MO NOS GM Hydro Boost Unit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 08-05-2019, 12:07 AM

NOS mid 80s GM hydro boost unit 120.00 shipped plus Paypal fees

**bcnya2** · 08-06-2019, 02:16 PM

Hello......what else is required for this to function?

Thanks, Greg

**bcnya2** · 08-06-2019, 07:29 PM

Do you have the rod that goes to the master cylinder? Do you have a part number I could do a little more homework? Is there a box?

BLAZERMAN · 08-06-2019, 07:33 PM

You would need a master cylinder and hydraulic lines to tie into your power steering pump. The mounting bracket on this one can be modified to fit the factory mounting or there's a guy on this board that sells a special bracket he makes that allows you to bolt it right up.

BLAZERMAN · 08-08-2019, 09:39 PM

Quote:

Originally Posted by bcnya2

Do you have the rod that goes to the master cylinder? Do you have a part number I could do a little more homework? Is there a box?

Sorry somehow I missed this post. No I dont have a pushrod for the master cylinder. I can find a part number on the unit itself and dont have the box. Ive had it on my parts shelf since I got it back in 01. I was told it was mid 80s, I believe the same unit was used between 2 and 4 wheel drive and even CUCVs. The guy I got it from dealt in CUCV parts.

**Madkidd007** · 08-08-2019, 09:52 PM

Here is a reman unit for a 1990 square body suburban for comparison. The only way you’ll buy the correct rod is used, in my case I cut down a rod from a vacuum booster. Also if I remember correctly by bracket looked like the one pictured before I cut the extra off.

**Madkidd007** · 08-08-2019, 09:59 PM

This is by no means meant to be an insulting offer but if for some reason it doesn’t sell I would give $60. Just know I would be valuing it as a core not as a low ball offer

BLAZERMAN · 08-16-2019, 10:38 PM

Last chance before it goes back on the shelf. 85.00 Shipped

Nicks33 · 10-20-2019, 01:56 PM

Hey Blazerman, any part numbers on the hydro boost for cross reference? Thanks

88Stanger · 11-05-2019, 10:17 AM

someone mentioned that there is a person on here that has the bracket you need, lookup CaptainFab, this guys makes them and they are perfect. He makes them based on years also. Good Luck

08-05-2019, 12:07 AM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	NOS GM Hydro Boost Unit NOS mid 80s GM hydro boost unit 120.00 shipped plus Paypal fees Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-06-2019, 02:16 PM	#2
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: NOS GM Hydro Boost Unit Hello......what else is required for this to function? Thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

08-06-2019, 07:29 PM	#3
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: NOS GM Hydro Boost Unit Do you have the rod that goes to the master cylinder? Do you have a part number I could do a little more homework? Is there a box? __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop Last edited by bcnya2; 08-06-2019 at 08:17 PM. Reason: Wrong word

08-06-2019, 07:33 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: NOS GM Hydro Boost Unit You would need a master cylinder and hydraulic lines to tie into your power steering pump. The mounting bracket on this one can be modified to fit the factory mounting or there's a guy on this board that sells a special bracket he makes that allows you to bolt it right up. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-08-2019, 09:52 PM	#6
Madkidd007 Senior Member Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,236	Re: NOS GM Hydro Boost Unit Here is a reman unit for a 1990 square body suburban for comparison. The only way you’ll buy the correct rod is used, in my case I cut down a rod from a vacuum booster. Also if I remember correctly by bracket looked like the one pictured before I cut the extra off. Attached Images __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

08-08-2019, 09:59 PM	#7
Madkidd007 Senior Member Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,236	Re: NOS GM Hydro Boost Unit This is by no means meant to be an insulting offer but if for some reason it doesn’t sell I would give $60. Just know I would be valuing it as a core not as a low ball offer __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

08-16-2019, 10:38 PM	#8
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: NOS GM Hydro Boost Unit Last chance before it goes back on the shelf. 85.00 Shipped __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

10-20-2019, 01:56 PM	#9
Nicks33 Registered User Join Date: Jan 2018 Location: Mooresville, NC Posts: 71	Re: NOS GM Hydro Boost Unit Hey Blazerman, any part numbers on the hydro boost for cross reference? Thanks

11-05-2019, 10:17 AM	#10
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,644	Re: NOS GM Hydro Boost Unit someone mentioned that there is a person on here that has the bracket you need, lookup CaptainFab, this guys makes them and they are perfect. He makes them based on years also. Good Luck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.