desperate have to get inspection - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mesintex · 10-18-2002, 10:09 PM

cut key on and both reverse lights come on.cut on head lights and front running lights go off but blinkers still work.all kinds of work to this baby this is all i like to pass inspection.took tranny out of a 1 ton wrecker new heads, new intake manifold, new exhaust manifold and radiator.get inspection first road trip to houston for a sale on father in laws yaht in clear lake to galveston.PLEASE HELP

1971LT1SWBPOSI373 · 10-18-2002, 10:13 PM

Sounds like a bad ground, or no ground at all......

mesintex · 10-18-2002, 10:19 PM

think thats causing both problems

*Zkast* · 10-18-2002, 10:26 PM

Reverse lights:
I would start by checking your reverse light switch (auto on column, stick on trans) to see if the problem starts there. It most definatly could be a feedback problem from somewhere else but its best to check the actual circuit and KNOW its ok.

Parking lights:
Start by checking (front and rear) each bulb to make sure you have 1157's and that they are installed correctly. If there is a 1056 in there, you'll have crazy problems with the lights. If the bulbs are ok and installed correctly, start looking at grounds near the lights.

I'm confused on your parking lights though. Are you saying that the parking lights work fine if turned on, yet when the headlights are turned on they(only the front parking lights) go out?

Longhorn Man · 10-19-2002, 01:35 AM

mesintex, it's a 67 isn't it? The front parking lights are supposed to turn off when you turn on the headlamps...all GM vehicles (not sure bout the other brands) did this in 67 and before.
Not that you can convince the inspection station.
As for your back up lamps, they are not required in TX on a pick up. Pull off the lenses and take out the lights.
A ground would not cause this to happen, the turn signal works when the headlights are on, therefor, there is a ground there. The parking lights and the turn signals both use the same ground.

10-18-2002, 10:09 PM	#1
mesintex Registered User Join Date: Oct 2002 Location: emory,texas Posts: 3	desperate have to get inspection cut key on and both reverse lights come on.cut on head lights and front running lights go off but blinkers still work.all kinds of work to this baby this is all i like to pass inspection.took tranny out of a 1 ton wrecker new heads, new intake manifold, new exhaust manifold and radiator.get inspection first road trip to houston for a sale on father in laws yaht in clear lake to galveston.PLEASE HELP

10-18-2002, 10:13 PM	#2
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Sounds like a bad ground, or no ground at all...... __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

10-18-2002, 10:19 PM	#3
mesintex Registered User Join Date: Oct 2002 Location: emory,texas Posts: 3	think thats causing both problems

10-18-2002, 10:26 PM	#4
Zkast Account Suspended Join Date: May 2002 Location: Olathe, Kansas Posts: 929	Reverse lights: I would start by checking your reverse light switch (auto on column, stick on trans) to see if the problem starts there. It most definatly could be a feedback problem from somewhere else but its best to check the actual circuit and KNOW its ok. Parking lights: Start by checking (front and rear) each bulb to make sure you have 1157's and that they are installed correctly. If there is a 1056 in there, you'll have crazy problems with the lights. If the bulbs are ok and installed correctly, start looking at grounds near the lights. I'm confused on your parking lights though. Are you saying that the parking lights work fine if turned on, yet when the headlights are turned on they(only the front parking lights) go out?

10-19-2002, 01:35 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	mesintex, it's a 67 isn't it? The front parking lights are supposed to turn off when you turn on the headlamps...all GM vehicles (not sure bout the other brands) did this in 67 and before. Not that you can convince the inspection station. As for your back up lamps, they are not required in TX on a pick up. Pull off the lenses and take out the lights. A ground would not cause this to happen, the turn signal works when the headlights are on, therefor, there is a ground there. The parking lights and the turn signals both use the same ground.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.