The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Tools, Shops and Shop Safety

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-13-2014, 05:40 PM   #1
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,029
2 part shop/garage question.

Hey guys. I hate being the guy asking "how much" but, I have been getting quotes all over the place on having a garage built behind my house. I don't really know any contractors so, I'm hoping someone can give me a rough estimate of what seems fair. I'm looking to build an oversize 2 car or 3 car garage. Very basic garage with electrical, no plumbing and roll up garage doors. I will also need the concrete slab laid down with a small driveway in front. I've gotten quotes from $15,000-$35,000 so you can see why I'm a bit confused on why there is such a price difference between contractors. I've attached a couple of pictures of the two styles I'm contemplating. I live on a 12,000 square foot lot so, I don't have too much room to play with and the only access to the back is an RV style access. Also, I'm in Washington State so, If anyone can recommend someone please let me know.
Attached Images
  
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 07-14-2014, 04:01 PM   #2
motornut
78K & 79C Jimmys
 
motornut's Avatar
 
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
Re: 2 part shop/garage question.

those numbers are not far off.
I was looking to buy a house without a garage and build it...
cost of permits,time,and what your able to do yourself,add up quick.
__________________
John
1978 GMCJimmy4X4-350/203
1979 GMCJimmy4X2-305/350
motornut is offline   Reply With Quote
Old 07-29-2014, 02:46 AM   #3
Freddo
Registered User
 
Join Date: Jun 2013
Location: Richland, WA
Posts: 85
Re: 2 part shop/garage question.

I also live in Washington & have found a good sized variation in costs which
ranged from $30 to $40 per square foot & of course, you can spend more:
For example. 2x4 or 2x6 framing? (We see both on garages), T-111 sheet siding
or lap? If lap, is it a composite wood pulp & resin style or a more expensive 'concrete' board lap. Are the soffits enclosed or left open? Windows? Garage door insulated or not insulated? Electrical: running a 60 amp sub panel or a 200 amp panel?
All these choices can make a big difference in overall cost. Best to do some research on what you want & when you get firm estimates, know what the contractor plans to use. A 500 sq ft garage could easily have a $10,000 spread in cost depending on materials alone.
Freddo is offline   Reply With Quote
Old 07-30-2014, 05:54 PM   #4
NONHOG
Registered User
 
NONHOG's Avatar
 
Join Date: Feb 2007
Location: Marana, Arizona
Posts: 3,416
Re: 2 part shop/garage question.

I spent way too much and won't bother with saying who built it. Needless to say looking back. I would have found a way to do the parts I was comfortable doing. I'd have a better/nicer shop. But it is what it is.
Don't get in a hurry! Keep searching and if your anywhere near Tacoma PM me I have one guy who might be able to help. He is reasonable in price.
Heck of a nice guy too.
__________________
"I feel the need for speed!"... as soon as I am done with my nap.
NONHOG is offline   Reply With Quote
Old 08-04-2014, 03:49 PM   #5
cg285
Registered User
 
Join Date: Aug 2013
Location: sumterville, florida
Posts: 914
Re: 2 part shop/garage question.

it all depends upon the time, the location and the local building codes. my 24*34 carport cost almost 50k back in the building frenzy of 2007 and i did the roof, electrical and paint. lucky for me they appraised it at 14k for taxes
cg285 is offline   Reply With Quote
Old 08-27-2014, 11:47 PM   #6
GVDobler
Registered User
 
GVDobler's Avatar
 
Join Date: May 2012
Location: Las Vegas NV
Posts: 122
Re: 2 part shop/garage question.

If you have a contractor do a turn-key it will be way more than subbing it out yourself. Some people don't want the hassle.

Once you get a plan you like ask around at the place where you would buy materials. There are people that post ads for concrete, framing, roofing etc. I always pay for the material myself, to avoid a lien because a contractor didn't pay for the stuff delivered to your property.

Good luck.
__________________
Jon S
1966 GMC Suburban 305 V6
Las Vegas NV
GVDobler is offline   Reply With Quote
Old 08-28-2014, 12:02 AM   #7
69chevytrucker
Registered User
 
69chevytrucker's Avatar
 
Join Date: Apr 2014
Location: calgary alberta
Posts: 1,248
Re: 2 part shop/garage question.

30 is about right 15 the guy dont know what he is doing here is a good way to look at it
pad low $5000 high end $8000 builder garage package low $3500 high $5500 elc $1500 to $2000
labour 3x the cost of material add it up you will get pretty close to 30 grand all said and done
69chevytrucker is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com