Blazer double wall Top (help) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luis_gz06 · 09-17-2006, 04:44 PM

Whats up people. I inspected my double wall top underneath where the bolts attaches to the bedside and found out that theres plenty of lug nuts where the bolts go missing. Does anyone out there know if those could be redone or fixed. Im very concerned about that cause how the hell would i bolt the top back to the Blazer the way it suppose to be without those welded lug nuts inside the top. Any good ideas would be appreciated.

Thanks, Luis.

LUV2XCLR8 · 09-17-2006, 07:26 PM

Me personally, if you have a double wall AND interior panels, why even
bother with the side bolts, put you in some smaller threaded studs and
cover them with clear aquarium tubing, then they will function like dowl
pins, just the 2 visor mounts & the 2 rare braces is enough to keep it on
I mean come on, it's not like a t-top that's gonna blow away, my $.02

krue · 09-17-2006, 09:07 PM

May have noise, squeaking issues that way luv? I don't know.

LUV2XCLR8 · 09-17-2006, 09:35 PM

Quote:

Originally Posted by krue

May have noise, squeaking issues that way luv? I don't know.

It's possible, but it's alot cheaper to try it than having a fiberglass top worked on

kyle4381 · 09-17-2006, 10:49 PM

My top was the same way I just made new nut plates and everglassed them back in and re riveted the ones that were loose. I fixed the cracks along that bottom edge also.

71jimmy · 09-18-2006, 01:41 AM

Quote:

Originally Posted by kyle4381

My top was the same way I just made new nut plates and everglassed them back in and re riveted the ones that were loose. I fixed the cracks along that bottom edge also.

YUP, me too!!!!!!! Not that difficult, chances are the top needs repair anyway. I'm almost done refurbishing my liftgate. It'll be a few more weeks before it's back on, I'll post some pics then. I had quite a bit of damage/cracks etc on the top and liftgate so it's taken me several months to do, couple hrs here couple hrs there, but I'm almost done. Just wanted to fix the big problems so I can have my top on for the rust repair, but I got carried away, I hate doing things twice.

Luis_gz06 · 09-18-2006, 08:43 AM

Kyle, whats everglassed mean? And how did you put the new nut plates back on? Luis.

kyle4381 · 09-18-2006, 12:44 PM

Everglass is a brand of short strand reinforced body filler.. I cut out the nut plates out, re-positioned them and gooped the Everglass on to hold them in place. I then did the rest of the bodywork on that edge..

Luis_gz06 · 09-18-2006, 01:00 PM

Kyle, thanks for your reply. Now, do you know who specialiazes in fixing those tops or anyone. Luis.

09-17-2006, 04:44 PM	#1
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Blazer double wall Top (help) Whats up people. I inspected my double wall top underneath where the bolts attaches to the bedside and found out that theres plenty of lug nuts where the bolts go missing. Does anyone out there know if those could be redone or fixed. Im very concerned about that cause how the hell would i bolt the top back to the Blazer the way it suppose to be without those welded lug nuts inside the top. Any good ideas would be appreciated. Thanks, Luis.

09-17-2006, 07:26 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Blazer double wall Top (help) Me personally, if you have a double wall AND interior panels, why even bother with the side bolts, put you in some smaller threaded studs and cover them with clear aquarium tubing, then they will function like dowl pins, just the 2 visor mounts & the 2 rare braces is enough to keep it on I mean come on, it's not like a t-top that's gonna blow away, my $.02 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-17-2006, 09:07 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Blazer double wall Top (help) May have noise, squeaking issues that way luv? I don't know. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-17-2006, 10:49 PM	#5
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: Blazer double wall Top (help) My top was the same way I just made new nut plates and everglassed them back in and re riveted the ones that were loose. I fixed the cracks along that bottom edge also.

09-18-2006, 08:43 AM	#7
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Blazer double wall Top (help) Kyle, whats everglassed mean? And how did you put the new nut plates back on? Luis.

09-18-2006, 12:44 PM	#8
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: Blazer double wall Top (help) Everglass is a brand of short strand reinforced body filler.. I cut out the nut plates out, re-positioned them and gooped the Everglass on to hold them in place. I then did the rest of the bodywork on that edge..

09-18-2006, 01:00 PM	#9
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Blazer double wall Top (help) Kyle, thanks for your reply. Now, do you know who specialiazes in fixing those tops or anyone. Luis.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.