How about some pics of 67-72 Trucks - Page 102 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

denny5625 · 09-28-2010, 10:24 PM

Quote:

Originally Posted by eightbanger

Hello baby!!

Whats the specs on the drop..static? bagged? Info on the wheels as well please. More pics would be cool also. Thanks.

The drop is all air ride tech with drop spindles. The wheels are Centerline 15 x 7 front and 15 x 10 in the rear with 5" backspace with BFG 295/50-15.

oats84 · 02-19-2010, 07:11 PM

here is mine 69 350/465/205 44/12blt

**WIDESIDE72** · 02-20-2010, 10:06 AM

Here are a few of an original paint 71 Cheyenne Super my brother bought in Port Lavaca Texas a few years back for $4000 (!). It was a HARD loaded truck with FACTORY 402 BB/ TH400, AC, tilt, tach factory AM FM, FACTORY CRUISE CONTROL (WORKING!), front sway bar and in bed spare tire mount. I don't have a picture of the SPID, but I think he does. It also had AC Delco rear air shocks with onboard compressor. There was a gauge and control under the dash to air up the shocks. It was not on the SPID, but the control had "AC DELCO" on it, leading me to believe it might have been dealer installed (?). The only thing I can think of that it didn't have was bucket seats. After putting new tires, shocks and tuning it up, he DROVE it back to Virginia where he lives. we threw the old camper shell I had on it to cover some other things he was taking back. I think it looks "period correct" on there. He said he got around 12mpg. He drove it a while, then sold it for $14,500 (!) I think the pics are kinda cool, as I took them with a low res cell phone camera, so they look old, even though they aren't.

**WIDESIDE72** · 02-20-2010, 10:07 AM

The bumper guards were on the SPID too if I remember correctly.
It also had the bedside toolbox.

**WIDESIDE72** · 02-20-2010, 10:09 AM

I forget where I came across this pic. it is not my truck, but makes me sad...

**WIDESIDE72** · 02-20-2010, 10:12 AM

Is it a 71-72 with a 68 clip, or a 68 with 71-72 front axle/ disc brakes? I am leaning toward 71-72 with a 68 clip, due to the 73-80 bumper... I kept mad when I think about those needles and leaves getting down into the cowl...It's a shot step 4x4 for pete's sake!!!

**WIDESIDE72** · 02-20-2010, 10:16 AM

TOO COOL... That's Mt. Shasta in the background...

tdp67 · 04-27-2010, 05:04 PM

Quote:

Originally Posted by WIDESIDE72

TOO COOL... That's Mt. Shasta in the background...

Where are they going?

**WIDESIDE72** · 02-20-2010, 10:20 AM

Two of my favorite things... AA Fuel Altered and a 67-72 truck. Judging by the flat front edge of the hood and the slanted fender trim, I think it is a GMC (69-72?)

bushytlb · 02-21-2010, 12:45 PM

Wideside72; don't dis-spare. Here is a photo that invokes sadness. Didn't seem so at the time but now does. The neighbors dog got his head caught in the passenger side light bezel. Of course the neighbors are rescue fire fighters an went after the radiator support with a Herst tool (jaws of life). Name: 67 c10 once had a nice front grill.jpg
Views: 3573
Size: 64.0 KB

Name: 67 c10 once had a nice front grill.jpg
Views: 3573
Size: 64.0 KB

bushy
By the way great photo of Mt. Shasta and that string of gems.

gonzo6869 · 02-21-2010, 03:09 PM

Just got done redoing my front gill and painting the inside of the engine bay. I know how much everyone likes pics, so here you go:

Painted the insert gloss black and buffed out the aluminum

I had just got done washing the truck, so there are a lot of spots and yes there are still some scratches, but for those of you who have done this, you know what a big pain it is.

and more

NINERS1 · 02-21-2010, 04:32 PM

it has a 3.5- 5 drop with cpp spindles and coils, 402 stroked 350- 400 turbo, 12 bolt rear, 17" torque thrust 8" front and 10" rear, painless harness, wired my cargo light for a 3rd brake light. front sway bar. getting ready to rebuild front end and do brakes. Then all I have left is fix my transmission leak and paint and body!!!

