68 Small Window?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Possmguts · 03-05-2015, 03:55 PM

Found what is titled a 68 with a small window today. Didnt know they made them past 67. Title matched the vin plate.

Is it possible it was a late 67 that got titled 68... or did they still have the small window as an option in 68?

**68bowtie** · 03-05-2015, 04:20 PM

pictures?

**67 cst swb** · 03-05-2015, 04:33 PM

Look at the frame by the power steering gear box to see if it is dimpled or not.
67 no dimple and 68-72 is dimpled.
see this thread for picture reference:
http://67-72chevytrucks.com/vboard/s...d.php?t=235108

I'm betting it's a 67 with a vin plate changed to a 68. But, who knows I guess?

Possmguts · 03-05-2015, 04:39 PM

Quote:

Originally Posted by 68bowtie

pictures?

This is all I got of that one (first pic) its pretty rough cab and bed wise but the frame looks to be blasted and painted like it was the start of a good project. There are several of them sitting there they guy has been bringing them up from the South. He has cabs, beds, frames, and all sorts of fenders and hoods and tons of other parts for 67 through 72 and beyond.

briscuba · 03-05-2015, 04:47 PM

Yes, some 68s came with small window. Check your VIN#, the year should be about 5 digits in... For example, 7 = 67. They also made some big windows for 67, kinda rare but cool.

Possmguts · 03-05-2015, 04:50 PM

Quote:

Originally Posted by briscuba

Yes, some 68s came with small window. Check your VIN#, the year should be about 5 digits in... For example, 7 = 67. They also made some big windows for 67, kinda rare but cool.

Im not buying it, I just ran across this guy with several c10s and lots of parts down the road from me. Not sure on the rules but I can point some of you in his direction if interested. Hes not a member here but I did tell him he needs to look into it to sell on here.

**too much stuff** · 03-05-2015, 04:57 PM

Quote:

Originally Posted by Possmguts

Found what is titled a 68 with a small window today. Didnt know they made them past 67. Title matched the vin plate.

Is it possible it was a late 67 that got titled 68... or did they still have the small window as an option in 68?

No small windows in 68 unless it was a C-40 or bigger truck.

**67 cst swb** · 03-05-2015, 04:58 PM

Quote:

Originally Posted by Possmguts

Im not buying it, I just ran across this guy with several c10s and lots of parts down the road from me. Not sure on the rules but I can point some of you in his direction if interested. Hes not a member here but I did tell him he needs to look into it to sell on here.

Did he have a 68-70 centerlink?

Possmguts · 03-05-2015, 05:00 PM

Quote:

Originally Posted by 67 cst swb

Did he have a 68-70 centerlink?

yeah, but i had already sent the money to a member here with a 69. Hes pulling it this weekend and sending it out Monday

hugger6933 · 03-05-2015, 06:17 PM

I remember seeing a small back glass 68 ad for one and in the ad the guy said yes there was small windowed back glass 68 trucks. He said that all could view the title to see for them selves. He was selling parts off of it if I recall. He was a parts dealer type guy. Jim

Oldblue68chevy · 03-05-2015, 07:31 PM

I think I just drove by there last weekend. Is he reasonable with his prices? I didnt have time to stop and check them out.

Possmguts · 03-05-2015, 07:36 PM

Quote:

Originally Posted by Oldblue68chevy

I think I just drove by there last weekend. Is he reasonable with his prices? I didnt have time to stop and check them out.

I only spoke with him on the phone for a few minutes and he had told me where everything was. There was no one there when I stopped in so I havnt even taked about pricing yet because I didnt get to see anything in the shop. Just saw the trucks out side. Ill be talking to him again about some body stuff soon though. He has 2 ads on Y-town CL with his number. But he does seem like a nice guy. Hes in GA right now.

Oldblue68chevy · 03-05-2015, 07:48 PM

Im wondering if its the same guy i bought my truck off of. He was in from the same area. If it is he has a few nicely restored trucks and suburbans.

Sean1985 · 03-05-2015, 09:08 PM

I have a "titled 68" with a small window. Frame and vin plate and protection plate all match. Protecto plate book says 68. But what I've heard is that they title them 68 if they were sold in that year. Everything that I have found is the small window was only offered in 67.

