MI 72 K5 Body n Frame Cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 08-25-2019, 09:16 AM

Firewall windshield frame - fair condition, non AC $400

Drivers side b-piller also ava with firewall, $600....

Misc body and frame cuts quoted as needed, LMK needs....

**DeadheadNM** · 08-25-2019, 09:50 AM

Any available brake fuel line clamps clips, ground straps, and harness clips?

**Madkidd007** · 08-25-2019, 10:32 PM

How about the passenger bedside taillight cut like the driver side I have? And also 1 rear shock bracket?

**aotte1** · 08-27-2019, 01:35 AM

I will take firewall windshield frame as pictured, pending more pictures showing condition, especially windshield frame; and shipping by Fastenal ( I pay Fastenal).

Les

**aotte1** · 08-27-2019, 09:36 AM

Also interested in gas tank and sending unit wire, pending close up picture on tank inlet pipe.

Les

**aotte1** · 08-27-2019, 02:32 PM

I am going to pass at this time on above parts.

Thanks,
Les

Oldswrench · 09-25-2019, 07:24 PM

I need one of these please

Paul72 · 09-27-2019, 01:10 PM

what would shipping be on the firewall/windshield frame to 50701?

I haven't ventured into the large part market yet...

Thanks!

Paul

**72blzrWA** · 09-27-2019, 04:35 PM

I need Drivers quarter if decent shape specifically these sections. Also Passenger side right behind door in same place driver's side photo if it's good condition.

Thanks, Mike

Toofast427 · 09-27-2019, 05:04 PM

would be interested in front 6" of passanger front frame horn, driver side rear tail light cutout to marker light area (top seal area condition unimportant) and the fuel tank inlet if you want to cut it off.
Thanks David

C.I.Blazer · 09-28-2019, 02:57 PM

Is the rear cross member available?

**DaHos** · 09-29-2019, 09:35 AM

Quote:

Originally Posted by Paul72

what would shipping be on the firewall/windshield frame to 50701?

I haven't ventured into the large part market yet...

Thanks!

Paul

Prefer local on this one....

Quote:

Originally Posted by 72blzrWA

I need Drivers quarter if decent shape specifically these sections. Also Passenger side right behind door in same place driver's side photo if it's good condition.

Thanks, Mike

Both areas are junk, sry

Quote:

Originally Posted by Toofast427

would be interested in front 6" of passanger front frame horn, driver side rear tail light cutout to marker light area (top seal area condition unimportant) and the fuel tank inlet if you want to cut it off.
Thanks David

Should be able to salvage them, I will take another look for you.

Quote:

Originally Posted by C.I.Blazer

Is the rear cross member available?

Rotted, sry

Paul72 · 09-29-2019, 01:51 PM

no worries!

thanks,

Paul

**Madkidd007** · 09-29-2019, 04:54 PM

Assuming it got missed because of how long ago it was. A good rear shock bracket?

72blazernut · 10-01-2019, 08:36 AM

How much do you want for the rear frame horns?

Oldswrench · 10-01-2019, 08:45 AM

Do you have one of those triangular shaped pieces at the front of the cab that I sent a picture of? I know it was poor photography...

royr · 10-01-2019, 01:19 PM

I could use a section of cargo bed, 8" by 20", long side is left to right with no holes.

Oldswrench · 10-08-2019, 08:30 AM

Is there any chance that you have one of these, It is the inside fwd cab to fender brace or doubler? I dont know but it is held on by the 2 fwd bolts on the fwd cab mount. I can make one but... Please let me know.
Mark

**Seanext** · 12-08-2019, 08:35 PM

Do you have the power steering box stiffener that sits on the inside of the frame rail? If so shipping to 28034. Should fit in flat rate box.

Ctgry5 · 12-08-2019, 11:59 PM

Do you have additional pics of firewall/windshield frame??

