The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-02-2020, 08:38 PM   #1
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Are all these early trucks noisy going down the road?

Got the new clutch installed, went with a 12”. Everything bolted up just fine, trans slid right into place. Took it for a drive and it drives better than before but it still sounds like a Pettibone crane driving down the road. Damn, are all these trucks this loud? I know the clutch isn’t making noise, just seems like the trans or driveshaft is noisy.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-02-2020, 09:25 PM   #2
oem4me
Registered User
 
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
Re: Are all these early trucks noisy going down the road?

4 speed? Yes, noisy. Sounds like a concrete mixer to me. Straight through fourth gear 1:1 is quiet.

Last edited by oem4me; 12-02-2020 at 09:32 PM.
oem4me is offline   Reply With Quote
Old 12-02-2020, 10:24 PM   #3
66x3
Registered User
 
Join Date: Dec 2018
Location: Bellevue, MI
Posts: 118
Re: Are all these early trucks noisy going down the road?

Makes me think of riding the school bus when I was a kid
66x3 is offline   Reply With Quote
Old 12-02-2020, 10:52 PM   #4
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Are all these early trucks noisy going down the road?

Yes these old trucks are noisy, especially a C20 with the Eaton HO52/72. They just are not going to be quiet in stock form.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-02-2020, 11:29 PM   #5
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Are all these early trucks noisy going down the road?

What have you got for floor covering at this point?
AcampoDave is offline   Reply With Quote
Old 12-02-2020, 11:47 PM   #6
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by AcampoDave View Post
What have you got for floor covering at this point?
Nothing yet; when I drove it today, the trans cover was still off.

I know where you’re going, floor insulation and a mat.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-03-2020, 12:21 AM   #7
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Are all these early trucks noisy going down the road?

Fer sher, and my truck was noisy as all get out without the floor too. Incredibly so, actually.
AcampoDave is offline   Reply With Quote
Old 12-03-2020, 12:32 AM   #8
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by AcampoDave View Post
Fer sher, and my truck was noisy as all get out without the floor too. Incredibly so, actually.
There’s a few different types of sound deadened. What do you guys recommend for a 63? The pre-cut?

I’ll probably just do a rubber floor mat.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-03-2020, 01:23 AM   #9
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Are all these early trucks noisy going down the road?

For the deadener, I used Kilmat and went over it with Noico Red 315 mil closed cell foam as documented by me in this thread. https://67-72chevytrucks.com/vboard/...d.php?t=814233
AcampoDave is offline   Reply With Quote
Old 12-03-2020, 02:23 AM   #10
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by AcampoDave View Post
For the deadener, I used Kilmat and went over it with Noico Red 315 mil closed cell foam as documented by me in this thread. https://67-72chevytrucks.com/vboard/...d.php?t=814233
Thanks for the tip. 20 sq ft for $49.00, that’s not bad.
That should cover the floor, right?
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-03-2020, 02:38 AM   #11
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Are all these early trucks noisy going down the road?

Yeah, but dont overlook the benefits of using the butyl based deadener strips on the large flat parts first. Especially the outer door skins and the tranny hump. (I didn't put closed cell foam in the doors though because water gets in there, but the butyl sure did make them a whole lot less tinny.) I saw a deal on the web where a guy uses a cymbal. He didn't need to cover the whole thing with butyl to stop it from resonating...just 30 to 70 percent coverage kept it from droning on. Butyl stops the resonance and closed cell foam absorbs the noise and insulates too.
AcampoDave is offline   Reply With Quote
Old 12-03-2020, 04:18 AM   #12
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by AcampoDave View Post
Yeah, but dont overlook the benefits of using the butyl based deadener strips on the large flat parts first. Especially the outer door skins and the tranny hump. (I didn't put closed cell foam in the doors though because water gets in there, but the butyl sure did make them a whole lot less tinny.) I saw a deal on the web where a guy uses a cymbal. He didn't need to cover the whole thing with butyl to stop it from resonating...just 30 to 70 percent coverage kept it from droning on. Butyl stops the resonance and closed cell foam absorbs the noise and insulates too.
So, you’re saying to install the butyl material on the trans cover first, then install the closed cell foam on top of that?
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-03-2020, 11:06 AM   #13
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Are all these early trucks noisy going down the road?

Yes, the first layer is deadener. I covered around 70 percent of the entire floor using strips and strategically placed squares and patches. Some folks go with less, some folks cover everything.
The next layer for me was closed cell foam.
After that, I put jute pad and carpet which has an option called "mass backed" which means the underside of it is really heavy on the plastic material that binds the fibers. They say that helps to further deaden sound. Edit: and open holes in the firewall transmit a huge amound of noise.
I made sure to fix evey one of those too.

