The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-12-2021, 03:47 PM   #26
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

For a long time a little update.
We had to build an extra garage for Chevy where we can store it for the winters. At the same time, we built more storage space.

I haven’t had time to do anything for BMW in about seven months because all the time went into the garage expansion. My hands were also so painful that I had to heal them.
Attached Images
     
MrFinland is offline   Reply With Quote
Old 01-12-2021, 03:53 PM   #27
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Yesterday I went to the garage a bit to continue welding BMW for a long time.
Attached Images
  
MrFinland is offline   Reply With Quote
Old 01-12-2021, 04:09 PM   #28
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by Russell Ashley View Post
Still following along. You are doing nice work. We don't have snow here so it was never driven in salt, so I never had to contend with any rust thankfully. My BMW was a 528E, I'm not sure if that was a E30 model as I never heard it referred to by that number. Keep up the good work.
Thank you so much Russell Ashley! That your BMW 528E has probably been an E28 model. It's a great car!
MrFinland is offline   Reply With Quote
Old 02-14-2021, 04:13 PM   #29
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

A few weeks ago I bought another BMW E30 -90. This is 318is (16 valves) and it has been standing for about 5 years. Here is also the original sport interior and sunroof. The engine is a bit tuned and has 162 hp. I’m supposed to make this look completely original from the outside.
Attached Images
    
MrFinland is offline   Reply With Quote
Old 03-24-2022, 04:02 AM   #30
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

It’s been a long time since I last posted anything here. Restoring my own BMW 325i stopped for about a year when I restored my wife’s BMW 318 iS car. Here are some project images from the 318 iS.
Attached Images
     
MrFinland is offline   Reply With Quote
Old 03-24-2022, 04:12 AM   #31
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

More BMW 318iS project pictures...
Attached Images
     
MrFinland is offline   Reply With Quote
Old 03-24-2022, 04:20 AM   #32
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

More BMW 318iS project pictures...
Attached Images
     
MrFinland is offline   Reply With Quote
Old 03-24-2022, 04:28 AM   #33
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

More BMW 318iS project pictures...
Attached Images
     
MrFinland is offline   Reply With Quote
Old 03-24-2022, 04:38 AM   #34
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

More BMW 318iS project pictures...
Attached Images
     
MrFinland is offline   Reply With Quote
Old 03-24-2022, 04:45 AM   #35
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

More BMW 318iS pictures...
Attached Images
     
MrFinland is offline   Reply With Quote
Old 03-24-2022, 10:28 AM   #36
LEEVON
Registered User
 
LEEVON's Avatar
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,887
Re: BMW 325i 1989 restoration

You sir have some great fab skills! Nice transformation!
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
LEEVON is offline   Reply With Quote
Old 03-24-2022, 05:33 PM   #37
LS short box
Registered User
 
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,885
Re: BMW 325i 1989 restoration

Nice work.
I took the easy way out adding power to my 99 E-36. I swapped in a LS/T56 combo. It was a great project.
Attached Images
  
LS short box is offline   Reply With Quote
Old 03-26-2022, 01:41 AM   #38
LT7A
Registered User
 
Join Date: Oct 2015
Location: PNW
Posts: 3,472
Re: BMW 325i 1989 restoration

Mr. Finland! Good to see you back Ilkka! You did a nice job on your garage addition. Glad to see you get started on your next car. I wonder about the story though. Did your wife see it and like it so much that she wanted one? And because you are a smart man, you built hers first? Haha. There is a 318is in my neighborhood that has been sitting since 2007. I have stopped by and let my neighbor know that if they want to free up their driveway, that I would be happy to help them by buying that car. It is black like yours, but just the 318 sport. I will be following along and glad to see that you can get back to your 325e. I really like your plan of putting a longer crankshaft in there. And with those forged pistons you should be able to run a high compression ratio. I like turbo cars, but large displacement naturally aspirated ones have instantaneous power which is also fun. Welcome back. I hope that you and your family have been doing okay with this worldwide crazy pandemic.
LT7A is online now   Reply With Quote
Old 03-29-2022, 06:12 AM   #39
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by LEEVON View Post
You sir have some great fab skills! Nice transformation!
Thank you very much LEEVON! I’m just trying to do my best and I hope that’s enough.
MrFinland is offline   Reply With Quote
Old 03-29-2022, 06:18 AM   #40
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by LS short box View Post
Nice work.
I took the easy way out adding power to my 99 E-36. I swapped in a LS/T56 combo. It was a great project.
Thank you very much LS short box!
Wow! Great BMW E36 for you! Was it hard to get the LS engine to fit? How much horsepower and torque is there? I have also had several E36 body styles and those are good to drive, especially the coupe was really good and stable to drive on the track.
MrFinland is offline   Reply With Quote
Old 03-29-2022, 06:33 AM   #41
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by LT7A View Post
Mr. Finland! Good to see you back Ilkka! You did a nice job on your garage addition. Glad to see you get started on your next car. I wonder about the story though. Did your wife see it and like it so much that she wanted one? And because you are a smart man, you built hers first? Haha. There is a 318is in my neighborhood that has been sitting since 2007. I have stopped by and let my neighbor know that if they want to free up their driveway, that I would be happy to help them by buying that car. It is black like yours, but just the 318 sport. I will be following along and glad to see that you can get back to your 325e. I really like your plan of putting a longer crankshaft in there. And with those forged pistons you should be able to run a high compression ratio. I like turbo cars, but large displacement naturally aspirated ones have instantaneous power which is also fun. Welcome back. I hope that you and your family have been doing okay with this worldwide crazy pandemic.

