PA WTB: Front rubber cushion - 283 horseshoe mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bhap** · 11-11-2019, 05:52 PM

I have the metal bracket for the front horseshoe mount on a 283 on my 62, but need the rubber cushion and bolt. I'm going from a 235 to a 283 - would the front rubber cushion possibly be the same for both engines? Let me know if you have one or know if they are the same.

Thanks

Bob

**The Rocknrod** · 11-14-2019, 10:30 AM

Like this? - https://www.ebay.com/itm/1960-61-62-...ox!51501!US!-1

**bhap** · 11-14-2019, 12:20 PM

Yes - I have the metal U shaped bracket, just need the rubber bushing / cushion. It might be the same as the one used on the 235 in 62, but I have not been able to confirm.

Thanks

Bob

**The Rocknrod** · 11-14-2019, 01:36 PM

You could get one maybe at Aspen C10 Parts in Arizona - https://www.aspenautoaz.com/60-66-ch...uck-parts.html
If it's in bad condition you could have it re-vulcanized.
I thought Jim Carter would have them but they arent listed - http://www.oldchevytrucks.com/cart/i...0motor%20mount
Probably be easier to change to the next series mounts.

11-11-2019, 05:52 PM	#1
bhap Senior Member Join Date: Mar 2006 Location: Pittsburgh, PA Posts: 240	WTB: Front rubber cushion - 283 horseshoe mount I have the metal bracket for the front horseshoe mount on a 283 on my 62, but need the rubber cushion and bolt. I'm going from a 235 to a 283 - would the front rubber cushion possibly be the same for both engines? Let me know if you have one or know if they are the same. Thanks Bob

11-14-2019, 10:30 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: WTB: Front rubber cushion - 283 horseshoe mount Like this? - https://www.ebay.com/itm/1960-61-62-...ox!51501!US!-1 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-14-2019, 12:20 PM	#3
bhap Senior Member Join Date: Mar 2006 Location: Pittsburgh, PA Posts: 240	Re: WTB: Front rubber cushion - 283 horseshoe mount Yes - I have the metal U shaped bracket, just need the rubber bushing / cushion. It might be the same as the one used on the 235 in 62, but I have not been able to confirm. Thanks Bob

11-14-2019, 01:36 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: WTB: Front rubber cushion - 283 horseshoe mount You could get one maybe at Aspen C10 Parts in Arizona - https://www.aspenautoaz.com/60-66-ch...uck-parts.html If it's in bad condition you could have it re-vulcanized. I thought Jim Carter would have them but they arent listed - http://www.oldchevytrucks.com/cart/i...0motor%20mount Probably be easier to change to the next series mounts. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.