side mldg - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BigBird05** · 12-01-2019, 06:31 PM

I had to remove the side door mldg from my 03 Yukon. Does anybody know how to get the rest of the 3M tape glue off of the paint? I've tryed goo gone, goff off and heat gun with a razer blade.

**Palf70Step** · 12-02-2019, 08:52 AM

I have always sprayed WD40 and rubbed it off with towl or a very fine scotchbrite pad. Had to be careful with the scotchbrite or you can scratch paint. It takes several goes at it, but the stuff came off.

bigd65 · 12-02-2019, 05:53 PM

Dont waste you money on AIRCRAFT ADHESIVE REMOVER..... wont touch it.... get the goo gone that is in the can that looks like the thin lighter fluid.... that is THE ONLY THING TGAT WOULD TOUCH IT

EVRLET · 12-03-2019, 03:43 AM

You need to use the 3M eraser wheel. Use 3M only. I’ve used that on every truck I removed the moldings from and never left a scratch. Google it.

**BigBird05** · 02-02-2020, 05:38 PM

Thanks

Redneck Rydes · 02-10-2020, 12:01 AM

X2 on the 3M wheel,just use it lightly and a final clean up with WD40,works great,it is all I use.

12-01-2019, 06:31 PM	#1
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	side mldg I had to remove the side door mldg from my 03 Yukon. Does anybody know how to get the rest of the 3M tape glue off of the paint? I've tryed goo gone, goff off and heat gun with a razer blade.

12-02-2019, 08:52 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,608	Re: side mldg I have always sprayed WD40 and rubbed it off with towl or a very fine scotchbrite pad. Had to be careful with the scotchbrite or you can scratch paint. It takes several goes at it, but the stuff came off. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 12-02-2019 at 07:47 PM.

12-02-2019, 05:53 PM	#3
bigd65 Registered User Join Date: Mar 2000 Location: Lake Jackson, TX. Posts: 1,930	Re: side mldg Dont waste you money on AIRCRAFT ADHESIVE REMOVER..... wont touch it.... get the goo gone that is in the can that looks like the thin lighter fluid.... that is THE ONLY THING TGAT WOULD TOUCH IT __________________ 2004 Silverado Crewcab (Dark Spiral Gray)

12-03-2019, 03:43 AM	#4
EVRLET Registered User Join Date: Aug 2015 Location: Las Vegas NV Posts: 354	Re: side mldg You need to use the 3M eraser wheel. Use 3M only. I’ve used that on every truck I removed the moldings from and never left a scratch. Google it. __________________ Customization is what you want it to look like -- not what other people think it should look like

02-02-2020, 05:38 PM	#5
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: side mldg Thanks

02-10-2020, 12:01 AM	#6
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: side mldg X2 on the 3M wheel,just use it lightly and a final clean up with WD40,works great,it is all I use.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.