Thank you very much LT7A! Nice to hear from you for a long time too.
As for my wife’s car, I said she wants and needs a summer car. HAHA! Otherwise I would have had to sell it, but I didn’t want to sell it because it’s a pretty rare original 318iS with a 16-valve engine.
Does your neighbor's BMW also have the same body style as our E30? You have to buy it so you can enjoy a little fun BMW. Is it 8- or 16-valve?
I have started restarting my 325i and will upload more project pictures of it here one day. I had a dream to get the engine in place this summer and get to try a new engine, but I don’t have any time to get the chassis and engine bay ready by then. I also like the turbo engine but I want this 325i to look original but still more powerful than standard. Here in Finland, a lot of turbo engines are also built for these and that is why I want to do a little differently than everyone else.
Our family has done well with this pandemic so far, hopefully you too and your family also. More annoying is that crazy "neighbor" Putin who attacked Ukraine.
MrFinland is offline   Reply With Quote
Old 03-29-2022, 08:36 PM   #42
LS short box
Registered User
 
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,885
Re: BMW 325i 1989 restoration

On my E36 project it had a built LS6. Small cam. 390 HP on the chassis dyno. I bought a bunch of used M3 stuff as others were upgrading their cars.
I like the build/fab part and I am cheap so going off of pics on the internet I built the motor/trans mounts and the headers. The LS fits well. Upgraded to a aftermarket radiator. Fabbed the 2.5 inch exhaust. You can buy a complete kit to do the swap.
The down side is the rear end. It's a bit fragile if you have sticky tires. I didn't have any problems but others have.
LS short box is offline   Reply With Quote
Old 03-30-2022, 09:27 AM   #43
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,640
Re: BMW 325i 1989 restoration

Mr Finnland, you did a beautiful job on that 318is, almost makes me want my old 528E back. You know body work very well. I like those plaid seat covers.
Russell Ashley is offline   Reply With Quote
Old 03-31-2022, 02:30 PM   #44
KShortell
Registered User
 
KShortell's Avatar
 
Join Date: Oct 2003
Location: Chesapeake, VA
Posts: 722
Re: BMW 325i 1989 restoration

It looks GREAT!
__________________
Semper Paratus
KShortell is offline   Reply With Quote
Old 04-01-2022, 01:53 PM   #45
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by LS short box View Post
On my E36 project it had a built LS6. Small cam. 390 HP on the chassis dyno. I bought a bunch of used M3 stuff as others were upgrading their cars.
I like the build/fab part and I am cheap so going off of pics on the internet I built the motor/trans mounts and the headers. The LS fits well. Upgraded to a aftermarket radiator. Fabbed the 2.5 inch exhaust. You can buy a complete kit to do the swap.
The down side is the rear end. It's a bit fragile if you have sticky tires. I didn't have any problems but others have.
The great and powerful E36 you have now. I like it when it looks original but still has a lot of power. Your car has more power than the original M3. Have you welded more sheet metal to the rear frame and body mounting points? On one of my E36 325i, the entire rear axle tore off the body. Sorry my bad english, hopefully you understand what I mean.
MrFinland is offline   Reply With Quote
Old 04-01-2022, 02:18 PM   #46
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by Russell Ashley View Post
Mr Finnland, you did a beautiful job on that 318is, almost makes me want my old 528E back. You know body work very well. I like those plaid seat covers.
Thank you so much Russell Ashley! I would also like 500 body models of the E28 in the series, but my wife thinks there are enough hobby cars now and she said that no more cars are reportedly needed.
That interior of the 318is looks the same as a skirt for Scottish men. Nevertheless, I think it looks good too.
MrFinland is offline   Reply With Quote
Old 04-01-2022, 02:20 PM   #47
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by KShortell View Post
It looks GREAT!
Thank you very much KShortell!
MrFinland is offline   Reply With Quote
Old 04-01-2022, 02:44 PM   #48
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

I finally got to continue restoring my 325i. I took off the front and rear axles and sandblasted the parts and took the parts to the painter.
Attached Images
     

Last edited by MrFinland; 04-01-2022 at 02:58 PM.
MrFinland is offline   Reply With Quote
Old 04-01-2022, 04:50 PM   #49
LS short box
Registered User
 
Join Date: Jun 2015
Location: Carlos MN
Posts: 1,885
Re: BMW 325i 1989 restoration

I didn't add any metal structure to the back of the car. The was just a cruiser with zero track time. I know per Bimmer Forums many do add metal reinforcements to spring perches and cross brace between the wheel wheels. As I understand the convertibles have a bit more frame structure due to the convertible top.
Your parts are looking good.
LS short box is offline   Reply With Quote
Old 04-02-2022, 04:02 PM   #50
MrFinland
Registered User
 
MrFinland's Avatar
 
Join Date: Feb 2017
Location: Kokkola (Kälviä), FINLAND
Posts: 346
Re: BMW 325i 1989 restoration

Quote:
Originally Posted by LS short box View Post
I didn't add any metal structure to the back of the car. The was just a cruiser with zero track time. I know per Bimmer Forums many do add metal reinforcements to spring perches and cross brace between the wheel wheels. As I understand the convertibles have a bit more frame structure due to the convertible top.
Your parts are looking good.
Alright. I think the rear frame will last intact if you drive wisely.
MrFinland is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com