aftermarket beds? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redneckdds · 11-25-2005, 02:03 AM

do the catalog companies manufacture complete beds for the 67-72's? or at least the floor board for a sb?

roj2323 · 11-25-2005, 02:23 AM

in parts yes. pre-assembled no. you can get any part you want for your bed short, long, fleet, or step. there are even a few who even make steel floors allthough i think there sold only in half's. be prepared to shell out about $1500 for a complete bed.

Longhorn Man · 11-25-2005, 02:28 AM

Actually, it has been a while since I looked at new stuff, but I don't ever remember a 8 foot bed side being done.... nor steel floors, only wood.

ol yellow 72 · 11-25-2005, 02:55 AM

yea if any one knows of a place that has new 8 foot fleetside bed sides id like to know too

Deuce · 11-25-2005, 12:57 PM

$1500!!!!! Cost me over $3000 canadian!!! I wanna move south.

roj2323 · 11-25-2005, 01:37 PM

i've seen them at least in the lmc catalog. i've seen them in other catalogs as well but i would have to dig through my pile of 30+ to figure out which.

ondrew

chuck1960 · 11-25-2005, 01:43 PM

I bought a complete new bed and was'nt very happy with the tailgate fit.
had to drill the spotwelds at both rear stake hole posts and reposition the sides and top bed rail angle, then reweld and body work everything. It looks better but did not expect the work out of new parts. Seems quality control at manufacturer could be better.

**1970 CST Short Wide** · 11-25-2005, 10:19 PM

Come on out to sunny CA. I've got a long bed in nice shape just waiting for a new home.

chevy_fatman · 11-26-2005, 05:04 AM

Quote:

Originally Posted by Longhorn Man

Actually, it has been a while since I looked at new stuff, but I don't ever remember a 8 foot bed side being done.... nor steel floors, only wood.

Andy, in one of those trucks magazines there was a guy that makes custom order beds to your specs, if you want a 9 foot step bed, he willl make it, anything you can think of he can do it, I'll see if I can take a good pic of the article as I don't have a scanner.

**Palf70Step** · 11-26-2005, 08:22 AM

Your best bet is to check out the parts boards for a complete bed. Like a few mentioned I had not seen long bead parst new, but plenty of short bed components. I have not seen the metal fleet beds repopped though. You are pretty much stuck with wood in that case.

*hoser* · 11-26-2005, 09:56 AM

Quote:

Originally Posted by Palf70Step

Your best bet is to check out the parts boards for a complete bed. Like a few mentioned I had not seen long bead parst new, but plenty of short bed components. I have not seen the metal fleet beds repopped though. You are pretty much stuck with wood in that case.

Where are the "parts boards"

Thanks

**Palf70Step** · 11-26-2005, 10:35 AM

You can go to the top of the page and click on the
"The 1947 - 1998 Chevrolet & GMC Pickup Message Board Network"
and it'll take you to the boards main page from there you'll see all the boards, including the parts boards.

In case you don't see where I'm talking about, hereis the link to the main page
http://67-72chevytrucks.com/vboard/index.php

1970C10LWB · 02-03-2006, 11:37 PM

You Can Tey Going To Impala Bobs Web Sight They Sell The Front And Rear Halves For A Longbed Side All You Need To Do Is Some Weling And Bodywork. If All Else Fails

**truckdude239** · 02-04-2006, 12:47 AM

Quote:

Originally Posted by Longhorn Man

Actually, it has been a while since I looked at new stuff, but I don't ever remember a 8 foot bed side being done.... nor steel floors, only wood.

nope the 8 foot bedsides have't been done yet i wish they were i'd have 2 of them get rid of my bondo

**special-K** · 02-04-2006, 08:24 AM

8' Fleetsides:N/A

Chrome8 · 02-04-2006, 11:57 AM

I saw a complete Fiberglass bed once, actually they make the cabs also.....I never considered this but here's the link. http://usbodysource.com/ they are spendy as hell. Just a thought.

11-25-2005, 02:03 AM	#1
redneckdds Senior Member Join Date: Nov 2005 Location: Queen Creek, AZ Posts: 218	aftermarket beds? do the catalog companies manufacture complete beds for the 67-72's? or at least the floor board for a sb?

11-25-2005, 02:23 AM	#2
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: aftermarket beds? in parts yes. pre-assembled no. you can get any part you want for your bed short, long, fleet, or step. there are even a few who even make steel floors allthough i think there sold only in half's. be prepared to shell out about $1500 for a complete bed.

11-25-2005, 02:28 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: aftermarket beds? Actually, it has been a while since I looked at new stuff, but I don't ever remember a 8 foot bed side being done.... nor steel floors, only wood.

11-25-2005, 02:55 AM	#4
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 211	Re: aftermarket beds? yea if any one knows of a place that has new 8 foot fleetside bed sides id like to know too

11-25-2005, 12:57 PM	#5
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: aftermarket beds? $1500!!!!! Cost me over $3000 canadian!!! I wanna move south. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

11-25-2005, 01:37 PM	#6
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	Re: aftermarket beds? i've seen them at least in the lmc catalog. i've seen them in other catalogs as well but i would have to dig through my pile of 30+ to figure out which. ondrew

11-25-2005, 01:43 PM	#7
chuck1960 Junior Member Join Date: Oct 2005 Location: cleveland, tn. Posts: 71	Re: aftermarket beds? I bought a complete new bed and was'nt very happy with the tailgate fit. had to drill the spotwelds at both rear stake hole posts and reposition the sides and top bed rail angle, then reweld and body work everything. It looks better but did not expect the work out of new parts. Seems quality control at manufacturer could be better.

11-25-2005, 10:19 PM	#8
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,061	Re: aftermarket beds? Come on out to sunny CA. I've got a long bed in nice shape just waiting for a new home. __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

11-26-2005, 08:22 AM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,674	Re: aftermarket beds? Your best bet is to check out the parts boards for a complete bed. Like a few mentioned I had not seen long bead parst new, but plenty of short bed components. I have not seen the metal fleet beds repopped though. You are pretty much stuck with wood in that case. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-26-2005, 10:35 AM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,674	Re: aftermarket beds? You can go to the top of the page and click on the "The 1947 - 1998 Chevrolet & GMC Pickup Message Board Network" and it'll take you to the boards main page from there you'll see all the boards, including the parts boards. In case you don't see where I'm talking about, hereis the link to the main page http://67-72chevytrucks.com/vboard/index.php __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-03-2006, 11:37 PM	#13
1970C10LWB Registered User Join Date: Jan 2006 Location: MASSACHUSETTS Posts: 3	Re: aftermarket beds? You Can Tey Going To Impala Bobs Web Sight They Sell The Front And Rear Halves For A Longbed Side All You Need To Do Is Some Weling And Bodywork. If All Else Fails

02-04-2006, 08:24 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: aftermarket beds? 8' Fleetsides:N/A __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-04-2006, 11:57 AM	#16
Chrome8 Registered User Join Date: Nov 2005 Location: Park Rapids, MN Posts: 288	Re: aftermarket beds? I saw a complete Fiberglass bed once, actually they make the cabs also.....I never considered this but here's the link. http://usbodysource.com/ they are spendy as hell. Just a thought. __________________ 1969 K20 not running, complete but rusty with wrecker boom and push bumper 1969 GMC C20 un-molested rust free original paint "a 4 eyed girl named 'Tina" 1971 Chev K20 4X4 Box Delete Commercial Truck Flatbed "Choose a job you love, and you will never have to work a day in your life." Confucius



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.