04-14-2008, 08:12 AM | #1 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
March upgrades
When I removed the mid 80's 305 from my truck and replaced it with the 383 stroker...I ran into one issue after another with the brackets and pulleys for the accessories. I finally decided since I'd be keeping this motor for another project anyway, I might as well spend some money on it to replace the metric and mismatched crap with SAE stuff. I looked and looked...and decided to solve the problem with March brackets and pulleys. Its the sbc performance serpentine conversion setup they sell in the custom finish. I figured I didn't need polished...the silver powdercoat was flashy enough.
now I wish the motor was detailed. oh well......here's pics: brackets and pulleys installed minus w/p pulley. install complete. uses 6 rib crank/alt/wp pulley and 5 rib ps pulley. shroud comes back so far they're kind of hard to see. slowly but surely its getting there. hopefully fairly soon I'll be bringing my other chassis home and starting the real build.
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
04-14-2008, 09:37 AM | #2 |
Registered User
Join Date: Jun 2000
Location: Omaha NE 68122
Posts: 637
|
Re: March upgrades
need to list price
__________________
71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers |
04-14-2008, 09:39 AM | #3 |
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: March upgrades
i don't think it's for sale. Looks like a post meant for another forum
|
04-14-2008, 04:02 PM | #4 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,672
|
Re: March upgrades
Nice looking setup.
You're over to the correct board now too.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
04-14-2008, 07:14 PM | #5 |
Registered User
Join Date: Jun 2000
Location: Omaha NE 68122
Posts: 637
|
Re: March upgrades
dang i was hopping he was selling them that is a sweet looking setup
__________________
71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers |
04-14-2008, 08:38 PM | #6 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: March upgrades
Oh crap!
No! They're not for sale! Thanks for moving...didn't realize I posted it in the wrong forum.
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
04-14-2008, 10:35 PM | #7 |
Chasin' the Dream
Join Date: Mar 2008
Location: Lost in the 70's
Posts: 200
|
Re: March upgrades
Nice lookin set-up! Makes the PS reservoir easily accessible.
|
04-14-2008, 11:16 PM | #8 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: March upgrades
68GMCCustom- I love that setup! I want that for my truck Can you post the part numbers for that conversion including part numbers for the belts?. Where did you get it?
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
04-14-2008, 11:24 PM | #9 |
Registered User
Join Date: Jan 2008
Location: Chesapeake Beach, MD
Posts: 812
|
Re: March upgrades
i have the complete Polished march kit along with chrome PS pump and Alt, polished water pump as well. there a pic in my sig. im glad i went that route
BTW looking good
__________________
71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg |
04-14-2008, 11:28 PM | #10 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: March upgrades
Looks awesome too!. What headers are those and could you post your part number for the kit?
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
04-14-2008, 11:51 PM | #11 |
Registered User
Join Date: Jan 2008
Location: Chesapeake Beach, MD
Posts: 812
|
Re: March upgrades
headers are comp hooker ceramic long tubes. 2840-1 and they were like 670 thru summit. the march kit was # 22050 got it thru a local speed shop for 499 but that didnt include the pumps and alt.. they were separate. the water & PS pumps are Tuff Stuff # 6176A & 1449NB. alt was a cheapy no name thru the local speed shop it was like 129
belts are DAYCO #s 5060425 & 5060360 hope this helps
__________________
71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg |
04-15-2008, 12:20 AM | #12 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: March upgrades
Thanks lowriden58
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
04-15-2008, 10:25 AM | #13 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: March upgrades
Thanks all!
The March kit is the silver powdercoat one and part #22021-09 (only $340 at Summit). Belts I got from O'Rielly were Gates, K050335 ($17) for the p/s and K060410 ($22) for the w/p and alt...though a K060415 might have gone on a little easier. I went with the silver because it was about $100 less and I figured if I ever decide to make that motor a show piece, I can polish the powdercoat off then if necessary have the brackets and pulleys clear powdercoated. BTW...looks a little different now. That alternator decided to die when I hit my driving lights tonight so I had to replace it.
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 04-15-2008 at 10:27 AM. |
04-15-2008, 10:46 AM | #14 |
Registered User
Join Date: Mar 2004
Location: CA
Posts: 2,057
|
Re: March upgrades
|
04-15-2008, 01:55 PM | #15 | |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: March upgrades
Quote:
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
Bookmarks |
|
|