What did you get done? 3/18/07 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 03-18-2007, 07:20 PM

I didnt even look at the 71 4x4.Rising scrap prices bought me out and I started cutting up all the parts trucks I have after saving the good parts.This week the parts trucks are being taken to the scrapyard.What about the rest of y'all?

Longhorn Man · 03-18-2007, 07:26 PM

tried to get the temp motor (425) in... didn't go so well. Now I'm pimpin in a shop truck... old 300,000 mile F-one-fix-me.

ChevyFan24 · 03-18-2007, 08:01 PM

Cleaned up the garage a little, got the parts I wanted to keep off of my parts truck, and started installing my stainless brake lines.

Piece of Work · 03-18-2007, 08:09 PM

Didn't do any work on the truck, But I bought a new 4HP 60 Gal. compressor, D/A, and gravity feed spray gun. Should be starting the body work next week. Oh, and a new lawn mower - had to cut the grass.

williamt · 03-18-2007, 08:17 PM

Well thanks to the faqs on this site I rebuilt my first holley 4 barrel thank you then rounded up a eldebrock performer intake and put it all togther . thanks for all the vauble info.

Sonny · 03-18-2007, 08:20 PM

Daughter's B-day (5); she's a St. Patrick's Day girl so we celebrated. No work this weekend.

RedZ71 · 03-18-2007, 08:29 PM

got another garage here at my apts, so 'ol "rusty" dont get any rustier. and changed the fuel filter to one of those whiz-bang glass ones.

*72CSTC5* · 03-18-2007, 08:33 PM

Bought a pair of NOS 72 Texas truck plates. Bought a tailgate from STP 67-72. Nice score of both of them I do say.

herb101 · 03-18-2007, 08:46 PM

I got some vinyl and started to go crazy on custom door panels (not very custom) and such. Started my stereo install to try to cover the POs butchery. Finished nothing thanks to a migrane headache mid-day today.

Herb

Captain Knievel · 03-18-2007, 08:47 PM

What I did: Put in a new distributor cap, ordered stuff to keep UPS in business.
Celebrated oldest daughter's 11th birthday. Here's to yours, too, Sonny!

What Livrat did: Removed my shaved doors and put on my originals that have handles

I tried to pay him off with coffee, doughnuts, the old doors, etc., but he would have none of it. While he was at it he put in my new key cylinder and identified that my 305 came out of a '78 Monte Carlo. Genius!

This board rocks!!

**clay68c10** · 03-18-2007, 08:49 PM

Did some handyman stuff on the house and went to a car show on saturday.
Also filled up old thirsty's tank. I'm up to 10.4 mpg!!!! That's up from 8 with a carb.

centsless · 03-18-2007, 08:50 PM

Played in the house today. Moved a light switch, receptacle and a phone line to a wall that I built today. Started tearing the other wall down.

msgross · 03-18-2007, 08:51 PM

shoveled snow (75 last week and 10-12" Thursday Night!) took kids sledding

picked up my brake calipers/pads and tore apart a Dana44 for parts.

2nd_wnd · 03-18-2007, 08:55 PM

didnt do anything to the 72 chevy, except haul the parts to a storage area.

Got the 72 gmc temp. motor in and up and running, no it's all mine, traded my old daily driver for it.

I will get a thread with pics going tomorrow, it's to dark to take pictures at this time.

I have sisters now.

Betty - 1972 chevy c-10 (future show truck in restoration)
Betsy - 1972 GMC super custom ( daily driver)

Both LWB

jeffspower · 03-18-2007, 08:57 PM

Put new carpet in the '88 and watched my dog have some fun.

northerngmc · 03-18-2007, 09:35 PM

Plowed the driveway again, and dreamed about spring and starting work on the 69 GMC again......

**hevy_chevy67** · 03-18-2007, 09:43 PM

Waxed my truck, and thought to myself how nice it would be driving it.

I hate winter...

JCA1972 · 03-18-2007, 09:44 PM

Went down to the Houston Raceway and watched the filming of Pinks All out, it was a blast.

cdowns · 03-18-2007, 09:48 PM

well i spent alot of time and gas this whole weekend lookin at trucks and cars for sale// lots of overpriced hacked up crap and i've still got an empty garage

Shyguy · 03-18-2007, 09:50 PM

Didn't do anythng on the 71 this weekend.

My son stopped by today and we talked about old trucks for a while.

Went over to my brother's and helped him install brake pads, a new axle seal on the front differential and bleed the front brakes on his 98 Chevy 4X4.

Other than that I was getting stuff together for our trip down to Fort Smith, Arkansas next weekend to visit some friend.

Danny SEMO

kxnomore · 03-18-2007, 10:32 PM

Quote:

Originally Posted by northerngmc

Plowed the driveway again, and dreamed about spring and starting work on the 69 GMC again......

