. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 02-10-2006 at 01:56 PM.

02-10-2006, 01:56 PM	#7
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: And so, it begins....the rebuild That seat sure looks familiar. Sent you a PM __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

02-10-2006, 02:23 PM	#9
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,170	Re: And so, it begins....the rebuild Nice truck. Can you tell me the color name and code off the glovebox sticker? Thanks. As for wheels I vote for polished aluminum slots..they look nice on these trucks. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-10-2006, 02:27 PM	#10
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: And so, it begins....the rebuild Good Luck. If you need help w/ anything, give me a shout. __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

02-10-2006, 02:51 PM	#12
Southedisto River life...... Join Date: Oct 2005 Location: Orangeburg SC Posts: 1,078	Re: And so, it begins....the rebuild Good luck and keep us posted. __________________ I like wheelin in Dixie!

02-14-2006, 10:32 PM	#14
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: And so, it begins....the rebuild Good luck with it, should look good when you're done. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-14-2006, 10:50 PM	#15
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Re: And so, it begins....the rebuild Sounds like a plan! keeps us updated __________________ Paul How do you make the invisible, visible?.........You take it away.

02-15-2006, 12:18 PM	#16
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,170	Re: And so, it begins....the rebuild Thanks for the info. __________________ "You can take the man out of PA, but you can't take PA out of the man"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.