The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-28-2019, 11:26 PM   #851
Vero67
Registered User
 
Join Date: May 2013
Location: Vero Beach FL
Posts: 290
Re: Power Steering Adapter Plates

Great thank you
Vero67 is offline   Reply With Quote
Old 05-02-2019, 08:18 PM   #852
Vero67
Registered User
 
Join Date: May 2013
Location: Vero Beach FL
Posts: 290
Re: Power Steering Adapter Plates

I received the part today, looks great! Thank you for the fast shipping.
Vero67 is offline   Reply With Quote
Old 06-19-2019, 11:26 PM   #853
l79m20
Registered User
 
Join Date: May 2005
Location: Reading, Kansas
Posts: 628
Re: Power Steering Adapter Plates

Need a power steering setup for a 1965 c10. Plate and items to shorten shaft. PM with info. Thanks.
l79m20 is offline   Reply With Quote
Old 06-19-2019, 11:32 PM   #854
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

PM sent

Quote:
Originally Posted by l79m20 View Post
Need a power steering setup for a 1965 c10. Plate and items to shorten shaft. PM with info. Thanks.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 06-20-2019, 06:52 AM   #855
Vero67
Registered User
 
Join Date: May 2013
Location: Vero Beach FL
Posts: 290
Re: Power Steering Adapter Plates

Thanks again, some information for 67 K10 owners. I used the original upper rear hole in the frame, then lined up my box and steering shaft. Scribed where the adaptor was, then marked and drilled the holes. Worked out great.
Vero67 is offline   Reply With Quote
Old 06-26-2019, 12:40 AM   #856
l79m20
Registered User
 
Join Date: May 2005
Location: Reading, Kansas
Posts: 628
Re: Power Steering Adapter Plates

Received the parts today. They look great as usual. Thank you so much.
l79m20 is offline   Reply With Quote
Old 06-26-2019, 11:21 PM   #857
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

Thank you for the compliment
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 07-06-2019, 01:46 PM   #858
kmabe
Registered User
 
Join Date: Feb 2017
Location: sneedville tn
Posts: 5
Re: Power Steering Adapter Plates

I need a power steering adaptor plate let me know what I need to do thanks
kmabe is offline   Reply With Quote
Old 07-06-2019, 11:03 PM   #859
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

I will send you a PM with ordering and payment info.

Quote:
Originally Posted by kmabe View Post
I need a power steering adaptor plate let me know what I need to do thanks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-05-2019, 02:22 AM   #860
bigdisplay442
Registered User
 
bigdisplay442's Avatar
 
Join Date: Nov 2015
Location: Whitehouse, Texas
Posts: 21
Re: Power Steering Adapter Plates

I installed my gearbox and plate months ago but I'm just now hooking up the pitman arm and the center link. My pitman arm is too long for the 1978 PS gearbox I'm using. What did I miss in the instructions that I no longer have? Which pitman arm was I suppose to use? The center link won't clear the engine cradle.
Thanks.....
bigdisplay442 is offline   Reply With Quote
Old 08-05-2019, 11:16 PM   #861
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

You should be using the 1978 C10 pitman arm. Are you sure it is installed all the way onto the sector shaft? Did you install the adapter plate according to the instructions and use the supplied template?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-16-2019, 10:57 AM   #862
Awats
Registered User
 
Join Date: Mar 2018
Location: Chichester ,West Sussex
Posts: 6
Re: Power Steering Adapter Plates

Hi Capt fab,will a power steering box from a 4x4 C10 fit my 66 burb with one of your brackets.Very few breakers here across the pond and shipping one over is very costly.
Awats is offline   Reply With Quote
Old 08-17-2019, 12:23 AM   #863
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

While the K series steering box will bolt up, the sector shaft is different and will not accept a C series pitman arm.

Quote:
Originally Posted by Awats View Post
Hi Capt fab,will a power steering box from a 4x4 C10 fit my 66 burb with one of your brackets.Very few breakers here across the pond and shipping one over is very costly.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 10-17-2019, 09:34 PM   #864
grubsster
Registered User
 
grubsster's Avatar
 
Join Date: Sep 2011
Location: N.C.
Posts: 133
Re: Power Steering Adapter Plates

Hi Captain.