08-25-2019, 09:16 AM	#1
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,853	72 K5 Body n Frame Cuts Firewall windshield frame - fair condition, non AC $400 Drivers side b-piller also ava with firewall, $600.... Misc body and frame cuts quoted as needed, LMK needs.... Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-25-2019, 09:50 AM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,280	Re: 72 K5 Body n Frame Cuts Any available brake fuel line clamps clips, ground straps, and harness clips? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 08-25-2019 at 09:50 AM. Reason: Added

08-25-2019, 10:32 PM	#3
Madkidd007 Senior Member Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,236	Re: 72 K5 Body n Frame Cuts How about the passenger bedside taillight cut like the driver side I have? And also 1 rear shock bracket? Attached Images __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

08-27-2019, 01:35 AM	#4
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 72 K5 Body n Frame Cuts I will take firewall windshield frame as pictured, pending more pictures showing condition, especially windshield frame; and shipping by Fastenal ( I pay Fastenal). Les

08-27-2019, 09:36 AM	#5
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 72 K5 Body n Frame Cuts Also interested in gas tank and sending unit wire, pending close up picture on tank inlet pipe. Les

08-27-2019, 02:32 PM	#6
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 72 K5 Body n Frame Cuts I am going to pass at this time on above parts. Thanks, Les

09-25-2019, 07:24 PM	#7
Oldswrench Registered User Join Date: Dec 2010 Location: Kernersville, NC Posts: 26	Re: 72 K5 Body n Frame Cuts I need one of these please Attached Images

09-27-2019, 01:10 PM	#8
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: 72 K5 Body n Frame Cuts what would shipping be on the firewall/windshield frame to 50701? I haven't ventured into the large part market yet... Thanks! Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

09-27-2019, 04:35 PM	#9
72blzrWA Registered User Join Date: Jul 2018 Location: Spokane Valley, WA Posts: 47	Re: 72 K5 Body n Frame Cuts I need Drivers quarter if decent shape specifically these sections. Also Passenger side right behind door in same place driver's side photo if it's good condition. Thanks, Mike Attached Images

09-27-2019, 05:04 PM	#10
Toofast427 Registered User Join Date: Mar 2017 Location: Houston, TX Posts: 8	Re: 72 K5 Body n Frame Cuts would be interested in front 6" of passanger front frame horn, driver side rear tail light cutout to marker light area (top seal area condition unimportant) and the fuel tank inlet if you want to cut it off. Thanks David

09-28-2019, 02:57 PM	#11
C.I.Blazer Registered User Join Date: Aug 2019 Location: WA State Posts: 186	Re: 72 K5 Body n Frame Cuts Is the rear cross member available?

09-29-2019, 01:51 PM	#13
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: 72 K5 Body n Frame Cuts no worries! thanks, Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

09-29-2019, 04:54 PM	#14
Madkidd007 Senior Member Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,236	Re: 72 K5 Body n Frame Cuts Assuming it got missed because of how long ago it was. A good rear shock bracket? __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

10-01-2019, 08:36 AM	#15
72blazernut Registered User Join Date: Jun 2019 Location: Las Vegas Posts: 26	Re: 72 K5 Body n Frame Cuts How much do you want for the rear frame horns?

10-01-2019, 08:45 AM	#16
Oldswrench Registered User Join Date: Dec 2010 Location: Kernersville, NC Posts: 26	Re: 72 K5 Body n Frame Cuts Do you have one of those triangular shaped pieces at the front of the cab that I sent a picture of? I know it was poor photography...



Register or Log In To remove these advertisements.

10-01-2019, 01:19 PM	#17
royr Registered User Join Date: Aug 2019 Location: ARVADA, CO Posts: 80	Re: 72 K5 Body n Frame Cuts I could use a section of cargo bed, 8" by 20", long side is left to right with no holes.

10-08-2019, 08:30 AM	#18
Oldswrench Registered User Join Date: Dec 2010 Location: Kernersville, NC Posts: 26	Re: 72 K5 Body n Frame Cuts Is there any chance that you have one of these, It is the inside fwd cab to fender brace or doubler? I dont know but it is held on by the 2 fwd bolts on the fwd cab mount. I can make one but... Please let me know. Mark Attached Images

12-08-2019, 08:35 PM	#19
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 586	Re: 72 K5 Body n Frame Cuts Do you have the power steering box stiffener that sits on the inside of the frame rail? If so shipping to 28034. Should fit in flat rate box.

12-08-2019, 11:59 PM	#20
Ctgry5 Registered User Join Date: Jun 2013 Location: Homestead, Florida Posts: 60	Re: 72 K5 Body n Frame Cuts Do you have additional pics of firewall/windshield frame??

Register or Log In To remove these advertisements.