Doors won't lock - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cory321 · 01-23-2007, 08:27 PM

Okay when i lock the doors then shut the door the lock pops back up
It wont lock with the key.Anyone know how to fix thisThanks in advance

1BadSS · 01-23-2007, 08:31 PM

Quote:

Originally Posted by cory321

Okay when i lock the doors then shut the door the lock pops back up
It wont lock with the key.Anyone know how to fix thisThanks in advance

Odd's are you'll need a new tumbler, because you cant lock the door then shut it.

cdowns · 01-23-2007, 08:40 PM

no you cant lock these doors then shut them // if it wont lock with the key try some wd-40 or lock ease sometimes moving parts work a bit better if lubricated every 30years or so

cory321 · 01-23-2007, 08:43 PM

the lock will move freely with the key it just doesn't lock

ratrod67 · 01-23-2007, 08:47 PM

Sounds like the lock rod came off. You'll need to pull the door panel off to check.

*rage'nrat638* · 01-23-2007, 08:47 PM

Quote:

Originally Posted by cdowns

no you cant lock these doors then shut them // if it wont lock with the key try some wd-40 or lock ease sometimes moving parts work a bit better if lubricated every 30years or so

dito..these trucks only lock with the key after the door is closed..

you might try pushing in on the door while you turn the key..to compress the weatherstrip..

my passenger side locks fine with the door closed. the drivers side i have to push in on the door a little to turn the key..it's fine for me..but the wife has trouble with it

cory321 · 01-23-2007, 08:51 PM

i'll try that thanks

e rock · 01-23-2007, 09:15 PM

It's only a couple clips, half a dozen screws, and maybe a flashlight to see what's really going on in there.

Spary some penetrating oil on things and I bet you'll be good to go for another 35 years. There is a little pivot arm (non-technical name) that has a large surface contact area in it's pivot point and that one is especially susceptible to freezing up with a little dry corrosion. Kind of hard to explain, but you'll see the one I'm talking about. All it takes is a little lube - not WD40 - you want something that will leave some lube behind but still wick into unexposed areas like pentrating oil does. "PB Blaster" is great stuff for this kind of work.

Longhorn Man · 01-23-2007, 09:17 PM

with the door open, can you lock and unlock the door with the key?

cory321 · 01-23-2007, 09:39 PM

Yes I can Longhorn_Man

71swb4x4 · 01-23-2007, 09:59 PM

Then you should be able to close it with Mark's tip. Just push on the door while you lock it, it should work. They must have replaced the weatherstripping when they repainted the truck.

Draggn66 · 01-23-2007, 11:55 PM

I had to do the "push in & up" thing with both doors on my 71. I replaced both the latch assemblys on the doors and they lock great now!

cory321 · 01-24-2007, 07:49 PM

I tried pushing in then locking but it still does'nt work.I am taking the door panel off tomorrow to look at it and compare it with the parts truck

sjarrett71 · 01-25-2007, 02:49 AM

Just an idea, but can open the door then lock the door, then push in on the door handle button and then shut the door and it stay locked? I know some older cars you can do that with but not sure if it applies to these trucks. I don't dare try it with mine because I have no keys for my door locks. I'm waiting for my new door panels to come in before I change them.

GREASEMONKEY72 · 01-25-2007, 03:05 AM

Quote:

Originally Posted by sjarrett71

Just an idea, but can open the door then lock the door, then push in on the door handle button and then shut the door and it stay locked? I know some older cars you can do that with but not sure if it applies to these trucks. I don't dare try it with mine because I have no keys for my door locks. I'm waiting for my new door panels to come in before I change them.

nope i tried that when i first got mine before i learned that its a safety thing the only way to lock the doors is with them closed by using the key or pushing the lock down from the inside

sjarrett71 · 01-25-2007, 03:58 AM

OK, so now I know too. Thanks.

GREASEMONKEY72 · 01-25-2007, 05:28 AM

Quote:

Originally Posted by sjarrett71

OK, so now I know too. Thanks.

youre welcome

01-23-2007, 08:27 PM	#1
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Doors won't lock Okay when i lock the doors then shut the door the lock pops back up It wont lock with the key.Anyone know how to fix thisThanks in advance __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

01-23-2007, 08:40 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Doors won't lock no you cant lock these doors then shut them // if it wont lock with the key try some wd-40 or lock ease sometimes moving parts work a bit better if lubricated every 30years or so __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-23-2007, 08:43 PM	#4
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: Doors won't lock the lock will move freely with the key it just doesn't lock __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

01-23-2007, 08:47 PM	#5
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: Doors won't lock Sounds like the lock rod came off. You'll need to pull the door panel off to check.

01-23-2007, 08:51 PM	#7
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: Doors won't lock i'll try that thanks __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

01-23-2007, 09:15 PM	#8
e rock Registered User Join Date: Nov 2006 Location: Monroe, WA Posts: 87	Re: Doors won't lock It's only a couple clips, half a dozen screws, and maybe a flashlight to see what's really going on in there. Spary some penetrating oil on things and I bet you'll be good to go for another 35 years. There is a little pivot arm (non-technical name) that has a large surface contact area in it's pivot point and that one is especially susceptible to freezing up with a little dry corrosion. Kind of hard to explain, but you'll see the one I'm talking about. All it takes is a little lube - not WD40 - you want something that will leave some lube behind but still wick into unexposed areas like pentrating oil does. "PB Blaster" is great stuff for this kind of work.

01-23-2007, 09:17 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Doors won't lock with the door open, can you lock and unlock the door with the key?

01-23-2007, 09:39 PM	#10
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: Doors won't lock Yes I can Longhorn_Man __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

01-23-2007, 09:59 PM	#11
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Doors won't lock Then you should be able to close it with Mark's tip. Just push on the door while you lock it, it should work. They must have replaced the weatherstripping when they repainted the truck. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

01-23-2007, 11:55 PM	#12
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: Doors won't lock I had to do the "push in & up" thing with both doors on my 71. I replaced both the latch assemblys on the doors and they lock great now! __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG

01-24-2007, 07:49 PM	#13
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: Doors won't lock I tried pushing in then locking but it still does'nt work.I am taking the door panel off tomorrow to look at it and compare it with the parts truck __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

01-25-2007, 02:49 AM	#14
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Doors won't lock Just an idea, but can open the door then lock the door, then push in on the door handle button and then shut the door and it stay locked? I know some older cars you can do that with but not sure if it applies to these trucks. I don't dare try it with mine because I have no keys for my door locks. I'm waiting for my new door panels to come in before I change them. __________________ -Scott-

01-25-2007, 03:58 AM	#16
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Doors won't lock OK, so now I know too. Thanks. __________________ -Scott-



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.