looking for a small block fan shroud - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krazy_texan · 03-24-2004, 03:04 AM

just what the title says i need a fan shroud for my 350 and they are kinda pricey for my taste, i am willing to trade parts for one as i have very little money to spend on truck parts, also does it the shroud have to be specific to our trucks or can you get one off something else

Tx Firefighter · 03-24-2004, 11:46 AM

Go see Barry at Bruce Lowrie Chevrolet in Ft Worth. A new one is about 60 bucks.

*Shane* · 03-24-2004, 12:58 PM

I have a new small block shroud that I would be willing to part with ... you can have it for the same money I gave for it.

$75 plus shipping.

I will post some pics if you are interested ... it's not here at home, but about 15 miles away at "the shop." I can make a trip for pics, if i know that it's something that may be of interest to ya.

DennyB · 03-24-2004, 07:08 PM

Does the shroud your looking for have to be perfect?
I have one that has a crack in it. I dont remember exactly where its damaged but I could drag it out and snap a pic of it if you like.
From what I remember it is very useable.

krazy_texan · 03-24-2004, 10:03 PM

as long as the mounting holes are not ripped out i am good, i dont care if it has a crack in it

DennyB · 03-24-2004, 10:30 PM

I'll see if I can dig it out in the dark when I get home.
I'll be leaving shortly and have a stop to make on the way.
Then get my pc working and I should be able to post a pic.

DennyB · 03-25-2004, 12:31 AM

here are the pics of the shroud.
these are the only things I can find wrong with it.
Scuff mark on top left. probably from a hose...

DennyB · 03-25-2004, 12:33 AM

Tle little tab on the bottom left is barely hanging. I dont know if this even has a purpose?....

DennyB · 03-25-2004, 12:35 AM

here are the rest of the pics....
The upper support brackets are there if you want them
I'll take $25 plus shipping if you want it.

DennyB · 03-25-2004, 12:36 AM

@

DennyB · 03-25-2004, 12:37 AM

#

DennyB · 03-25-2004, 12:41 AM

This is from a 69 with a 350 SB.
I think it fits any 67-72 with a SBC

DennyB · 03-25-2004, 06:27 PM

krazy_texan,
If you dont want it let me know.
I might as well ebay it since I dug it out

krazy_texan · 03-25-2004, 11:51 PM

figure out shipping and send me a pm with a mailing address i will send the money monday when i get payed

Chevyguy111786 · 03-26-2004, 02:11 AM

krazy texan...if that don't work out. i got 2 you can pick from and i got your heater box too if your interested....if you want to meet me in greenville or i can even take it off and bring it back to garland...whichever is easier for you..i'll be goin out there this weekend

DennyB · 03-26-2004, 10:59 AM

krazy texan,
If its easier for you to get Chevyguy's parts thats no problem with me.
I will box it and get it weighed for shipping in case you still want it.

Denny

my57210 · 03-26-2004, 12:33 PM

Sent you a PM

03-24-2004, 03:04 AM	#1
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	looking for a small block fan shroud just what the title says i need a fan shroud for my 350 and they are kinda pricey for my taste, i am willing to trade parts for one as i have very little money to spend on truck parts, also does it the shroud have to be specific to our trucks or can you get one off something else __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

03-24-2004, 11:46 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Go see Barry at Bruce Lowrie Chevrolet in Ft Worth. A new one is about 60 bucks. __________________ I'm on the Instagram- @Gearhead_Kevin

03-24-2004, 07:08 PM	#4
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Does the shroud your looking for have to be perfect? I have one that has a crack in it. I dont remember exactly where its damaged but I could drag it out and snap a pic of it if you like. From what I remember it is very useable. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-24-2004, 10:03 PM	#5
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	as long as the mounting holes are not ripped out i am good, i dont care if it has a crack in it __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

03-24-2004, 10:30 PM	#6
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	I'll see if I can dig it out in the dark when I get home. I'll be leaving shortly and have a stop to make on the way. Then get my pc working and I should be able to post a pic. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-24-2004, 12:58 PM	#3
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	I have a new small block shroud that I would be willing to part with ... you can have it for the same money I gave for it. $75 plus shipping. I will post some pics if you are interested ... it's not here at home, but about 15 miles away at "the shop." I can make a trip for pics, if i know that it's something that may be of interest to ya.

03-25-2004, 12:31 AM	#7
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	here are the pics of the shroud. these are the only things I can find wrong with it. Scuff mark on top left. probably from a hose... Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 12:33 AM	#8
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Tle little tab on the bottom left is barely hanging. I dont know if this even has a purpose?.... Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 12:35 AM	#9
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	here are the rest of the pics.... The upper support brackets are there if you want them I'll take $25 plus shipping if you want it. Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 12:36 AM	#10
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	@ Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 12:37 AM	#11
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	# Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 12:41 AM	#12
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	This is from a 69 with a 350 SB. I think it fits any 67-72 with a SBC Attached Images __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 06:27 PM	#13
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	krazy_texan, If you dont want it let me know. I might as well ebay it since I dug it out __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-25-2004, 11:51 PM	#14
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	figure out shipping and send me a pm with a mailing address i will send the money monday when i get payed __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

03-26-2004, 02:11 AM	#15
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	krazy texan...if that don't work out. i got 2 you can pick from and i got your heater box too if your interested....if you want to meet me in greenville or i can even take it off and bring it back to garland...whichever is easier for you..i'll be goin out there this weekend



Register or Log In To remove these advertisements.

03-26-2004, 10:59 AM	#16
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	krazy texan, If its easier for you to get Chevyguy's parts thats no problem with me. I will box it and get it weighed for shipping in case you still want it. Denny __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

03-26-2004, 12:33 PM	#17
my57210 Registered User Join Date: Oct 2003 Location: Collinsville, OK Posts: 33	Chevyguy111786 Sent you a PM __________________ 1948 Chevy 3100 1931 Slant Window Ford 1947 Chevy Coupe 1966 VW Bug

Register or Log In To remove these advertisements.