Last edited by AcampoDave; 12-03-2020 at 11:13 AM.
AcampoDave is offline   Reply With Quote
Old 12-03-2020, 12:26 PM   #14
oem4me
Registered User
 
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by Asshat View Post
Got the new clutch installed, went with a 12”. Everything bolted up just fine, trans slid right into place. Took it for a drive and it drives better than before but it still sounds like a Pettibone crane driving down the road. Damn, are all these trucks this loud? I know the clutch isn’t making noise, just seems like the trans or driveshaft is noisy.
When I first responded to your initial question, i kinda assumed you were talking about transmission noise, from the actual trans (SM420 4 spd). Regular road noise is not something that's ever bothered me. In fact, my three speed column shift truck and others with automatics are not that bad in my view. Sure these trucks are way louder than your average modern aero travel capsule that we all enjoy these days, but I rather like the "total experience" of a vintage vehicle. All my trucks are bone stock with the factory rubber mat and no insulation other than the factory installed felt and thin foam pad underneath the mat.
I honestly think heavily insulating the truck would detract from the whole thing, but maybe that's just me.
oem4me is offline   Reply With Quote
Old 12-03-2020, 01:14 PM   #15
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by oem4me View Post
When I first responded to your initial question, i kinda assumed you were talking about transmission noise, from the actual trans (SM420 4 spd). Regular road noise is not something that's ever bothered me. In fact, my three speed column shift truck and others with automatics are not that bad in my view. Sure these trucks are way louder than your average modern aero travel capsule that we all enjoy these days, but I rather like the "total experience" of a vintage vehicle. All my trucks are bone stock with the factory rubber mat and no insulation other than the factory installed felt and thin foam pad underneath the mat.
I honestly think heavily insulating the truck would detract from the whole thing, but maybe that's just me.
I get what you're saying; the noise I hear has to be from the trans, mostly. I have not got it up to speed to really hear road noise.

And, I don't mind the experience of driving an old truck, I have just never had a truck this old before.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-03-2020, 01:17 PM   #16
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by AcampoDave View Post
Yes, the first layer is deadener. I covered around 70 percent of the entire floor using strips and strategically placed squares and patches. Some folks go with less, some folks cover everything.
The next layer for me was closed cell foam.
After that, I put jute pad and carpet which has an option called "mass backed" which means the underside of it is really heavy on the plastic material that binds the fibers. They say that helps to further deaden sound. Edit: and open holes in the firewall transmit a huge amound of noise.
I made sure to fix evey one of those too.
There are a few options from the Truck Shop for sound deadening. Which one do you recommend?

Are all these held in place with spray adhesive?
Attached Images
   
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-03-2020, 07:41 PM   #17
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Are all these early trucks noisy going down the road?

I'm not sure what to recommend , I only have experience with the products I mentioned. I do think however that in the case of going with the bare essentials, I would go with the two sided version of the product on the left. I did use something very similar myself as my last layer before the carpet and didn't have to use any adhesive. I also agree with what OEM4me says as long as I'm not driving for more than an hour at a stretch. But I love a long drive in my old truck and my hearing is not what it used to be so I do tend to go to greater lengths to conserve what I still got.

Last edited by AcampoDave; 12-03-2020 at 08:04 PM.
AcampoDave is offline   Reply With Quote
Old 12-04-2020, 12:53 AM   #18
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: Are all these early trucks noisy going down the road?

Turn up the volume on the 6x9 Triaxial speakers.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 12-05-2020, 11:02 AM   #19
leadsledray
Registered User
 
Join Date: Mar 2010
Location: colorado springs
Posts: 4
Re: Are all these early trucks noisy going down the road?

sound dampening everywhere you can. i put some inside the door panels, back cab wall. i also made a headliner out of masonite and sandwiched a piece of jute between that and the metal roof skin to help with noise and heat from the sun.
leadsledray is offline   Reply With Quote
Old 12-05-2020, 03:53 PM   #20
panel fan
Registered User
 
Join Date: Nov 2015
Location: Whitby Ontario Canada
Posts: 12
Re: Are all these early trucks noisy going down the road?

Could be rear end ,if noisy it could resonate right up the drive shaft . I've had a few different 3rd members of different ratios in mine with different noises at different times like accelerating , or off throttle . I finally found the ratio that works best for me that was fairly quite but had a slight lash when going between on and off the gas so I had a shop go over the rear end who adjusted the lash , and now the thing screams like a banshee when accelerating . I'm told the gears have to wear back in , but after 6,000 miles it still screams so I will replace it over the winter.
My truck is a one ton panel and I can hear every little noise from the back so a quieter rear end is a must . My trans. is a t5 which has been there through all the rear ends and is fairly quite .

John
panel fan is offline   Reply With Quote
Old 12-07-2020, 12:56 AM   #21
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Ok - I had a friend drive the truck; stuck my head out the window and the noise was obviously coming from the rear end. He also did the same and agrees.
Also, standing outside the truck, as he pulls away or drives by it is pretty obvious more noise is coming from the rear of the truck.

My question, would this likely be worn bearings? Do you guys think replacing the drum/wheel bearings remedy this problem?
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-07-2020, 10:09 AM   #22
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,019
Re: Are all these early trucks noisy going down the road?

If you are not leaking lube from the wheel bearings into the drums, they are probably OK. Can you post up a video with the noise?
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 12-07-2020, 01:39 PM   #23
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,259
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by Steeveedee View Post
If you are not leaking lube from the wheel bearings into the drums, they are probably OK. Can you post up a video with the noise?
Really?

Unfortunately I did not take video.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 12-07-2020, 04:56 PM   #24
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,019
Re: Are all these early trucks noisy going down the road?

Quote:
Originally Posted by Asshat View Post
Really?

Unfortunately I did not take video.
Just take it for a spin with someone else holding the phone. You don't need a video. Maybe just fire the phone up and lay it on the seat? Maybe that will work. Wheel bearings usually start leaking oil due to wear and the seal not touching the axle on part of its diameter. You will usually see a leak before you hear a (rear) wheel bearing, in my experience.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com