**special-K** · 03-05-2015, 09:18 PM

Back to the small window '68 discussion that was started and fizzled out, did you check your VIN to see if it is in fact a '68? Yes, in '67 there were both small and large rear windows...just like years before. The large back window was an option and many trucks came through with them. I have heard tell of '68s existing with small back window, but I would need bonafide proof. I have seen vehicles titled (improperly) as the year they were sold in and not the year of manufacture. Is the fifth digit a 7 or an 8?

Possmguts · 03-05-2015, 09:26 PM

Quote:

Originally Posted by special-K

Back to the small window '68 discussion that was started and fizzled out, did you check your VIN to see if it is in fact a '68? Yes, in '67 there were both small and large rear windows...just like years before. The large back window was an option and many trucks came through with them. I have heard tell of '68s existing with small back window, but I would need bonafide proof. I have seen vehicles titled (improperly) as the year they were sold in and not the year of manufacture. Is the fifth digit a 7 or an 8?

Well I didnt buy this truck. Its just sitting with several others I was looking at. The guy wasnt there for me to be able to look at the title and I didnt think to look at the vin while I was there. But I will be going back and will write down the vin

EARNHARDT#3 · 03-05-2015, 09:41 PM

Besides the window there are a dozen or more other things that define a '67. Do these "small window 68's" have fender lights, the different wing windows, door handles, dash bezel, ignition bezel etc.?

Sean1985 · 03-05-2015, 10:20 PM

My "titled 68" small window vin comes back as a 67. Forgot to mention that. But reg and everything else says 68. Frame does not have dimple.

**special-K** · 03-05-2015, 11:05 PM

Quote:

Originally Posted by Possmguts

Well I didnt buy this truck. Its just sitting with several others I was looking at. The guy wasnt there for me to be able to look at the title and I didnt think to look at the vin while I was there. But I will be going back and will write down the vin

sorry, I guess you did say you didn't buy it earlier. I just got distracted and that went over my head. I am now remembering, IIRC, there was a member who had a small window '68. It had the '68 dash. Can anytime else recall that or am I remembering wrong? This comes up every year or so and that was a good many years ago. The best I can say is there may be a freak or two out there, but no, starting in '68 the large back window became the standard window, no small offered (except may a fluke)

Possmguts · 03-06-2015, 04:26 PM

Quote:

Originally Posted by EARNHARDT#3

Besides the window there are a dozen or more other things that define a '67. Do these "small window 68's" have fender lights, the different wing windows, door handles, dash bezel, ignition bezel etc.?

The front clip was off but the bed was still just sitting on the frame.. IF its original it has marker lights and the guy did say the fenders have them too. He does have them but they was in the shop and he wasnt there to show me. As far as the dash goes it was stripped all the way down so I wouldnt know if anything was different there from 67. I am going back though when I can and if there is something in the dash that would tell me 67 or 68 still wouldnt know.
But I will get the vin and see if I can see the title. The frame is perfect and the cab at least was in decent shape with supposed replaced corners and rockers.

*Fitz* · 03-06-2015, 07:46 PM

Quote:

Originally Posted by Possmguts

Found what is titled a 68 with a small window today. Didnt know they made them past 67. Title matched the vin plate.

Is it possible it was a late 67 that got titled 68... or did they still have the small window as an option in 68?

If it has a small window it's a 67.

**special-K** · 03-07-2015, 09:49 AM

Look at the hole for the ignition switch. It is noticeable smaller. If the switch or bezel are still there, they will be noticeably smaller,too. The VIN tells the tale, but verify the dash just the same. If it is a '68 VIN it would be good to know if it's a left over small window that slipped through or a true fluke with '67 cab back panel and newer dash panel all in one

Possmguts · 03-07-2015, 10:29 AM

Quote:

Originally Posted by special-K

Look at the hole for the ignition switch. It is noticeable smaller. If the switch or bezel are still there, they will be noticeably smaller,too. The VIN tells the tale, but verify the dash just the same. If it is a '68 VIN it would be good to know if it's a left over small window that slipped through or a true fluke with '67 cab back panel and newer dash panel all in one

Ill run back over and check that out later today and update.