I am getting the parts together to do the power steering swap. I used 72 C10 spindles and steering column when I did my power brakes/automatic trans swap. I have an undated power steering box that is standard so I am assuming 70's. Can I use my current pitman arm on the power box? Also since I have the collapsible column, I assume I should be able to just mount the rag joint to the box. Please PM with payment info for the plate and hardware. Also any advice would be greatly appreciated. Thanks
grubsster is offline   Reply With Quote
Old 10-17-2019, 10:45 PM   #865
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

You must use the pitman arm that is for the particular power steering box that you are using. You can NOT use the pitman arm from your original manual steering box.

The rag joint always bolts directly to the steering box input shaft. That is unless for some reason you are eliminating the rag joint all together and using a universal joint.

I will send you a PM with ordering and payment info.

Quote:
Originally Posted by grubsster View Post
Hi Captain.

I am getting the parts together to do the power steering swap. I used 72 C10 spindles and steering column when I did my power brakes/automatic trans swap. I have an undated power steering box that is standard so I am assuming 70's. Can I use my current pitman arm on the power box? Also since I have the collapsible column, I assume I should be able to just mount the rag joint to the box. Please PM with payment info for the plate and hardware. Also any advice would be greatly appreciated. Thanks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-08-2019, 12:46 AM   #866
T and S
Registered User
 
T and S's Avatar
 
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
Re: Power Steering Adapter Plates

Captainfab I need an adapter plate for a power steering box for a 1966 C-10. Also, will a collapsible intermediate shaft work with the power steering box on a 66'. I know I will have to cut off and modify the steering shaft at the column. Please send me PM on ordering info. Thanks !!
__________________
If you don't like this pound sand .....
T and S is offline   Reply With Quote
Old 11-08-2019, 12:49 AM   #867
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

Yes you can use a collapsible intermediate shaft. I will send you a PM with ordering info.

Quote:
Originally Posted by T and S View Post
Captainfab I need an adapter plate for a power steering box for a 1966 C-10. Also, will a collapsible intermediate shaft work with the power steering box on a 66'. I know I will have to cut off and modify the steering shaft at the column. Please send me PM on ordering info. Thanks !!
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-08-2019, 07:45 PM   #868
T and S
Registered User
 
T and S's Avatar
 
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
Re: Power Steering Adapter Plates

Payment and shipping info sent through paypal - Thanks !!
__________________
If you don't like this pound sand .....
T and S is offline   Reply With Quote
Old 11-08-2019, 11:40 PM   #869
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

Payment received. I will ship your order on Tuesday since Monday is Veterans Day.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-16-2019, 12:42 PM   #870
T and S
Registered User
 
T and S's Avatar
 
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
Re: Power Steering Adapter Plates

Parts received - Thanks !
__________________
If you don't like this pound sand .....
T and S is offline   Reply With Quote
Old 11-17-2019, 12:16 AM   #871
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

Thank you for the purchase
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-05-2019, 12:40 PM   #872
Patinatruck
Registered User
 
Join Date: Feb 2019
Location: Charleston, South Carolina
Posts: 1
Re: Power Steering Adapter Plates

Quote:
Originally Posted by Captainfab View Post
Thank you for the purchase
Jon,

I need a an adapter to convert my 65 c10 to power please send me pm with details on how to order, thanks!
Patinatruck is offline   Reply With Quote
Old 12-05-2019, 11:15 PM   #873
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

I replied to the email you sent me this morning. Did you not receive it?

Quote:
Originally Posted by Patinatruck View Post
Jon,

I need a an adapter to convert my 65 c10 to power please send me pm with details on how to order, thanks!
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-26-2019, 10:59 PM   #874
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Power Steering Adapter Plates

Due to an increase in the cost of the laser cutting, I have had to increase the cost of the steering box adapter plates.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 01-02-2020, 12:19 PM   #875
Dieman63
Registered User
 
Join Date: Mar 2019
Location: Mineral wells,Texas
Posts: 2
Re: Power Steering Adapter Plates

PM sent
Dieman63 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:19 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com