Spent the weekend in shorts and flip flops. 80 degrees, light breeze, had to put on a shirt after 8 pm though. Gotta love CA weather!

But I did sell my parts truck and started sanding my new to me bed. Now I just need to find a way to dispose of my old bed...

1LoC10 · 03-18-2007, 10:36 PM

This was actually during the week.. but I changed this

to this

67CHIP72 · 03-18-2007, 10:49 PM

Picked up my powder coated Rally Wheels. Polished the trim rings and caps. Got a new set of BFG's and Lug Nuts. Still need to get SS bolts for the caps(last owner painted orange). Then I put a few miles on them.

ThatOneBlue67 · 03-18-2007, 10:51 PM

Wow, I'm sorry for all you snow guys. IT's been nothing but beautiful, 75 degree sunshine here in North California. I got my motor running, which now has aluminum intake and a 700R4. Not finished, but nearly there

724x4a/cchevy · 03-18-2007, 11:07 PM

finally finished my led brake lights!!! and yes i know, i accidentally blew a couple lines in the pass side and one line in the driver's side. This pair set the learning curve

Believe me they are much brighter in person.

03-18-2007, 07:20 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	What did you get done? 3/18/07 I didnt even look at the 71 4x4.Rising scrap prices bought me out and I started cutting up all the parts trucks I have after saving the good parts.This week the parts trucks are being taken to the scrapyard.What about the rest of y'all? Last edited by 1969k10stepside; 03-18-2007 at 07:22 PM.

03-18-2007, 07:26 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: What did you get done? 3/18/07 tried to get the temp motor (425) in... didn't go so well. Now I'm pimpin in a shop truck... old 300,000 mile F-one-fix-me.

03-18-2007, 08:01 PM	#3
ChevyFan24 Junior Member Join Date: Nov 2006 Location: Indiana Posts: 181	Re: What did you get done? 3/18/07 Cleaned up the garage a little, got the parts I wanted to keep off of my parts truck, and started installing my stainless brake lines.

03-18-2007, 08:09 PM	#4
Piece of Work Cultural Infidel Join Date: Jan 2007 Location: Clearwater, FL Posts: 668	Re: What did you get done? 3/18/07 Didn't do any work on the truck, But I bought a new 4HP 60 Gal. compressor, D/A, and gravity feed spray gun. Should be starting the body work next week. Oh, and a new lawn mower - had to cut the grass. __________________ posted via La-Z-Boy -Mark 1972 C-10 Fleetside 350/TH350 PS PB A/C Cab Sadly....Sold 1968 Short Fleet 350/TH400 PS PB Delivered by Fine69 Also sadly Sold! It may be that your whole purpose in life is simply to serve as a warning to others. A man is not complete until he is married -- then he is finished.

03-18-2007, 08:17 PM	#5
williamt 68 just like me Join Date: Feb 2007 Location: canton ga. Posts: 142	Re: What did you get done? 3/18/07 Well thanks to the faqs on this site I rebuilt my first holley 4 barrel thank you then rounded up a eldebrock performer intake and put it all togther . thanks for all the vauble info. __________________ 68 just like me

03-18-2007, 08:20 PM	#6
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	Re: What did you get done? 3/18/07 Daughter's B-day (5); she's a St. Patrick's Day girl so we celebrated. No work this weekend. Attached Images Last edited by Sonny; 03-18-2007 at 08:25 PM.

03-18-2007, 08:29 PM	#7
RedZ71 Junior Member Join Date: Jan 2007 Location: Dallas, TX Posts: 246	Re: What did you get done? 3/18/07 got another garage here at my apts, so 'ol "rusty" dont get any rustier. and changed the fuel filter to one of those whiz-bang glass ones. __________________ Jonathan 2001 ECSB Silverado Z71 1971 LB C10 Custom www.z71silverado.com

03-18-2007, 08:33 PM	#8
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: What did you get done? 3/18/07 Bought a pair of NOS 72 Texas truck plates. Bought a tailgate from STP 67-72. Nice score of both of them I do say.

03-18-2007, 08:46 PM	#9
herb101 Used Register Join Date: May 2005 Location: Live Oak, TX Posts: 379	Re: What did you get done? 3/18/07 I got some vinyl and started to go crazy on custom door panels (not very custom) and such. Started my stereo install to try to cover the POs butchery. Finished nothing thanks to a migrane headache mid-day today. Herb

03-18-2007, 08:47 PM	#10
Captain Knievel Senior Member Join Date: Feb 2007 Location: Seattle, WA Posts: 458	Re: What did you get done? 3/18/07 What I did: Put in a new distributor cap, ordered stuff to keep UPS in business. Celebrated oldest daughter's 11th birthday. Here's to yours, too, Sonny! What Livrat did: Removed my shaved doors and put on my originals that have handles I tried to pay him off with coffee, doughnuts, the old doors, etc., but he would have none of it. While he was at it he put in my new key cylinder and identified that my 305 came out of a '78 Monte Carlo. Genius! This board rocks!! __________________ 1970 C10 Last edited by Captain Knievel; 03-18-2007 at 08:49 PM.