**WIDESIDE72** · 02-20-2010, 10:21 AM

This one might already be in this thread... HELL TO THE YEA, D-Wayne! That's what I'm talkin' 'bout right there!

djracer · 02-20-2010, 07:48 PM

Quote:

Originally Posted by WIDESIDE72

This one might already be in this thread... HELL TO THE YEA, D-Wayne! That's what I'm talkin' 'bout right there!

That is Funny.

Crumley · 02-20-2010, 08:40 PM

I have 72 GMC ffinished enough to post here

Camaro_nut2001 · 02-20-2010, 10:13 PM

Quote:

Originally Posted by Crumley

I have 72 GMC ffinished enough to post here

WOW! Sharp truck.

Longhorn321 · 02-21-2010, 11:51 AM

Quote:

Originally Posted by Crumley

I have 72 GMC ffinished enough to post here

It does not have to be finished to be here.

Quote:

Originally Posted by Camaro_nut2001

WOW! Sharp truck.

X2....Nice shop too. Is the shop yours?

Longhorn321 · 02-21-2010, 11:54 AM

Quote:

Originally Posted by WIDESIDE72

This one might already be in this thread... HELL TO THE YEA, D-Wayne! That's what I'm talkin' 'bout right there!

Careful now....My name is Dwayne and I have a truck simillar to the one he is leaning on and a '69 which is represented by the "Bling" around his neck.

That is some funny chit tho!

Crumley · 02-21-2010, 11:59 AM

Yes the shop is mine. It is 40' x 60' (not big enough) in the side yard. Its nice to be able to go out and work on a project and leave everything sitting and turn the lights off and lock the door. Beats the heck out of watching t.v.

Longhorn321 · 02-21-2010, 12:03 PM

Quote:

Originally Posted by Crumley

Yes the shop is mine. It is 40' x 60' (not big enough).

**WIDESIDE72** · 02-20-2010, 10:25 AM

pic

VA72C10 · 02-20-2010, 10:16 PM

very nice

woodwright · 02-20-2010, 10:31 PM

Crumley, nice truck! What is your tire/lift combo? I really like that stance.

Crumley · 02-21-2010, 10:14 AM

Thanks, the truck has a 6" spring lift with 35x12.5x15 tires on stock GM 15x8 rally rims.

Dads 68 GMC · 02-21-2010, 10:57 AM

looks great!!!! what color blue is that?

02-19-2010, 07:11 PM	#2
oats84 Registered User Join Date: Sep 2009 Location: Grand junction Co Posts: 42	Re: How about some pics of 67-72 Trucks here is mine 69 350/465/205 44/12blt Attached Images __________________ 1989 jimmy "U.A.V" 44/14blt 4.56s locked up 37's 1984 2wd swb 1969 swb 4x4

02-20-2010, 10:06 AM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks Here are a few of an original paint 71 Cheyenne Super my brother bought in Port Lavaca Texas a few years back for $4000 (!). It was a HARD loaded truck with FACTORY 402 BB/ TH400, AC, tilt, tach factory AM FM, FACTORY CRUISE CONTROL (WORKING!), front sway bar and in bed spare tire mount. I don't have a picture of the SPID, but I think he does. It also had AC Delco rear air shocks with onboard compressor. There was a gauge and control under the dash to air up the shocks. It was not on the SPID, but the control had "AC DELCO" on it, leading me to believe it might have been dealer installed (?). The only thing I can think of that it didn't have was bucket seats. After putting new tires, shocks and tuning it up, he DROVE it back to Virginia where he lives. we threw the old camper shell I had on it to cover some other things he was taking back. I think it looks "period correct" on there. He said he got around 12mpg. He drove it a while, then sold it for $14,500 (!) I think the pics are kinda cool, as I took them with a low res cell phone camera, so they look old, even though they aren't. Attached Images

02-20-2010, 10:07 AM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks The bumper guards were on the SPID too if I remember correctly. It also had the bedside toolbox.

02-20-2010, 10:09 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks I forget where I came across this pic. it is not my truck, but makes me sad... Attached Images

02-20-2010, 10:12 AM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks Is it a 71-72 with a 68 clip, or a 68 with 71-72 front axle/ disc brakes? I am leaning toward 71-72 with a 68 clip, due to the 73-80 bumper... I kept mad when I think about those needles and leaves getting down into the cowl...It's a shot step 4x4 for pete's sake!!!

