The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-19-2018, 03:23 PM   #1
Akleypas
Registered User
 
Join Date: Jul 2018
Location: Hockley Tx
Posts: 59
Cam Swap on a ls 6.0

Hello, I am dropping a L96 6.0 in my 71 c10. I'm looking to change out my cam shaft. Ive looked in to comp cams and Texas speed and performance cams. I don't know enough about cams to know which is best for my application. I'm looking to bump my HP to around 500. I plan to change my intake, cam, headers, and tune the computer. Also, I'm running a 6 speed manual so I don't want anything too radical to where its not fun to cruise in. Let me know what y'all are running!
Akleypas is offline   Reply With Quote
Old 12-19-2018, 04:28 PM   #2
skyphix
Registered User
 
Join Date: Sep 2018
Location: Brooklin, ME
Posts: 314
Re: Cam Swap on a ls 6.0

Check this out
https://www.hotrod.com/articles/new-...-low-end-loss/

Richard Holdener is one of the kings of how to make power with an LS - I asked a similar question of him for my 5.3 and he said "600 lift, 230ish duration" - which would get me around 400-425hp with a good tune. That cam should be a lot less aggressive in a 6.0 vs my 5.3. The article above, though, outlines a specific cam where he got close to 500hp at the crank. Granted, he's running no accessories, straight out the headers, but it should be a decent guide for you.
__________________
Eric
1980 C10 SWB
skyphix is offline   Reply With Quote
Old 12-19-2018, 04:34 PM   #3
88Stanger
Registered User
 
Join Date: Mar 2015
Location: Washington State
Posts: 710
Re: Cam Swap on a ls 6.0

I have a 5.3 with Flattop Pistons that i rebuilt and not to stock. I have a Holley intake, heads were mildly worked over, cable drive 92mm throttle body, headers, 4L60e, 3:42 posi, got rid of MAF and converted over to Speed Density, Cam kit is from WS6Store - Hot Cam Kit. Great piece. I will tell you though, depending on the Cam you do with and how your motor runs, if you have Power Brakes with Booster, you may have booster issues. Ask me how i know. I now have full Wilwood disc brake kit - everything and it is not cheap but damn they work now. Anyways, i like the cam, sounds healthy, got a good lope to it, but as mentioned it will reduce your at idle vacuum.
88Stanger is offline   Reply With Quote
Old 12-19-2018, 10:03 PM   #4
Tork?
Senior Member
 
Join Date: May 2013
Location: Chicago, IL
Posts: 206
Re: Cam Swap on a ls 6.0

500whp or at the crank? 500 at the wheels is going to require head work, ported intake, and a pretty radical cam. Lucky for you the l96 has basically LS3 heads so that’s a bonus. And the manual trans will help tolerate a bigger cam. If you’re iso 500 engine that’s totally doable. Check Brian Tooley Racing aka BTR the stage 3 LS3 cam should get you there. A friend's ‘14 LS3 did 480whp on the stage 4 with headers.

I’m in similar boat as you I have a stock LS3 on a stand tossing around cam choices for 3 months. These big cube gen IV can lose low end torque in search of higher hp. Imo it looks like a decent 22x/23x cam with low 600 lift is the sweet spot to get both with 440-460wheel, driveability, tolerance and not blowing budget on cnc heads or intake porting.
Tork? is offline   Reply With Quote
Old 12-19-2018, 11:13 PM   #5
mongocanfly
Post Whore
 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 11,032
Re: Cam Swap on a ls 6.0

I'd call Brian tooley...tell then what your looking for and let them recommend one for you....i got mine from btr and it had comp cams on the box
__________________
Mongo...aka Greg

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2013 GMC Z71..daily driver

Last edited by mongocanfly; 12-19-2018 at 11:43 PM.
mongocanfly is offline   Reply With Quote
Reply

Bookmarks

Tags
cam swap, cam upgrade, engine and performance, l96, ls 6.0

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com