03-18-2007, 08:49 PM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,890	Re: What did you get done? 3/18/07 Did some handyman stuff on the house and went to a car show on saturday. Also filled up old thirsty's tank. I'm up to 10.4 mpg!!!! That's up from 8 with a carb. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 03-18-2007 at 08:51 PM.

03-18-2007, 08:50 PM	#12
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: What did you get done? 3/18/07 Played in the house today. Moved a light switch, receptacle and a phone line to a wall that I built today. Started tearing the other wall down. __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

03-18-2007, 08:51 PM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: What did you get done? 3/18/07 shoveled snow (75 last week and 10-12" Thursday Night!) took kids sledding picked up my brake calipers/pads and tore apart a Dana44 for parts. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-18-2007, 08:55 PM	#14
2nd_wnd Registered User Join Date: Feb 2007 Location: Winston Salem, NC Posts: 310	Re: What did you get done? 3/18/07 didnt do anything to the 72 chevy, except haul the parts to a storage area. Got the 72 gmc temp. motor in and up and running, no it's all mine, traded my old daily driver for it. I will get a thread with pics going tomorrow, it's to dark to take pictures at this time. I have sisters now. Betty - 1972 chevy c-10 (future show truck in restoration) Betsy - 1972 GMC super custom ( daily driver) Both LWB __________________ 72 LWB

03-18-2007, 08:57 PM	#15
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: What did you get done? 3/18/07 Put new carpet in the '88 and watched my dog have some fun. Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car



Register or Log In To remove these advertisements.

03-18-2007, 09:35 PM	#16
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: What did you get done? 3/18/07 Plowed the driveway again, and dreamed about spring and starting work on the 69 GMC again...... Attached Images __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

03-18-2007, 09:43 PM	#17
hevy_chevy67 Registered User Join Date: May 2005 Location: Blackfalds, Alberta Posts: 577	Re: What did you get done? 3/18/07 Waxed my truck, and thought to myself how nice it would be driving it. I hate winter... __________________ 1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e

03-18-2007, 09:44 PM	#18
JCA1972 Registered User Join Date: Dec 2006 Location: Baytown, Texas Posts: 194	Re: What did you get done? 3/18/07 Went down to the Houston Raceway and watched the filming of Pinks All out, it was a blast. __________________ 1971 C-10 2004 Yukon: 1998 Honda Accord 2008 Honda Civic 2004 HD V-Rod http://67-72chevytrucks.com/vboard/s...d.php?t=226458

03-18-2007, 09:48 PM	#19
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: What did you get done? 3/18/07 well i spent alot of time and gas this whole weekend lookin at trucks and cars for sale// lots of overpriced hacked up crap and i've still got an empty garage __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-18-2007, 09:50 PM	#20
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: What did you get done? 3/18/07 Didn't do anythng on the 71 this weekend. My son stopped by today and we talked about old trucks for a while. Went over to my brother's and helped him install brake pads, a new axle seal on the front differential and bleed the front brakes on his 98 Chevy 4X4. Other than that I was getting stuff together for our trip down to Fort Smith, Arkansas next weekend to visit some friend. Danny SEMO

03-18-2007, 10:36 PM	#22
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: What did you get done? 3/18/07 This was actually during the week.. but I changed this to this __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-18-2007, 10:49 PM	#23
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: What did you get done? 3/18/07 Picked up my powder coated Rally Wheels. Polished the trim rings and caps. Got a new set of BFG's and Lug Nuts. Still need to get SS bolts for the caps(last owner painted orange). Then I put a few miles on them. Attached Images __________________ In Search Of

03-18-2007, 10:51 PM	#24
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: What did you get done? 3/18/07 Wow, I'm sorry for all you snow guys. IT's been nothing but beautiful, 75 degree sunshine here in North California. I got my motor running, which now has aluminum intake and a 700R4. Not finished, but nearly there __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968. Last edited by ThatOneBlue67; 03-18-2007 at 10:51 PM.

03-18-2007, 11:07 PM	#25
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: What did you get done? 3/18/07 finally finished my led brake lights!!! and yes i know, i accidentally blew a couple lines in the pass side and one line in the driver's side. This pair set the learning curve Believe me they are much brighter in person. __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor Last edited by 724x4a/cchevy; 03-18-2007 at 11:09 PM.

Register or Log In To remove these advertisements.