02-20-2010, 10:16 AM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks TOO COOL... That's Mt. Shasta in the background... Attached Images

02-20-2010, 10:20 AM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks Two of my favorite things... AA Fuel Altered and a 67-72 truck. Judging by the flat front edge of the hood and the slanted fender trim, I think it is a GMC (69-72?)

02-21-2010, 12:45 PM	#10
bushytlb Registered User Join Date: Jan 2010 Location: Chaumont, new york Posts: 68	Re: How about some pics of 67-72 Trucks Wideside72; don't dis-spare. Here is a photo that invokes sadness. Didn't seem so at the time but now does. The neighbors dog got his head caught in the passenger side light bezel. Of course the neighbors are rescue fire fighters an went after the radiator support with a Herst tool (jaws of life). bushy By the way great photo of Mt. Shasta and that string of gems. Last edited by bushytlb; 02-21-2010 at 12:52 PM.

02-21-2010, 03:09 PM	#11
gonzo6869 Cops, ha, catch me if you can! Join Date: Jun 2009 Location: Santa Barbara, CA. Posts: 271	Re: How about some pics of 67-72 Trucks Just got done redoing my front gill and painting the inside of the engine bay. I know how much everyone likes pics, so here you go: Painted the insert gloss black and buffed out the aluminum I had just got done washing the truck, so there are a lot of spots and yes there are still some scratches, but for those of you who have done this, you know what a big pain it is. and more __________________ 72 C-10 Stepper 350/TH350 3.73 in the back Edelbrock intake and Carb Hooker Comp Headers 275/60R15 on Rallies Last edited by gonzo6869; 02-21-2010 at 05:00 PM.

02-21-2010, 04:32 PM	#12
NINERS1 Registered User Join Date: Feb 2006 Location: weatherford ok. Posts: 255	Re: How about some pics of 67-72 Trucks it has a 3.5- 5 drop with cpp spindles and coils, 402 stroked 350- 400 turbo, 12 bolt rear, 17" torque thrust 8" front and 10" rear, painless harness, wired my cargo light for a 3rd brake light. front sway bar. getting ready to rebuild front end and do brakes. Then all I have left is fix my transmission leak and paint and body!!! Last edited by NINERS1; 02-21-2010 at 06:27 PM.

02-20-2010, 10:21 AM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks This one might already be in this thread... HELL TO THE YEA, D-Wayne! That's what I'm talkin' 'bout right there! Attached Images

02-20-2010, 08:40 PM	#15
Crumley Registered User Join Date: Mar 2008 Location: Sharpsburg GA Posts: 136	Re: How about some pics of 67-72 Trucks I have 72 GMC ffinished enough to post here Attached Images

02-21-2010, 11:59 AM	#19
Crumley Registered User Join Date: Mar 2008 Location: Sharpsburg GA Posts: 136	Re: How about some pics of 67-72 Trucks Yes the shop is mine. It is 40' x 60' (not big enough) in the side yard. Its nice to be able to go out and work on a project and leave everything sitting and turn the lights off and lock the door. Beats the heck out of watching t.v.

02-20-2010, 10:25 AM	#21
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: How about some pics of 67-72 Trucks pic Attached Images

02-20-2010, 10:16 PM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How about some pics of 67-72 Trucks very nice __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 02-20-2010 at 10:16 PM.



Register or Log In To remove these advertisements.

02-20-2010, 10:31 PM	#23
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: How about some pics of 67-72 Trucks Crumley, nice truck! What is your tire/lift combo? I really like that stance. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

02-21-2010, 10:14 AM	#24
Crumley Registered User Join Date: Mar 2008 Location: Sharpsburg GA Posts: 136	Re: How about some pics of 67-72 Trucks Thanks, the truck has a 6" spring lift with 35x12.5x15 tires on stock GM 15x8 rally rims.

02-21-2010, 10:57 AM	#25
Dads 68 GMC Registered User Join Date: Feb 2006 Location: Sidney; MT Posts: 172	Re: How about some pics of 67-72 Trucks looks great!!!! what color blue is that?

Register or Log In To remove these advertisements.