**special-K** · 03-07-2015, 02:31 PM

Great! It's threads like this that makes this site so much smarter than other sites. we have been sorting this type of stuff out for years so others can come along and benefit. It sure helps when a member goes to buy a truck

**special-K** · 03-08-2015, 11:18 AM

TTT, because curious minds await

03-05-2015, 03:55 PM	#1
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	68 Small Window?? Found what is titled a 68 with a small window today. Didnt know they made them past 67. Title matched the vin plate. Is it possible it was a late 67 that got titled 68... or did they still have the small window as an option in 68? __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

03-05-2015, 04:20 PM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,344	Re: 68 Small Window?? pictures? __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

03-05-2015, 04:47 PM	#5
briscuba Registered User Join Date: Apr 2014 Location: Thousand Oaks, CA Posts: 118	Re: 68 Small Window?? Yes, some 68s came with small window. Check your VIN#, the year should be about 5 digits in... For example, 7 = 67. They also made some big windows for 67, kinda rare but cool. __________________ 1967 C10: My next project 1964 SS Impala Hardtop, low and slow 2007 Harley Street Glide .... When all else fails to start.

03-05-2015, 06:17 PM	#10
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,257	Re: 68 Small Window?? I remember seeing a small back glass 68 ad for one and in the ad the guy said yes there was small windowed back glass 68 trucks. He said that all could view the title to see for them selves. He was selling parts off of it if I recall. He was a parts dealer type guy. Jim

03-05-2015, 07:31 PM	#11
Oldblue68chevy Registered User Join Date: May 2014 Location: Freedom Pa Posts: 139	Re: 68 Small Window?? I think I just drove by there last weekend. Is he reasonable with his prices? I didnt have time to stop and check them out.

03-05-2015, 04:33 PM	#3
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 68 Small Window?? Look at the frame by the power steering gear box to see if it is dimpled or not. 67 no dimple and 68-72 is dimpled. see this thread for picture reference: http://67-72chevytrucks.com/vboard/s...d.php?t=235108 I'm betting it's a 67 with a vin plate changed to a 68. But, who knows I guess? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

03-05-2015, 07:48 PM	#13
Oldblue68chevy Registered User Join Date: May 2014 Location: Freedom Pa Posts: 139	Re: 68 Small Window?? Im wondering if its the same guy i bought my truck off of. He was in from the same area. If it is he has a few nicely restored trucks and suburbans.

03-05-2015, 09:08 PM	#14
Sean1985 Registered User Join Date: Dec 2013 Location: Carlsbad Posts: 133	Re: 68 Small Window?? I have a "titled 68" with a small window. Frame and vin plate and protection plate all match. Protecto plate book says 68. But what I've heard is that they title them 68 if they were sold in that year. Everything that I have found is the small window was only offered in 67.

03-05-2015, 09:18 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 68 Small Window?? Back to the small window '68 discussion that was started and fizzled out, did you check your VIN to see if it is in fact a '68? Yes, in '67 there were both small and large rear windows...just like years before. The large back window was an option and many trucks came through with them. I have heard tell of '68s existing with small back window, but I would need bonafide proof. I have seen vehicles titled (improperly) as the year they were sold in and not the year of manufacture. Is the fifth digit a 7 or an 8? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-05-2015, 09:41 PM	#17
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: 68 Small Window?? Besides the window there are a dozen or more other things that define a '67. Do these "small window 68's" have fender lights, the different wing windows, door handles, dash bezel, ignition bezel etc.? __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

03-05-2015, 10:20 PM	#18
Sean1985 Registered User Join Date: Dec 2013 Location: Carlsbad Posts: 133	Re: 68 Small Window?? My "titled 68" small window vin comes back as a 67. Forgot to mention that. But reg and everything else says 68. Frame does not have dimple.

03-07-2015, 09:49 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 68 Small Window?? Look at the hole for the ignition switch. It is noticeable smaller. If the switch or bezel are still there, they will be noticeably smaller,too. The VIN tells the tale, but verify the dash just the same. If it is a '68 VIN it would be good to know if it's a left over small window that slipped through or a true fluke with '67 cab back panel and newer dash panel all in one __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-07-2015, 02:31 PM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 68 Small Window?? Great! It's threads like this that makes this site so much smarter than other sites. we have been sorting this type of stuff out for years so others can come along and benefit. It sure helps when a member goes to buy a truck __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2015, 11:18 AM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 68 Small Window?? TTT, because curious minds await __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.